PCE Instruments

Water Analysis Meter

Order no.: PCE-228HTE

The Water Analysis Meter PCE-228HTE is a mobile device for measuring pH, mV, °C and °F, complete with SD card memory and an RS-232 interface. This particular model includes a special pH electrode suitable for temperatures up to 100°C / 212 °F.


- Measurement range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ±(0.02 pH + 2 digits)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232
- Incl. special pH electrode: for temperatures to 100°C / 212°F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228HTE-ICA

The Water Analysis Meter PCE-228HTE is a mobile device for measuring pH, mV, °C and °F, complete with SD card memory and an RS-232 interface. This particular model includes a special pH electrode suitable for temperatures up to 100°C / 212°F.


- Measurement range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2 digits)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232
- Incl. special pH electrode: for temperatures to 100°C / 212°F
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: ABBE-REF 1

ABBE-REF 1 is a high-precision Abbe refractometer for the accurate measurement of refractive indexes (nD), sucrose or sugar contents (% Brix) and mean dispersion values (nF-nC) of transparent and translucent liquids and substances. This bench-top Abbe refractometer can be used to determine refractive indexes in a temperature range from 0 ... +70 ºC (temperature control included).


- Measurement ranges: 1.300 ... 1.700 nD / 0.0 ... 95 % Brix
- Scale division: 0.0005 nD / 0.25 % Brix
- Resolution and accuracy: 0.0002 nD / 0.1 % Brix

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 15
The school water analysis meter PCE-PH 15 is a measuring instrument for the determination of the pH value in liquids. Thanks to its ease of use, the PCE-PH 15 water analysis meter is ideal for use in, for example, schools or educational institutions.
 
- Measuring range: 0.00 ... 14.00 pH
- Measurement accuracy: ± 0.1 pH (to 20 °C), ± 0.2 pH
- Resolution: 0.01 pH
- Ideal for school facilities
- Small and handy
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PHM 12
The aquarium water analysis meter PCE-PHM 12 has been specially developed for the pH measurement in aquariums. The aquarium water analysis meter can be attached to any aquarium with the included universal holder. The built-in temperature probe on the aquarium water analysis meter is not only used for temperature indication but also for temperature compensation.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.1 pH
- Temperature compensation up to 50°C / 122°F
- Universal mounting bracket
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MT 50

The PCE-MT 50 contact mini-thermometer is a compact and water resistant device to be used with diverse type K sensors. The PCE-MT 50 contact mini-thermometer can be used in many different fields such as: HVAC measurements (Heating Ventilation Air Conditioning), air conditioning, heating and process measurements.


- Measurement range: -60 ... 1370°C / -76 ... 2498°F
- Accuracy (±1 digit): ± 1.0°C / 1.8°F or ± 1% (the highest value)
- Battery life: approx. 200 hours
- Probe: type K

 

Manufacturer: TFA Dostmann GmbH
Test Instruments manufacturer
Order no.: PCE-PH 16
The water analysis meter PCE-PH 16 is a very easy-to-use measuring device for determining the pH value in a wide variety of liquids. Using the BNC connection of the water analysis meter PCE-PH 16, a wide variety of pH electrodes can also be connected to the water analysis meter PCE-PH 16.

- Measuring range: 0.00 ... 14.00 pH
- Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
- Resolution: 0.01 pH
- Ideal for school facilities
- Exchangeable electrode through BNC connection
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 17
The water analysis meter PCE-PH 17 is a water analysis meter with a pH electrode made entirely of glass. The fact that the electrode of the water analysis meter is made of glass makes cleaning the electrode easier and more thorough. 

- Measuring range: 0.00 ... 14.00 pH
- Accuracy: ± 0.1 pH (at 20°C / 28°F), ± 0.2 pH
- Resolution: 0.01 pH
- Ideal for school facilities
- Exchangeable electrode through BNC connection
- Exchangeable glass electrode
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 18
The water analysis meter PCE-PH 18 is a water analysis meter with a pointed glass electrode. Thanks to this glass electrode, the water analysis meter PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

- Measuring range: 0.00 ... 14.00 pH
- Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
- Resolution: 0.01 pH
- Puncture electrode (soft bottoms)
- Exchangeable electrode through BNC connection
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 22

The waterproof water analysis meter is used for fast and accurate measurement of pH and temperature. Due to the practical double display, both values can be read simultaneously on the water analysis meter. The waterproof and robust housing (IP 67) means the water analysis meter can be used under difficult conditions.

- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH20
The water analysis meter PCE-PH20 is a user-friendly hand-held pH device that allows fast and reliable pH measurement. This water analysis meter is very suitable for use in the area of aquaristics or aquarium care. The water analysis meter PCE-PH20 has a three-point calibration, which is carried out automatically.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media or water based solutions
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PWT 10

The water analysis meter PCE-PWT 10 is a good solution for anyone who wants to check the conductivity of ultrapure water and to accurately determine the salinity of liquids. 

- conductivity: 0 ... 20 µS/cm ...
- salinity: 0,00 ... 10.00 ppt
- temperature: 0 ... 60 °C / 32 ... 140 °F
- automatic temperature compensation
- internal 3-point calibration

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 41

With the Water Analysis Meter PCE-CM 41, it is possible to measure conductivity value, the amount of all the solid material or dissolved salts  (TDS - Total Dissolved Solids) and the temperature. The Conductivity Tester is very easy to carry everywhere thanks to its small size.


- EC conductivity: 0...2000 µS/cm  /  0...20 mS/cm
- Salt content TDS: 0...2000 mg/l (ppm)  /  20000 mg/l (ppm)
- Temperature: 0.0 ... 60 °C / 32 ... 140 °F
- Water resistant (IP 67)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PHM 14
The Water Analysis Meter PCE-PHM 14 has been developed for permanent and easy pH monitoring. This water analysis meter can be easily mounted on a wall. Various pH electrodes can be connected via the BNC connector on the bottom of the PCE-PHM 14 water analysis meter. 

- measuring range: 0 ... 14 pH
- resolution: 0.01 pH
- compact device for wall mounting
- internal calibration function
- ideal for continuous monitoring
- includes pH electrode PE-03

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 30
The water analysis meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable water analysis meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 22-ICA
The water analysis meter is used for fast and accurate detection of pH and temperature. Due to the practical double display, both values ​​can be read simultaneously on the water analysis meter.


- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SM 11

The water analysis meter PCE-SM 11 measures conductivity in non-saturated solutions quickly and accurately. The Conductivity Meter PCE-SM 11 has a high measuring accuracy thanks to the automatic temperature compensation.


- Measurement range:  0.0 ... 12.0 % (weight percentage)
- Accuracy: ± 0.5 %
- Resolution: 0.01 %
- Temperature compensation: automatic from 0 to +50 °C / 32 ... 122 °F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH20S-ICA

The water analysis meter is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The water analysis pH meter can be recalibrated by using the calibration solutions that are supplied with the device.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- pH electrode for piercing into Soil
- Incl. ISO calibration certificate


**Care must be taken when inserting probe to not break it**
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH20-ICA
The water analysis meter was developed to directly determine the pH in aqueous media or water based solutions. Depending on the purpose of creating an aquarium, whether commercial, scientific (experimental and laboratory tests) or decorative, the most desirable pH level should be maintained to provide correct living conditions for the fish and other organisms.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 318

PCE-T 318 is a digital contact thermometer used to measure temperature in laboratory, industrial and heating, ventilation, air conditioning and refrigeration (HVACR) systems and applications. Compatible with IEC751 PT100, PT500 and PT1000 sensors, this platinum resistance temperature detector (RTD) thermometer includes 1 x 4-wire PT100 class A sensor in the delivery contents. Additional sensors sold separately.

- Measuring range: -100 ... 300°C / -148 ... 572°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ± (0.1% of reading + 0.4°C / 0.72°F)

Manufacturer: PCE Instruments
Test Instruments manufacturer