Industrial Measurement Products and Solutions

Test Meters

Order no.: PKT-2530

This Phase Rotation Meter PKT-2530 has a robust housing with a large LCD display so you can easily and conveniently determine the phase and motor rotation direction. Furthermore, any problems in individual phases are displayed on the rotating field tester. The rotating field tester meets the safety standard CAT III 600 V, IEC-61010.


- No batteries required
- Robust alligator clips for easy connection
- 3-phase measurements of 40 ... 690 V AC
- Safety standard: IEC-61010, CAT III 600 V
- Protection class IP-40

 

Manufacturer: Peaktech Prüf- und Meßtechnik GmbH
Test Instruments manufacturer
Order no.: DISTO D110

The distance measuring device Leica Disto D110 is a handy and ergonomic measuring device for the measurement of length and surface measurements. With the Disto D110 distance measuring device, distances of up to 60 m can be determined. The measuring unit can be set to meters, feet or inches with the distance measuring device.


- Measuring range: 0.2 ... 60 m
- Accuracy: ± 1.5 mm
- Bluetooth interface
- Free app for smartphones / tablets

 

Manufacturer: Gottlieb Nestle GmbH
Test Instruments manufacturer
Order no.: DISTO D110

The laser distance measuring device Leica Disto D110 is a handy and ergonomic measuring device for the measurement of length and surface measurements. With the Disto D110 laser distance measuring device, distances of up to 60 m can be determined. The measuring unit can be set to meters, feet or inches with the laser distance measuring device.


- Measuring range: 0.2 ... 60 m
- Accuracy: ± 1.5 mm
- Bluetooth interface
- Free app for smartphones / tablets

 

Manufacturer: Gottlieb Nestle GmbH
Test Instruments manufacturer
Order no.: Disto D210

Distance measuring device Leica Disto D210.


- Measuring range of up to 80 m
- Measuring accuracy: ± 1 mm
- Illuminated 3-line display

 

Manufacturer: Gottlieb Nestle GmbH
Test Instruments manufacturer
Order no.: Disto D210

Laser distance measuring device Leica Disto D210.


- Measuring range of up to 80 m
- Measuring accuracy: ± 1 mm
- Illuminated 3-line display

 

Manufacturer: Gottlieb Nestle GmbH
Test Instruments manufacturer
Order no.: 4654

The Oxygen Meter GAZTOX is a multi-gas monitor that protects people residing in environments that are prone to gas formation. Thus, the Oxygen Meter is a special helper to those in daily contact with gases.


- TOX measurement with alarms in accordance with Technical Rule 402
- Small size
- Backlit display
- Plug-in sensors
- Ex-protection for mining and industry
- Optical, acoustic and vibration alarm

 

Manufacturer: Gazomat
Test Instruments manufacturer
Order no.: PCE-P43

The power analyzer PCE-P43 is designed to take measurements and transfer measurement data of 3-phase power networks. The power analyzer can be connected to symmetrical and asymmetrical systems.


- Easy mounting on DIN rail
- Pulse output, alarm relay
- Current or voltage output
- Direct and indirect measurement

 

Test Instruments manufacturer
Order no.: PCE-P43

The 3-Phase-Power Meter PCE-P43 is designed to take measurements and transfer measurement data of 3-phase power networks. The 3-Phase-Power Meter can be connected to symmetrical and asymmetrical systems.


- Easy mounting on DIN rail
- Pulse output, alarm relay
- Current or voltage output
- Direct and indirect measurement

 

Test Instruments manufacturer
Order no.: AQ-FM S900

The gas detector / base AQ-FM S900 is used to measure and control gas concentrations, and can communicate with a variety of hardware systems. The transmitter can also be used as switching relays with user-set values, as 4- 20 mA gas transmitter and it can communicate with a network via the RS485 interface. Changing sensor heads is quick and easy, no configuration changes required. Calibration certificate included. Wall mounting kit.


- Analog Output: 4-20 mA (optional isolated), 10-30 V
- External control signal: Min Max. Alarm, control and diagnostics
- Power supply: 12 VDC 1A power supply is required but not supplied
- Interface: RS485


ATTENTION! no AQ sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: AeroQual Limited
Test Instruments manufacturer
Order no.: AQ-FM S900

The ozone meter / base unit AQ-FM S900 is used to measure and control gas concentrations, and can communicate with a variety of hardware systems. The transmitter can also be used as switching relays with user-set values, as 4- 20 mA output gas transmitter and it can communicate with a network via the RS485 interface. Changing sensor heads is quick and easy, no configuration changes required. Calibration certificate included.


- Analog Output: 4-20 mA (optional isolated), 10-30V
- External control signal: Min Max. Alarm, control and diagnostics
- Power supply: 12 VDC 1A supply is not supplied but required
- Interface: RS485

ATTENTION! no AQ sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: AeroQual Limited
Test Instruments manufacturer
Order no.: PCE-DMM 50

The manometer PCE-DMM 50 is suitable for stationary and mobile pressure measurement. The manometer PCE-DMM 50 is used in mechanical and plant engineering, laboratory technology and environmental technology. This manometer is battery powered. The measuring range of the manometer reaches up to 600 bar.


- Max. 600 bar / 8702 psi
- Rotating display
- For hygienic applications
- Media: water, oxygen, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: Ceramics
- Accuracy class: 0.2

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMM 51

The manometer PCE-DMM 51 is suitable for flush mounting hygiene. Thus, the manometer can be installed both in the food industry as well as in medical technology. The manometer shows on its rotatable display pressures up to 400 bar, relative or absolute. The operating fluid of the manometer has a food safe FDA approval.


- Max. 400 bar / 5801 psi
- Rotating display
- For hygienic applications
- Media: water, paints and coatings, gases, viscous and paste media
- Pressure: relative
- Diaphragm: stainless steel flush
- Accuracy class: 0.2

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMM 50

The pressure gauge PCE-DMM 50 is suitable for stationary and mobile pressure measurement. The pressure gauge PCE-DMM 50 is used in mechanical and plant engineering, laboratory technology and environmental technology. This pressure gauge is battery powered. The measuring range of the pressure gauge reaches up to 600 bar.


- Max. 600 bar
/ 8702 psi
- Rotating display
- For hygienic applications
- Media: water, oxygen, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: Ceramics
- Accuracy class: 0.2

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMM 51

The pressure gauge PCE-DMM 51 is suitable for flush mounting hygiene. Thus, the gauge can be installed both in the food industry as well as in medical technology. The pressure gauge shows on its rotatable display pressures up to 400 bar, relative or absolute. The operating fluid of the pressure gauge has a food safe FDA approval.


- Max. 400 bar / 5801 psi
- Rotating display
- For hygienic applications
- Media: water, paints and coatings, gases, viscous and paste media
- Pressure: relative
- Diaphragm: stainless steel flush
- Accuracy class: 0.2

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Disto X310

The Disto X310 distance measuring device is extremely robust and protects the sensitive measuring elements with solid rubber components. The distance measuring device is thus protected against spray water and dustproof according to IP 65. Cleaning under water is no problem. With the 360 ° tilt sensor and the combination of distance and tilt measurement, you can determine the horizontal distance precisely and easily, even across obstacles.


- Measuring range up to 120 meters
- 360° Tilt sensor
- Smart Horizontal Mode
- Protection class IP 65

 

Manufacturer: Gottlieb Nestle GmbH
Test Instruments manufacturer
Order no.: Disto X310

The Disto X310 laser distance measuring device is extremely robust and protects the sensitive measuring elements with solid rubber components. The laser distance measuring device is thus protected against spray water and dustproof according to IP 65. Cleaning under water is no problem. With the 360 ° tilt sensor and the combination of distance and tilt measurement, you can determine the horizontal distance precisely and easily, even across obstacles.


- Measuring range up to 120 meters
- 360° Tilt sensor
- Smart Horizontal Mode
- Protection class IP 65

 

Manufacturer: Gottlieb Nestle GmbH
Test Instruments manufacturer
Order no.: PCE-T 260
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the automotive tester also has the option of removing the rotational contacts and measuring temperatures.

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
Manufacturer: PCE Instruments
Order no.: PCE-T 260
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the handheld tachometer also has the option of removing the rotational contacts and measuring temperatures.

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
Manufacturer: PCE Instruments
Order no.: PCE-T 260
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the tachometer-stroboscope also has the option of removing the rotational contacts and measuring temperatures.

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
Manufacturer: PCE Instruments
Order no.: PCE-T 260
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the tachometer-stroboscope also has the option of removing the rotational contacts and measuring temperatures.

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
Manufacturer: PCE Instruments