PCE Instruments

PAT Tester / Portable Appliance Testing Equipment

Order no.: PCE-EVSE 300
Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special PAT Tester are required to check the function, the protective devices and the insulation.

- CP and PP simulation
- Direct connection for wallboxes
- Adapter with charging plugs Type 1 and Type 2
- CP simulation (communication line) A, B, C, D, error
Manufacturer: PCE Instruments
£ 379.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-ITE 50

The PCE-ITE 50 is a robust PAT Tester with a large 3.5" TFT color LCD display. The PAT Tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.


- 3.5" color TFT LCD display
- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- SD card and Bluetooth
- Dual display
- Good / bad FI test
- Low Ohm measurement
- Up to 1000V terminal voltage

Manufacturer: PCE Instruments
£ 818.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IT55
The PAT Tester determines insulation resistance up to a maximum of 2000 MΩ (for auxiliary voltages of 250, 500 and 1000V). This PAT Tester also offers the ability to measure alternate and continuous currents up to a maximum 750V / 1000V and resistance up to 2 kΩ.

 

- Measuring ranges AC voltage: 0 ... 750V
- Resolution AC voltage: 1V
- Accuracy AC voltage: ± 1.2% ± 10 dgts
- Complies with IEC1010-1, CAT III 1000V
- Large display with backlight
- Individual measurement and duration measurement

Manufacturer: PCE Instruments
£ 174.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IT100
The PAT Tester detects with auxiliary voltages of 125V, 250V, 500V and 1000V insulation resistors up to max. 4000 MΩ. Furthermore, the measurement of low-resistance resistors up to 400 Ω and a measurement function for alternating and also DC voltages is offered by this PAT Tester.

- AC voltage (40 ... 400 Hz): 750V
- DC voltage: 1000V
- Resistance: 40 Ω / 400 Ω
- Insulation resistance: 4 MΩ / 40 MΩ / 400 MΩ / 4000 MΩ
- 4 different test voltages up to 1 kV
- Auto power-off function
- Safety: EN 61010-1, CAT III 1000V
Manufacturer: PCE Instruments
£ 215.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-ITM 20
This PAT Tester combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this PAT Tester is also equipped with a frequency and capacitance measurement.

- Automatic range selection
- Capacitance measurement
- Integrated isolation tester
- Internal memory
- To IEC 1010, CAT III 1000V, CAT IV 600V
- Frequency measurement
Manufacturer: PCE Instruments
£ 303.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-ET 3000
This PAT Tester is used to measure lightning-arresters or ground connection lightning-arresters for all kind of buildings. earth tester possesses a hermetic case and fulfils all the VDE 0413 safety requirements for the technical service operators. 

- Range: 0 ... 19.99/ 0 ... 199/ y 0 ... 1999 Ω. and 0 ... 200 V AC 50/60 Hz
- Resolution: 10/ 100 mΩ / 1 Ω. and 0.1 V
- Accuracy: ± 2% + 2 positions and ± 3% + 2 positions.
- Lower measurement limit.: 0.01 Ω.
- Current of measurement: 2 mAeff / rms
Manufacturer: PCE Instruments
£ 379.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IT 120
The PAT Tester detects insulation resistance up to max. 8 GΩ (with auxiliary voltages of 250, 500 and 1000V). In addition, this PAT Tester offers a measuring function for DC and AC voltages up to max. 950V DC and 700V AC as well as resistors up to max. 2 kΩ.

- DC test voltage: 250/500 / 1000V
- OLED display
- Automatic polarity display
- Automatic range selection
- PI and DAR test
- Degree of protection / standardization: IEC 1010-1, 700V CAT III
Manufacturer: PCE Instruments
£ 488.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IT413
The PAT Tester belongs to a series of highly accurate resistance devices that have a 6 digit display. These PAT Testers have been developed specifically for technical service and for difficult measurement conditions.

- For professionals
- 6 digit LCD
- Measurements according to VDE 0413 part 1
- Test tension up to 5,000V

Manufacturer: PCE Instruments
£ 716.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IT414
The PAT Tester belong to a series of highly accurate resistance devices that have a 6 digit display. These PAT Testers have been developed specifically for technical service and for difficult measurement conditions.

- For professionals
- 6 digit LCD
- Measurements according to VDE 0413 part 1
- Test tension up to 10,000V

Manufacturer: PCE Instruments
£ 855.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-ET 5000
The PAT Tester is a versatile ohmmeter. With this earth tester / earth resistance meter a variety of resistance measurements can be performed. Thus, with the PAT Tester, the possibility exists to perform a normal resistance measurement of 2- or 4-pole application.

- Interference currents, interference voltages, frequencies
- Direct and indirect resistance measurement
- Data memory for later analysis on the PC
- Mobile use thanks to battery and batteries
Manufacturer: PCE Instruments
£ 2,401.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-ECT 50-UK
The PAT Tester is a handy measuring device. Due to the robust and ergonomic design, the user can work comfortably with the PAT Tester. The earthing resistance can be determined quickly with the PAT Tester.

- Measuring range: 0 ... 2000 Ω
- Measuring principle: Continuity test / earth resistance measurement
- Multi-coloured, backlit LCD
- Installation category III
- 50/60 Hz operating voltage
Manufacturer: PCE Instruments
£ 123.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-EVSE-KIT2
The Portable Appliance Testing Equipment  is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the PAT Tester. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation.

- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- Up to 1000 V terminal voltage
- Low Ohm measurement
- Direct connection for wallboxes
- Adapter with charging plugs type 1 and type 2
- PE conductor test
- Integrated Schuko socket
Manufacturer: PCE Instruments
£ 1,152.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-EVSE-KIT2-ICA
An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The PAT Tester is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the PAT Tester. 

- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- Up to 1000 V terminal voltage
- Low Ohm measurement
- Direct connection for wallboxes
- Adapter with charging plugs type 1 and type 2
- PE conductor test
- Integrated Schuko socket
- incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)
Manufacturer: PCE Instruments
£ 1,368.00

Price excl. VAT &. delivery
2 year Warranty