Measuring Instruments

Explore PCE Instruments’ wide selection of monitoring, analysis, testing and measuring instruments used to measure various parameters in the physical, electrical and chemical spectra. Choose from more than 800 different kinds of desktop and handheld measuring and test equipment in stock and ready to ship to your location. No matter the task, you’re sure to find the right tool for your application with PCE Instruments.
Thermometer PCE-HWA 30
£ 242.00
Price excl. VAT &. delivery
2 year Warranty

The thermometer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the thermometer can measure the volume flow and the ambient temperature.

  • Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
  • Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
  • Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
  • Data memory for 960 measured values
  • Wind speed
  • Volume flow
  • Temperature measurement

Wind Measurer PCE-HWA 30
£ 242.00
Price excl. VAT &. delivery
2 year Warranty

The wind measurer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the wind measurer can measure the volume flow and the ambient temperature.

  • Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
  • Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
  • Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
  • Data memory for 960 measured values
  • Wind speed
  • Volume flow
  • Temperature measurement

Wind Speed Meter PCE-HWA 30
£ 242.00
Price excl. VAT &. delivery
2 year Warranty

The wind speed meter measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the wind speed meter can measure the volume flow and the ambient temperature.

  • Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
  • Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
  • Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
  • Data memory for 960 measured values
  • Wind speed
  • Volume flow
  • Temperature measurement

Dissolved Oxygen Meter PCE-DOM 10
£ 247.00
Price excl. VAT &. delivery
2 year Warranty
The Dissolved Oxygen Meter is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analysis can be carried out on the oxygen content in a very short time and with an integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

  • Measuring range up to 20 mg / L
  • For oxygen analysis
  • Temperature compensation up to 50°C / 122°F
  • For measurement in liquids and in air
  • Exchangeable oxygen sensor
IoT Meter PCE-CP 10
£ 289.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The multi-parameter IoT meter PCE-CP 10 is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter IoT meter. With this multi-parameter IoT meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

  • Bluetooth connection with app
  • 503 nm / 570 nm / 620 nm LED
  • Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)Parameters:
  • Alkalinity
  • Chlorine free
  • Chlorine total
  • Cyanuric acid
  • pH
Photometer PCE-CP 10
£ 289.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The multi-parameter photometer PCE-CP 10 is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter photometer. With this multi-parameter photometer it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

  • Bluetooth connection with app
  • 503 nm / 570 nm / 620 nm LED
  • Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)Parameters:
  • Alkalinity
  • Chlorine free
  • Chlorine total
  • Cyanuric acid
  • pH
PAT Tester / Portable Appliance Testing Equipment PCE-EVSE 310
£ 291.00
Price excl. VAT &. delivery
2 year Warranty
Topseller
The PAT tester / portable appliance testing equipment is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

  • PE pre-test
  • Proximity Pilot PP / Control Pilot CP
  • Simulation CP fault "E" / PE fault
  • Mains socket for measuring purposes
  • Safety measuring sockets
  • Optional adapter to type 1
PAT Tester / Portable Appliance Testing Equipment PCE-EVSE 310+
£ 291.00
Price excl. VAT &. delivery
2 year Warranty
Topseller
The PAT tester / portable appliance testing equipment is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

  • PE pre-test
  • Proximity-Pilot PP / Control-Pilot CP
  • Simulation CP error "E" / PE error
  • Mains socket for measuring purposes
  • Safety measuring sockets
  • incl. type 2 plug and adapter to type 1
IoT Meter PCE-SM61
£ 292.00
Price excl. VAT &. delivery
2 year Warranty
The IoT meter allows you to quickly and easily query your process data via the Internet. Any device with RS485 interface can be connected to IoT meter. The data is retrieved via a web browser and can be carried out simultaneously by the PC, smartphone, tablet, etc., and by several users. In addition to the data query, the data logger can trigger alarms. The configuration can be done via USB or Ethernet interface.

  • up to 100 devices with 25 registers can be connected
  • Configuration via webbrowser
  • Interface: RS485, Ethernet
  • Memory: 1 GB Flash
  • additional inputs / outputs: digital input or relay output (selectable)

Thickness Gauge PCE-TG 150A
£ 468.00
Price excl. VAT &. delivery
2 year Warranty
The thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness gauge.

  • Measuring range: 1.00 … 300.0 mm  / 0.04 … 11.81"
  • Resolution: 0.01 mm at ≤99.99 mm                       0.1 mm at ≥100.0 mm
  • Accuracy: ±0.5% of measured value + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
    The thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the thickness gauge.
  • Measuring range: 1.00 … 300.0 mm
  • Resolution: 0.01 mm at ≤99.99 mm
  • Accuracy: ±0.5 % of Mw. + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
Digital Thermometer PCE-JR 911-ICA incl. ISO Calibration Certificate
£ 470.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

With the digital thermometer you get a measuring device with which you can perform a wide range of measuring tasks. On the one hand, you can directly measure and read the temperature of bodies without contact, on the other hand you can also save the measured values internally in the data logger and transfer them to a PC or laptop via the RS-232 interface.

  • Range: -40 … +500 °C / -40 … 932 °F
  • Resolution: 0.1 °C / 0.18 °F
  • Accuracy: ±2%
  • Memory: 4 x 99 values
  • E-factor: 0.3 … 1.0 (adjustable)
  • incl. software and RS-232 cable
  • incl. ISO calibration certificate

Infrared Thermometer PCE-JR 911-ICA incl. ISO Calibration Certificate
£ 470.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

With the infrared thermometer you get a measuring device with which you can perform a wide range of measuring tasks. On the one hand, you can directly measure and read the temperature of bodies without contact, on the other hand you can also save the measured values internally in the data logger and transfer them to a PC or laptop via the RS-232 interface.

  • Range: -40 … +500 °C / -40 … 932 °F
  • Resolution: 0.1 °C / 0.18 °F
  • Accuracy: ±2%
  • Memory: 4 x 99 values
  • E-factor: 0.3 … 1.0 (adjustable)
  • incl. software and RS-232 cable
  • incl. ISO calibration certificate

Non-Contact Thermometer PCE-JR 911-ICA incl. ISO Calibration Certificate
£ 470.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

With the non-contact thermometer you get a measuring device with which you can perform a wide range of measuring tasks. On the one hand, you can directly measure and read the temperature of bodies without contact, on the other hand you can also save the measured values internally in the data logger and transfer them to a PC or laptop via the RS-232 interface.

  • Range: -40 … +500 °C / -40 … 932 °F
  • Resolution: 0.1 °C / 0.18 °F
  • Accuracy: ±2%
  • Memory: 4 x 99 values
  • E-factor: 0.3 … 1.0 (adjustable)
  • incl. software and RS-232 cable
  • incl. ISO calibration certificate

Environmental Meter PCE-PH 228
£ 489.00
Price excl. VAT &. delivery
2 year Warranty
The advanced environmental meter represents precision, user-friendliness, and GLP compliance. With a high-resolution LCD display, the environmental meter provides a clear and concise presentation of measurement values. GLP compliance is ensured through automatic data recording and traceable documentation. It allows measurement of pH or redox value and temperature with external sensors. 

  • Measurement Range -2 … +20 pH (Device)
  • Measurement Range 1 … 13 pH (Electrode)
  • High Accuracy ± 0.002 pH + 2 Digits
  • GLP Data Management
  • Easy 2, 3, 4, and 5-Point Calibration
  • Graphical Display of Measurement History 
  • Data Logger
Environmental Tester PCE-PH 228
£ 489.00
Price excl. VAT &. delivery
2 year Warranty
The advanced environmental tester represents precision, user-friendliness, and GLP compliance. With a high-resolution LCD display, the environmental tester provides a clear and concise presentation of measurement values. GLP compliance is ensured through automatic data recording and traceable documentation. It allows measurement of pH or redox value and temperature with external sensors. 

  • Measurement Range -2 … +20 pH (Device)
  • Measurement Range 1 … 13 pH (Electrode)
  • High Accuracy ± 0.002 pH + 2 Digits
  • GLP Data Management
  • Easy 2, 3, 4, and 5-Point Calibration
  • Graphical Display of Measurement History 
  • Data Logger
pH Meter PCE-PH 228
£ 489.00
Price excl. VAT &. delivery
2 year Warranty
The advanced pH meter represents precision, user-friendliness, and GLP compliance. With a high-resolution LCD display, the pH meter provides a clear and concise presentation of measurement values. GLP compliance is ensured through automatic data recording and traceable documentation. It allows measurement of pH or redox value and temperature with external sensors. 

  • Measurement Range -2 … +20 pH (Device)
  • Measurement Range 1 … 13 pH (Electrode)
  • High Accuracy ± 0.002 pH + 2 Digits
  • GLP Data Management
  • Easy 2, 3, 4, and 5-Point Calibration
  • Graphical Display of Measurement History 
  • Data Logger
Water Analysis Meter PCE-PH 228
£ 489.00
Price excl. VAT &. delivery
2 year Warranty
The advanced water analysis meter represents precision, user-friendliness, and GLP compliance. With a high-resolution LCD display, the water analysis meter provides a clear and concise presentation of measurement values. GLP compliance is ensured through automatic data recording and traceable documentation. It allows measurement of pH or redox value and temperature with external sensors. 

  • Measurement Range -2 … +20 pH (Device)
  • Measurement Range 1 … 13 pH (Electrode)
  • High Accuracy ± 0.002 pH + 2 Digits
  • GLP Data Management
  • Easy 2, 3, 4, and 5-Point Calibration
  • Graphical Display of Measurement History 
  • Data Logger
Wood Moisture Meter PCE-WP24
£ 641.00
Price excl. VAT &. delivery
2 year Warranty

PCE-WP24 is a wood moisture meter used to perform noninvasive, nondestructive moisture measurements of wood, timber and other construction or building materials. An ideal tool for assessing everything from lumber to floors and more, this moisture meter uses electromagnetic waves that penetrate approximately 50 mm / 1.96 inches to 60 mm / 2.36 inches deep (depending on substrate) to return a mean-value moisture content percentage.


  • Moisture content measuring range: 4% … 60% wood, 0% … 10% building  materials
  • Resolution: 0.1%
  • Accuracy: ±0.7%