PCE Instruments

Humidity Detector

Order no.: PCE-VDL 16I
The humidity detector PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this humidity detector is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313A-ICA

The PCE-313A handheld humidity detector measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313A handheld humidity detector can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the handheld humidity detector to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 3

PCE-HVAC 3 is a multifunction humidity detector, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FWS 20

The PCE-FWS 20 Humidity Detector Station is a multi-functional wireless digital device that will exceed your expectations. This manufacturer-calibrated meteorological instrument accurately measures temperature, relative humidity, precipitation, atmospheric pressure, wind speed and wind direction. Featuring a free-standing or wall-mountable touchscreen LED display with backlight, the PCE-FWS 20 makes a fantastic gift.


- Indoor temperature in Celsius or Fahrenheit
- Outdoor temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor humidity
- Air pressure indication in Hg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indicator in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month.
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind Chill Temperature Display
- Weather forecast, tendency indicator, storm warning 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FWS 20-1

The Humidity Detector combines various functions and sensors in only one instrument: Air Humidity Meter, Wind direction, Wind speed, Temperature meter, rainfall, and data logger. Furthermore, the meteorological station has different alarm functions and settings for the measurement parameters. The measured data can be sent by radio to the base unit (max. distance of 100 m). This test instrument is equipped with the latest technology used in meteorological analysis. The touch screen allows you to recall data onto the screen easily.


- 2 Displays
- Wireless Weather Station
- Touchscreen
- Windows software
- Data logger

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FWS 20-2

The PCE-FWS 20 Humidity Detector is for private and professional use. This meteorological station allows the accurate detection of wind direction, wind speed, temperature, relative humidity and precipitation.  The USB port and the included cable allows transmission of data from the device to a computer. Software for analysing data is also included, which enables you to analyse and check meteorological fluctuations, presenting data in graphs and diagrams for measurements over prolonged periods of time.


- 3 Displays
- Wireless Weather Station
- Touchscreen
- Windows software
- Data logger

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THA 10-ICA

The Multifunction Humidity Detector PCE-THA 10 is easy to operate with one hand thanks to its compact size, the new structure and integrated impeller. In addition to the humidity, the humidity detector measures the temperature, wind speed, dew point, the wet bulb temperature and the air volume. Average wind speed values can be determined with the humidity detector from the 20 preset points.


- Temperature measuring range: -15 ... 50°C / 5 ... 122°F
- Humidity range: 5 ... 95% RH
- Air speed: 0.4 ... 35 m / s
- Air flow: 0 ... 9.999 m3 / s
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 50
The humidity detector PCE-HT 50 is suitable for continuous monitoring of the room climate. This is how the humidity detector finds its application in homes or at work. The humidity detector has an internal sensor for air temperature and humidity. 

- Measures temperature and humidity
- With second external cable temperature sensor
- Display of date and time
- With alarm function
- Battery operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-444

PCE-444 is a combination digital hygrometer and digital thermometer used to measure air temperature, relative humidity, dew point temperature and wet bulb temperature. This portable handheld pocket-sized mini thermo-hygrometer allows for the quick and easy determination of indoor ambient environmental conditions.


- Humidity measuring range: 0 ... 100% relative humidity (RH)
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Resolution: 0.1%, °C, °F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TH 5

The Humidity Detector PCE-TH 5 is a universal temperature / humidity gauge which allows the measurement of both the ambient temperature and the ambient humidity, as well as the determination of the dew point and wet bulb temperature.


- Temperature measuring range: -20 ... 50°C / -4 ... 122°F
- Humidity measuring range: 0 ... 99.9% r.H.
- Resolution: 0.1°C / 0.18°F, 0.1% relative humidity
- Measurement accuracy: ±3% r.H. / ±0.6°C / 1.08°F
- Calculation of dew point and wet bulb temperature

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ITF 5
The PCE-ITF 5 humidity detector is used to measure the humidity, temperature and surface temperature simultaneously. This humidity detector PCE-ITF 5 is ideal for detecting heat bridges and incorrect ventilation behavior in homes, houses, etc.

- Infrared temperature : -50 ... 550°C / -58 ... 1022°F
- Air temperature: -45 ... 60°C / -49 ... 140°F
- Humidity: 0 ... 100% rh
- 12: 1 spot size ratio
- Circular laser
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 71N

The PCE-HT 71N Humidity Detector detects air temperature and humidity and stores readings in its internal memory. The Humidity Detector has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a Humidity Detector in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.


- Measurement range: 0 ... 100% RH / -35 ... 70°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BTH 10
The PCE-BTH 10 is a compact and easy-to-use Bluetooth humidity detector. This Bluetooth humidity detector is characterized by its simple one-button operation and integrated interface. The Bluetooth humidity detector PCE-BTH 10 measures the air temperature and humidity.

- Measuring range temperature: -20 ... 60°C / -4 ... 140°F
- Humidity measuring range: 0.01% RH
- Dew point
- Wet bulb temperature
- Bluetooth interface
- iOS and Android compatible
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 72
The humidity detector PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the humidity detector PCE-HT 72 to use up to several months. The PCE-HT 72 humidity detector is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

- Measuring range Temp.: -30 ... 60°C / -22 ... 140°F
- Measuring range rel. Humidity: 0 ... 100% rh
- Measurement protocol as PDF
- Data export possible as CSV
- Readable without software
- 20,010 sets of measured values can be stored
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-555

PCE-555 is a combination digital hygrometer and digital thermometer used to measure relative humidity as well as air temperature, dew-point temperature and wet-bulb temperature. This handheld multifunctional meter allows for quick and easy analysis of environmental conditions indoors and outdoors.


- Humidity measuring range: 0 ... 100 % relative humidity (rh)
- Temperature measuring range: -30 ... 100°C / -22 ... 212°F
- Resolution: 0.01 % rh / 0.01°C or 0.018°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 886

PCE-EM 886 is a portable handheld multifunctional digital device used to measure sound, light, humidity, temperature, AC / DC current, electrical resistance, capacitance and frequency.


- Sound: 35 ...100 dB
- Light: 4,000 ... 40,000 lux
- Humidity: 33 ... 99% RH
- Temperature: 0 ... 50°C Indoor, -20 ... 1300ºC Type K
- Auto-ranging electrical multimeter

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THA 10

The Multifunction Humidity Detector PCE-THA 10 is easy to operate with one hand thanks to its compact size, the new structure and integrated impeller. In addition to the wind speed, the Humidity Detector measures the temperature, humidity, dew point, the wet bulb temperature and the air volume. Average values can be determined with the Humidity Detector from the 20 preset points.


- Temperature measuring range: -15 ... 50°C / 5 ... 122°F
- Humidity range: 5 ... 95% RH
- Air speed: 0.4 ... 35 m / s
- Air flow: 0 ... 9.999 m3 / s

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 112
The humidity detector PCE-HT 112 is compact, very small and equipped with a display. The PCE-HT 112 humidity detector records the temperature and humidity indoors with its integrated sensor and simultaneously displays it via the LCD display.

Measuring function
- Temperature: -30 ... 65°C / -22 ... 149°F (Internal)
                          -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% RH (Internal & External)
- Memory for 25,920 readings
- Saves as PDF
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 882

PCE-EM 882 is a portable, handheld, multifunctional digital device capable of measuring four different physical parameters. An ideal tool for use in industrial hygiene, HVAC performance assessment and environmental condition monitoring applications, this easy-to-use measuring instrument includes sensors for measuring sound, light, temperature and relative humidity.


- Sound: Low and high A- and C-weighted noise measurements
  from 35 ... 130 dB
- Light: 20, 200, 2000, 20000 lux ranges
- Temperature: Range from -20 ... 750ºC / -4 ... 1400ºF
- Relative humidity (RH): Range from 25 ...95% RH 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 05
The humidity detector PCE-RCM 05 is used to continuously measure the particulate matter content at the workplace. The humidity detector displays PM2.5 particulate matter as well as temperature and humidity on the display. 

- Measuring range PM2.5: 0 ... 500 μg / m³
- Measuring range temperature: -10 ... 50°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Pictograms indicate air quality
- Battery operation
- Micro USB for charging
Manufacturer: PCE Instruments
Test Instruments manufacturer