2 year Warranty
With the PCE-890U Condition Monitoring Infrared Thermometer, measurements of surface temperatures can be carried out quickly and easily. Since the infrared thermometer uses infrared radiation for temperature measurement, no direct contact with the measuring object is required. The infrared thermometer makes it easy to measure objects from a distance that are difficult to access.
- Measuring range: -50 ... 1150 °C / -58 ... 2102 °F
- Accuracy: ± 1.5% ± 2 °C / 3.6 °F (0 ... 500 °C / 32 ... 932 °F)
- Resolution: 0.1°C / 0.18°F (<1000 °C / 1832 °F)
- Emission level: 0.1 ... 1
With the PCE-890U infrared thermometer, measurements of surface temperatures can be carried out quickly and easily. Since the infrared thermometer uses infrared radiation for temperature measurement, no direct contact with the measuring object is required. The infrared thermometer makes it easy to measure objects from a distance that are difficult to access.
- Measuring range: -50 ... 1150 °C / -58 ... 2102 °F
- Accuracy: ± 1.5% ± 2 °C / 3.6 °F (0 ... 500 °C / 32 ... 932 °F)
- Resolution: 0.1°C / 0.18°F (<1000 °C / 1832 °F)
- Emission level: 0.1 ... 1
The infrared imaging camera was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the infrared imaging camera can be adjusted, depending on the operation purpose. Besides taking infrared images, the infrared imaging camera can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.
- Measurement range: -20 ... +600°C / -4 ... 1112°F
- Accuracy: ± 2%, ± 2°C / 3.6°F
- Frequency image recording: 9 Hz
- Camera: 32 x 31 Pixel
The handheld wall moisture meter is for accurate measurement of the moisture content of paper, wood and building materials. The wall moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the wall moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.
- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%
The relative pressure manometer PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this pressure manometer in the range between -100 ... 2000 kPa. The relative pressure manometer PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.
- Measuring range pressure: -100 ... 2000 kPa relative / -14.5 ... 290 PSI
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: <± 0.5% of the measuring range
- USB interface
- Data logger
- Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF
The infrared imaging camera was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the infrared imaging camera can be adjusted, depending on the operation purpose. Besides taking infrared images, the infrared imaging camera can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.
- Measurement range: -20 ... +600°C / -4 ... 1112°F
- Accuracy: ± 2%, ± 2°C / 3.6°F
- Frequency image recording: 9 Hz
- Camera: 32 x 31 Pixel
- incl. ISO Calibration Certificate
PCE-TDS 100HSH is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.
- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 700, 20 … 720 mm
- Sensor temperature range: 32 ... 320°F
- Sensor installation: V, (N,W)
- incl. sensors TDS-M1 and TDS-S1