Climate Meter

The climate meter measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the climate meter can measure the volume flow and the ambient temperature.

- Measuring range: 0.3 ... 30.0 m/s / 0.98 ... 98.4 ft/s
- Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
- Probe diameter: Ø0.8 ... 1.2 mm / 0.031 x 0.047"
- Data memory for 960 measured values
- Wind speed
- Volume flow
- Temperature measurement

The climate meter measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the climate meter can measure the volume flow and the ambient temperature.

- Measuring range: 0.3 ... 30.0 m/s / 0.98 ... 98.4 ft/s
- Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
- Probe diameter: Ø0.8 ... 1.2 mm / 0.031 x 0.047"
- Data memory for 960 measured values
- Wind speed
- Volume flow
- Temperature measurement
- incl. ISO Calibration Certificate (wind speed function only)

The PCE-VA 20 is a versatile climate meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This climate meter device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate 

This climate meter with outside sensor is a real all-rounder. The wireless climate meter with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless climate meter and outside sensors. The weather data of the climate meter with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.

- 3 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km/h, m/s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

PCE-WSAC 50 is a climate meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This climate meter alarm controller allows measurement of the slightest of wind movements. The climate meter alarm controller is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.

- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

- Temperature measuring range: 0.0 … 50.0 °C
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20 mA input signal
- Wall mounting

- Temperature measuring range: 0.0 … 50.0 °C
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20 mA input signal
- Wall mounting
- incl. ISO Calibration Certificate

The temperature / humidity climate meter is a data logger has a memory of 20,010 sets of measurements and allows use of up to several months. The temperature / humidity climate meter is particularly suitable for measuring tasks where it is not possible for the user to install software for reading the measured values.

- Measuring range temp.: -30 ... 60 °C / -22 ... 140 °F
- Measuring range rel. humidity: 0 ... 100% RH
- Measurement protocol as PDF
- Data export possible as CSV
- Readable without software
- 20,010 sets of measured values can be stored
- incl. ISO Calibration Certificate

The PCE-313A climate meter measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313A climate meter can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the climate meter to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition.

- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)
- Incl. ISO Calibration Certificate

PCE-HVAC 3 is a multifunction climate meter, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.

- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

PCE-VA 20 is a climate meter for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This climate meter features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
  measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1

 

The PCE-VA 20-SET is a multi-functional climate meter including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted climate meter incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
  measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1°C / 0.18°F
- Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346
  mm / 13.6 x 13.6 in)
- Incl. ISO Calibration Certificate

The climate meter is a measuring device for orienting measurement of temperature and relative humidity. With a temperature measuring range of -10 ... 50 °C and a humidity measuring range of 20 ... 90% RH the climate meter covers a wide range of tasks.

- Measuring range temperature: -10 ... 50 °C / 14 ... 122 °F
- Measuring range humidity: 20 ... 90% RH
- Selectable units
- Various measuring functions

PCE-444 is a combination digital hygrometer and digital thermometer used to measure air temperature, relative humidity, dew point temperature and wet bulb temperature. This portable handheld pocket-sized mini thermo-hygrometer allows for the quick and easy determination of indoor ambient environmental conditions.

- Humidity measuring range: 0 ... 100% relative humidity (RH)
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Resolution: 0.1%, °C, °F

PCE-MAM 2 is a lightweight portable handheld pocket-sized mini anemometer, wind speed meter or air velocity measuring device with an impeller wheel sensor that is ideal for determining air or wind speeds inside or out. This mini anemometer allows you to take velocity and temperature measurements quickly and on the spot.

- Velocity measuring range: 0.4 ... 30 m/s (0.9 ... 67 mph)
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Displays velocity measurements in m/s, km/h, mph, knots or ft/min
- Impeller wheel sensor for air or wind speed
- Colour display

The climate meter records the air temperature and humidity and stores them internally. The compact climate meter with a large memory (up to a maximum of 16,000 values) is primarily used for long-term registration, for example in the food sector (e.g. refrigerated counters in supermarkets, refrigerated transport, warehouses) or in the industrial sector (heating and cooling processes, machine temperatures, product warehouses...)

- Measuring range temperature: -40 ... 85 °C
- Measuring range rel. humidity: 0 ... 100%
- Max. 16,000 data records can be saved
- Export to software possible
- 450 day running time
- Adjustable storage rate from 1 second