PCE Instruments

Contact Thermometer

Order no.: PCE-HPT 1
The contact thermometer is a highly accurate 1-channel temperature measuring device. The contact thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

- Measuring range: -100 ... +400 °C / -148 ... 752 °F
- Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 ... 82.4 °F) device only
- Resolution: 0.01 °C / 0.018 °F
- PT-100 sensor
£ 378.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-ST 1

The PCE-ST 1 Contact Thermometer is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The contact thermometer is very easy to use, with small dimensions and short response time.


- Measuring range:  -40 ... 250°C / -40 ... 482°F
- Indication of max. and min. values
- Data function
- Lock for continuous operation
- Measured value in ºC or ºF

£ 26.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IR 80
The contact thermometer PCE-IR 80 is used for quick control of the temperature of food. The contact thermometer is used in the area of ​​canteen kitchens, catering services, refrigerated warehouses and non-refrigerated warehouses. The contact thermometer has two types of measurement. On the one hand, the contact thermometer can measure the temperature of the object without contact via infrared. 

- Infrared measuring range: -35 ... 330°C / -31 ... 626°F
- Type of measurement puncture sensor measuring range: -20 ... 260°C / -4 ... 500°F
- Measurement spot ratio: 4: 1
- For frozen, cold and hot foods
£ 44.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-T312N
The PCE-T312N contact thermometer is a two-channel measuring instrument. The contact thermometer offers a wide range of measurement options. 

- K-type thermometer with dual input
- Temperature range: -210 ... 1372°C / -346 ... 2501°F
- Direct measurement / differential measurement (T1-T2)
- Electronic zero offset
- Readings in °C, °F or Kelvin (K)
£ 81.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IR 90
The contact / non-contact food thermometer is used to check the temperature of food. In addition to the surface temperature via the infrared sensor, the contact / non-contact food thermometer can also be used to determine the core temperature via the fold-out resistance temperature sensor.

- Infrared measuring range: -40 ... 300°C / -40 ... 572°F
- Sensor measuring range: -40 ... 300°C / -40 ... 572°F
- Charging station with micro USB cable
- Bluetooth interface
£ 84.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-T 318

PCE-T 318 is a digital contact thermometer used to measure temperature in laboratory, industrial and heating, ventilation, air conditioning and refrigeration (HVACR) systems and applications. Compatible with IEC751 PT100, PT500 and PT1000 sensors, this platinum resistance temperature detector (RTD) thermometer includes 1 x 4-wire PT100 class A sensor in the delivery contents. Additional sensors sold separately.

 

- Measuring range: -100 ... 300°C / -148 ... 572°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ± (0.1% of reading + 0.4°C / 0.72°F)

£ 84.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-T312N-ICA
This contact thermometer is a two-channel measuring instrument. The contact thermometer offers a wide range of measurement options.

- K-type thermometer with dual input
- Temperature range: -210 ... 1372 °C / -346 ... 2501 °F
- Direct measurement / differential measurement (T1-T2)
- Electronic zero offset
- Readings in °C, °F or Kelvin (K)
- incl. ISO Calibration Certificate
£ 133.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IR 80-ICA
The contact thermometer PCE-IR 80-ICA incl. ISO calibration certificate is used for quick control of the temperature of food. The contact thermometer is used in the area of ​​canteen kitchens, catering services, refrigerated warehouses and non-refrigerated warehouses. The contact thermometer has two types of measurement. On the one hand, the contact thermometer can measure the temperature of the object without contact via infrared. 

- Infrared measuring range: -35 ... 330°C / -31 ... 626°F
- Type of measurement puncture sensor measuring range: -20 ... 260°C / -4 ... 500°F
- Measurement spot ratio: 4: 1
- For frozen, cold and hot foods
- Incl. ISO calibration certificate
£ 137.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IR 100-ICA

PCE-IR 100-ICA incl. ISO calibration certificate is both an infrared non-contact thermometer for measuring surface temperature and a contact thermometer with probe for measuring core temperature of food. This food-grade thermometer allows for quick and easy testing of food surface temperatures without contamination using the infrared sensor, while also offering the possibility of testing food internal temperatures using the food-quality sensor probe.


- Infrared temperature range: -33 ... 220ºC / -27 ... 428ºF
- Probe temperature range: -55 ... 330ºC / -67 ... 626ºF
- Resolution: 0.2ºC / 0.36ºF
- IP 65 ingress protection rating allows hygienic cleaning

£ 173.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IR 90-ICA
The contact / non-contact food thermometer is used to check the temperature of food. In addition to the surface temperature via the infrared sensor, the contact / non-contact food thermometer can also be used to determine the core temperature via the fold-out resistance temperature sensor.

- Infrared measuring range: -40 ... 300°C / -40 ... 572°F
- Sensor measuring range: -40 ... 300°C / -40 ... 572°F
- Charging station with micro USB cable
- Bluetooth interface
incl. ISO-Calibration Certificate
£ 183.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-T 330
The Contact Thermometer has two measuring inputs. Each measuring input from the Contact Thermometer can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the Contact Thermometer shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points
£ 195.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-T390

The PCE-T390 Contact Thermometer is a digital device with four input channels for type K and type J temperature sensors and two input channels for PT100 temperature sensors. The PCE-T390 Contact Thermometer has a SD card slot (from 1 to 16 GB) for storing the measured data. The data is stored in xls format on the SD card of the contact thermometer so that no additional software is needed for further analysis.


- 4 input channels for type-K, J temperature sensors
- 2 input channels for Pt100 temperature sensors
2 x type-K TF-500 temperature sensors are included in the package
- SD card memory (1 ... 16 GB)

 

£ 230.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-T 330-ICA
The Contact Thermometer has two measuring inputs. Each measuring input from the Contact Thermometer can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the Contact Thermometer shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points
- incl. ISO Calibration Certificate
£ 246.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-T 420
The 4-channel contact thermometer allows for the display and archiving of multiple temperature sensors simultaneously. It can be connected to up to 8 different types of thermocouples.

- Measurement range from -200 ... +1800 °C
- High resolution of 0.1 °C
- Connectable with 8 types of thermocouples
- Thermocouple types: K, J, S, R, E, T, N, B
- Storage for 10 million measurement values
- Data interface: USB-C
- Equipped with 4 channels
£ 343.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-T 420-ICA
The 4-channel contact thermometer allows for the display and archiving of multiple temperature sensors simultaneously. It can be connected to up to 8 different types of thermocouples.

- Measurement range from -200 ... +1800 °C
- High resolution of 0.1 °C
- Connectable with 8 types of thermocouples
- Thermocouple types: K, J, S, R, E, T, N, B
- Storage for 10 million measurement values
- Data interface: USB-C
- Equipped with 4 channels
- incl. ISO-Calibration Certificate
£ 396.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-T390-ICA
The contact thermometer is a digital device with four input channels for type K and type J temperature sensors and two input channels for PT100 temperature sensors. The contact thermometer has a SD card slot (from 1 to 16 GB) for storing the measured data.

- 4 input channels for type-K, J temperature sensors
- 2 input channels for Pt100 temperature sensors
- 2 x type-K TF-500 temperature sensors are included in the package
- Sampling rate: 1/ sec.
- SD card memory (1 ... 16 GB)
- Incl. ISO calibration certificate
£ 281.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HMM 25

The hay contact thermometer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay contact thermometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay contact thermometer proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 25 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

£ 444.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HMM 50

The hay contact thermometer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay contact thermometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay contact thermometer proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 50 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

£ 444.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HPT 1-ICA
The contact thermometer with microprocessor is a high precision 1-channel temperature gauge. The contact thermometer with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.

- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2% r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values
- Incl. ISO calibration certificate
£ 472.00

Price excl. VAT &. delivery
2 year Warranty