Infrared Imaging Camera

The people counter infrared imaging cameras of the IRC5706-MW Gazelle series are infrared based and record people through their heat signature as soon as they step on the sensor field. A counting process is triggered when one of the up to 16 freely definable counting lines is exceeded.

- 60° field of view
- Mounting height: 2.2 m ... 4.8 m
- Detection range: 2 ... 4.5 m
- Detection speed: 0.5 m/s ... 3 m/s
- Data protection-compliant people counting

The people counter infrared imaging camera IRC 5106-NW is used as an additional people counter for the master unit. The people counter is used for wide entrances or if several entrances and exits are to be monitored.

- 60° field of view
- Mounting height: 2.2 m ... 4.8 m
- Detection range: 2 ... 4.5 m
- Detection speed: 0.5 m/s ... 3 m/s
- Data protection-compliant people counting
- Node / slave unit (a master unit is required)

The people counter infrared imaging cameras of the IRC5704-MW Gazelle series are infrared based and record people through their heat signature as soon as they step on the sensor field. A counting process is triggered when one of the up to 16 freely definable counting lines is exceeded.

- 40° field of view
- Mounting height: 3.5 m ... 7.5 m
- Detection range: 2 ... 4.5 m
- Detection speed: 0.5 m/s ... 3 m/s
- Data protection-compliant people counting

The people counter infrared imaging camera IRC 5104-NW is used as an additional people counter for the master unit. The people counter is used for wide entrances or if several entrances and exits are to be monitored.

- 40° field of view
- Mounting height: 3.5 m ... 7.5 m
- Detection range: 2 ... 4.5 m
- Detection speed: 0.5 m/s ... 3 m/s
- Data protection-compliant people counting
- Node / slave unit (a master unit is required)

The people counter infrared imaging camera of the IRC5729-MW Gazelle series are infrared based and record people through their heat signature as soon as they step on the sensor field. A counting process is triggered when one of the up to 16 freely definable counting lines is exceeded.

- 90° field of view
- Mounting height: 2.5 m ... 4.8 m
- Detection range: 3.2 ... 6.2 m
- Detection speed: 0.5 m/s ... 3 m/s
- Data protection-compliant people counting

The people counter infrared imaging camera of the IRC5716-MW Gazelle series are infrared based and record people through their heat signature as soon as they step into the sensor field. In addition, they are equipped with a real image camera, which can be used to check the sensor's detection area.

- 60° field of view
- Mounting height: 2.2 m ... 4.8 m
- Detection range: 2 ... 4.5 m
- Detection speed: 0.5 m/s ... 3 m/s
- With real image camera

Multimeter with 11 measuring functions
- AC voltage AC V TRMS
- DC voltage DC V
- AC and DC AC + DC TRMS
- AC AC TRMS
- AC and DC AC + DC TRMS
- DC DC A
- Resistance
- Capacity
- Frequency
- Diode test
- Continuity test
- Thermal image
- Bluetooth interface

The Vector 4D people counter infrared imaging camera is the most advanced people counter in the world. The time of flight measurement method does not just allow people to be counted, but rather to recognize them. The people counter works completely anonymously and in compliance with data protection regulations.

- Mounting height: 2 ... 4.5 m
- Detection range: 1.6 ... 5.1 m
- Acquisition speed: max. 5 m/s
- Data protection-compliant people counting
- Employee recognition
- Height measurement
- Connection of 4 people counters possible

The Vector 4D people counter infrared imaging camera is the most advanced people counter in the world. The time of flight measurement method does not just allow people to be counted, but rather to recognize them. The people counter works completely anonymously and in compliance with data protection regulations.

- Mounting height: 2 ... 4.5 m
- Detection range: 1.6 ... 5.1 m
- Acquisition speed: max. 5 m/s
- Data protection-compliant people counting
- Employee recognition
- Height measurement
- Connection of 32 people counters possible
- Dwell measurement

The Vector 4D people counter infrared imaging camera is the most advanced people counter in the world. The time of flight measurement method does not just allow people to be counted, but rather to recognize them. The people counter works completely anonymously and in compliance with data protection regulations. The Vector 4D - SafeCount people counter is equipped with special firmware that allows the number of customers in a store to be measured quickly and easily.

- Mounting height: 2 ... 4.5 m
- Detection range: 1.6 ... 5.1 m
- Acquisition speed: max. 5 m/s
- Data protection-compliant people counting
- Employee recognition
- Height measurement
- Connection of 32 people counters possible
- Dwell measurement
- People counter for secure access control

The infrared imaging camera was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the infrared imaging camera can be adjusted, depending on the operation purpose. Besides taking infrared images, the infrared imaging camera can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.

- Measurement range: -20 ... 300°C / -4 ... 572°F
- Accuracy: ± 2%, ± 2°C / 3.6°F
- Frequency image recording: 9 Hz
- Camera: 32 x 31 Pixel

PCE-TC 29 is an infrared imaging camera used for visual inspection and non-contact infrared (IR) temperature measurement. Ideal for industrial use in electrical, mechanical, and building installations (such as in the auditing of machines, engines, or heating, ventilation, and air conditioning (HVAC) systems), this affordable infrared imager captures and saves 60 x 60 pixel IR resolution images to the included MicroSD card memory.

- IR Resolution: 60 x 60 pixels
- Temperature measuring range: -20 ... 300°C / -4 ... 572°F
- IR image, visual image, picture-in-picture
- Hot / cold spot localisation
- Field of view: 20 x 20°
- Adjustable emissivity from 0.1 ... 1.0
- Frequency image recording: 6 Hz
- Data storage: Micro SD 

- IR resolution: 160 x 120 pixels
- Measuring range: -20 ... 450°C / -4  ... 842°F 
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function

- IR resolution: 220 x 160 pixels
- Measuring range: -20 ... 300°C / -4  ... 572°F
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function

The infrared imaging camera is a fully radiometric operating device for recording and display of temperature-based images and temperature-based profiles of the object in operates on. The infrared imaging camera does not only work with the latest technology due to its USB 2.0 interface, which allows a real-time thermographic imaging with 96 images per second and simultaneous image-recording with 32 Hz, but it also efficient due to stationary as well as portable application.

- Detector with 382 x 288 pixels
- Infrared camera in real time with up to 80 Hz
- Excellent thermal sensitivity
- USB 2.0 interface

N.B. see the PCE-PI 450 for alternative thermal sensitivity and operating/storage temperature

The infrared imaging camera is a fully radiometric operating device for recording and display of temperature-based images and temperature-based profiles of the object in operates on. The infrared imaging camera does not only work with the latest technology due to its USB 2.0 interface, which allows a real-time thermographic imaging with 96 images per second and simultaneous image-recording with 32 Hz, but it also efficient due to stationary as well as portable application.

- Detector with 382 x 288 pixels
- Infrared imaging in real time with up to 80 Hz
- Excellent thermal sensitivity
- USB 2.0 interface

N.B. see the PCE-PI 400 for alternative thermal sensitivity and operating/storage temperature