Environmental Tester

The environmental tester is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental tester is a class 2 device and is equipped with an octave band frequency filter. The environmental tester can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Including class II sound calibrator

The environmental tester is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental tester is a class 2 device and is equipped with an octave band frequency filter. The environmental tester can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator

The environmental tester PCE-428-EKIT-ICA, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental tester is equipped with an octave band frequency filter. Optionally, the environmental tester can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with an environmental meter over a long period of time, even in the rain.

 

- Accuracy class 2 
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- incl. outdoor noise level meter kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise
- incl. ISO calibration certificate

PCE-322A is a handheld, portable, professional Class II sound level meter or decibel (dB) meter with built-in data-logging or data-recording functionality for environmental testing. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time.

- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option

The environmental tester measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the environmental tester can measure the volume flow and the ambient temperature.

- Measuring range: 0.3 ... 30.0 m/s / 0.98 ... 98.4 ft/s
- Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
- Probe diameter: Ø0.8 ... 1.2 mm / 0.031 x 0.047"
- Data memory for 960 measured values
- Wind speed
- Volume flow
- Temperature measurement

The environmental tester is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The environmental tester has a logger function, which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The environmental tester measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the environmental tester can measure the volume flow and the ambient temperature.

- Measuring range: 0.3 ... 30.0 m/s / 0.98 ... 98.4 ft/s
- Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
- Probe diameter: Ø0.8 ... 1.2 mm / 0.031 x 0.047"
- Data memory for 960 measured values
- Wind speed
- Volume flow
- Temperature measurement
- incl. ISO Calibration Certificate (wind speed function only)

The environmental tester is a handheld, portable, professional Class II noise meter, sound meter or decibel (dB) meter with built-in data-logging or data-recording functionality. Thus, the environmental tester is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time.

- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option
- Incl. calibration certificate

- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation


Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

The PCE-VA 20 is a versatile environmental tester for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This environmental tester device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate 

This environmental tester with outside sensor is a real all-rounder. The wireless environmental tester with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless environmental tester and outside sensors. The weather data of the environmental tester with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.

- 3 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km/h, m/s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

The environmental tester PCE-318 detects the volume from a sound level of 26 dB (A). The environmental tester is ideal for measuring very low noises, for example, noises from computer fans. The device has a very high accuracy of ± 1.5 dB.

- Measuring range: 26...130 dB 
- Accuracy: ±1.5 dB
- Frequency: 31.5...8000 Hz
- A and C rating
- Fast and. slow time evaluation

The class II environmental tester with jumbo display (and at an excellent price / performance ratio) is ideal for measurements of sound and noise in different environments, at work, condition monitoring, etc.

- Measuring range: 26...130 dB 
- Accuracy: ±1.5 dB
- Frequency: 31.5...8000 Hz
- A and C rating
- Fast and. slow time evaluation
- incl. ISO Calibration Certificate

 

Calibration certificates are issued specifically for the customer and are excluded from the right of return.

This environmental tester has a good relation between price and quality and it combines accuracy and versatility with the ability to transfer data directly to a computer. This environmental tester forms a part of a professional's basic equipment to regulate and test ventilation systems. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.

- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current:  0 ... 36,000 m³/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec

The environmental tester is used to measure the pH of viscous media. Thanks to the flat pH electrode, the environmental tester is particularly well suited for the measurement of the pH value of sludges or viscous media such as oils and creams. The measuring range of the environmental tester ranges from -1 ... 15 pH, and it has an internal calibration function with up to 3 interpolation points.

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F
- Flat pH electrode
- Automatic temperature compensation
- For viscous liquids
- incl. ISO Calibration Certificate

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F  
- Flat pH electrode with long shaft
- Automatic temperature compensation
- For small sample quantities
- incl. ISO Calibration Certificate

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media or water based

The class 1 data-logging environmental tester meets all requirements for noise measurement and frequency analysis. This integrating precision pulse environmental tester complies with all applicable standards and guidelines.

- Accuracy class 1
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional