Measuring Instruments

PCE-DRS 2 is a handheld digital sodium chloride (NaCl) and chlorine (Cl) refractometer used to determine the salinity or salt content (‰), chlorine content (‰), specific gravity (SG) and refractive index (nD) of liquid. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Salt content, chlorine content, refractive index,
  specific gravity, temperature
- Measurement range: 0 ... 100 ‰ salinity / 0 ... 57 ‰ chlorine 
- Resolution: 1 ‰ / 0.001 SG 
- Accuracy: ±2 ‰ / ±0.002 SG 
- Automatic temperature compensation (ATC)

PCE-DRH 1 is a handheld digital refractometer used to determine the sugar content / water content / degrees Baumé (Bé°) / refractive index of honey in the 0 ... 90 % Brix / 5 ... 38% water / 33 ... 48 Bé° / 1.3330 ... 1.5177 nD measuring range. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Brix, water content, degrees Baumé (Bé°), refractive index, temperature
- Measurement range: 0 ... 90 % Brix 
- Resolution: 0.1 % Brix
- Accuracy: ±0.2 % Brix
- Automatic temperature compensation (ATC) 

PCE-DRW 2 is a handheld digital refractometer used to determine the sugar content / alcohol content (% vol ap) / °Oechsle (°Oe) / KMN (babo) of wine and similar liquids in the 0 ... 45 % Brix / 0 ... 22% vol ap / 3 ... 150 °Oe / 0 ... 25 KMW measuring range. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Brix, % vol ap, °Oechsle, KMW, temperature
- Measurement range: 0 ... 45 % Brix 
- Resolution: 0.1 % Brix
- Accuracy: ±0.2 % Brix 
- Automatic temperature compensation (ATC)

The psychrometer or diagnostic measuring device is used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the psychrometer calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the psychrometer.

- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F
- Incl. ISO calibration certificate

PCE-DRB 1 is a handheld digital brix refractometer used to determine the sugar content / refractive index of liquid in the 0 ... 90 % Brix / 1.3330 ... 1.5177 nD measuring range. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

- Brix, refractive index, temperature
- Measurement range: 0 ... 90 % Brix 
- Resolution: 0.1 % Brix
- Accuracy: ±0.2 % Brix
- Automatic temperature compensation (ATC)

The multi-parameter IoT meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter IoT meter.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Cyanuric acid
- Bromine
- Iron
- Iodine

The multi-parameter IoT sensor is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter IoT sensor. With this multi-parameter IoT sensor it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Bluetooth connection with app
- Adjustable units: mg/l, ppm
- Light detector: photodiode
Parameters:
- pH
- Alkalinity
- Calcium hardness
- Total hardness

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH meter. With this multi-parameter pH meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Bluetooth connection with app
- Adjustable units: mg/l, ppm
- Light detector: photodiode
Parameters:
- pH
- Alkalinity
- Calcium hardness
- Total hardness

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH meter. With this multi-parameter pH meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Adjustable units: mg/l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Total hardness
- Iron

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH meter.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Cyanuric acid
- Bromine
- Iron
- Iodine

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH meter.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- pH
- Urea
- Nitrite
- Nitrate
- Phosphate
- Ammonia
- Iron
- Copper
- Potassium

The multi-parameter photometer is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter photometer. With this multi-parameter photometer it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Bluetooth connection with app
- Adjustable units: mg/l, ppm
- Light detector: photodiode
Parameters:
- pH
- Alkalinity
- Calcium hardness
- Total hardness

The multi-parameter photometer is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter photometer. With this multi-parameter photometer it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Adjustable units: mg/l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Total hardness
- Iron

The multi-parameter photometer is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter photometer.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Cyanuric acid
- Bromine
- Iron
- Iodine

The multi-parameter photometer is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter photometer.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- pH
- Urea
- Nitrite
- Nitrate
- Phosphate
- Ammonia
- Iron
- Copper
- Potassium

The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter. With this multi-parameter water analysis meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Bluetooth connection with app
- Adjustable units: mg/l, ppm
- Light detector: photodiode
Parameters:
- pH
- Alkalinity
- Calcium hardness
- Total hardness

The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter. With this multi-parameter water analysis meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Adjustable units: mg/l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Total hardness
- Iron

The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Cyanuric acid
- Bromine
- Iron
- Iodine