Test Meters

The condition monitoring sound level meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The condition monitoring sound level meter has a logger function, which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The data logger with USB interface is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The data logger with USB interface has a logger function which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The data logging sound level meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The sound level meter has a logger function which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The decibel meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The decibel meter has a logger function, which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The environmental meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The environmental meter has a logger function, which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The environmental tester is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The environmental tester has a logger function, which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The noise meter / sound meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The noise meter / sound meter has a logger function, which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The SPL meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The SPL meter has a logger function, which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

PCE-HVAC 2 is a high-velocity multifunction HVAC meter with a pitot tube. This portable HVAC meter can be used to determine air speed, air pressure, air flow, differential pressure and ambient temperature. The pitot tube allows access through tiny openings to take measurements in small pipe systems and other confined spaces.-

- Measures air velocities up to 80 m/s / 262 ft/s, 2.24 ... 178.66 MPH  
- Zero, minimum, maximum, average, record and hold functions
- Stores to memory up to 99 measurement values per parameter

- Measuring range: 0 ... 1250 μm / 0 ...  49.2 mils 
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate

- Measuring range: 0 ... 1250 μm / 0 ...  49.2 mils 
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate

- Measuring range: 0 ... 1250 μm / 0 ...  49.2 mils 
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate

- Measuring range: 0 ... 1250 μm / 0 ...  49.2 mils 
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate

- Measuring range: 0 ... 1250 μm / 0 ...  49.2 mils 
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate

- Measuring range: 0 ... 1250 μm / 0 ...  49.2 mils 
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate

The force gage has a measuring range of 0 … 1000 kg and a resolution of 0.1 kg. With an accuracy of 1% of the measuring range, the force gage is also a precise measuring device. This is why the force gage is used, for example, when weighing raw materials.

- Measuring range: 0 ... 1000 kg / 2204 lb
- Adjustable units: kg, lb, N
- "Hold", "Tare" and "MAX" functions
- Incl. ISO calibration certificate

PCE-VE 200 is an industrial inspection camera, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.

- 4.5 mm / 0.18 in diameter, semi-rigid
- 1 m / 3.28 ft cable length
- 180° image rotation