Measuring Instruments
Explore PCE Instruments’ wide selection of monitoring, analysis, testing and measuring instruments used to measure various parameters in the physical, electrical and chemical spectra. Choose from more than 800 different kinds of desktop and handheld measuring and test equipment in stock and ready to ship to your location. No matter the task, you’re sure to find the right tool for your application with PCE Instruments.
1
3
A
B
C
D
E
F
G
H
I
L
M
N
O
P
R
S
T
U
V
W
Order no.: PCE-HVAC 6-ICA
The current clamp PCE-HVAC 6-ICA was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6-ICA current clamp is ideal for many inspection and maintenance jobs in this area.
- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Order no.: PCE-HVAC 6-ICA
The HVAC meter PCE-HVAC 6-ICA was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6-ICA HVAC meter is ideal for many inspection and maintenance jobs in this area.
- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Order no.: PCE-BMM 10
This PCE-BMM 10 digital multimeter is equipped for mobile as well as stationary operation. The digital multimeter PCE-BMM 10 can be used with mains voltage (AC power adapter) as well as in battery mode as supply voltage. A large range of functions of the measuring ranges leaves hardly anything to be desired.
- DC voltage
- AC voltage
- DC
- AC
- Diode test
- Frequency measurement
- Continuity measurement
- Resistance measurement
Manufacturer: PCE Instruments
Order no.: PCE-WSAC 50-720
The PCE-WSAC 50-720 is a handy anemometer for showing the actual wind speed and the average wind speed of the prior 120 and 300 seconds. The measuring of minimal wind motion can be easily achieved by this accurate device. There are many outdoor areas of industry, e.g. excavation, wind farms, forestry, in which the PCE-WSAC 50-720 anemometer can be usefully deployed.
- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 230 V AC
- Signal input: 0...10 V
- incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ-ICA
The decibel meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322A decibel meter has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ-ICA
The noise dose meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322A noise dose meter has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ-ICA
The noise meter / sound meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322A noise meter / sound meter has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ-ICA
The sound level meter / noise level meter PCE-322ALEQ is ideal for long term monitoring of noise in various environments.
The sound level meter / noise level meter PCE-322ALEQ can be connected to the PC with a USB cable.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ-ICA
The SPL meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322A SPL meter has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-WSAC 50W 230
The anemometer PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the anemometer means stormy gusts can also be monitored.
- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
Order no.: PCE-WSAC 50W 230-ICA
The anemometer PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safey purposes. Due to the integrated 4 ... 20-mA analogue output of the anemometer, the measured data can also be transferred to other controllers for evaluation.
- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-TG 250
PCE-TG 250 is a portable Material Thickness Meter with an easy-to-read 4-digit display. This ultrasound-based Material Thickness Meter uses a contact transducer (included) to measure the thickness of coated and uncoated ferrous and non-ferrous metal, glass, plastic, and other homogeneous materials including aluminum, brass, copper, iron, lead, nickel, steel, gold, titanium, pyrex and quartz glass, nylon, polyethylene, and silicone rubber.
- Measurement range: 1 mm ... 250 mm / 0.04 in ... 9.84 in (uncoated steel), 2.5 mm ... 20 mm / 0.1 in ... 0.79 in (coated surfaces)
- Accuracy: ±0.5% of
measured value
+ 0.02 mm / 0.0008 in
- Resolution: 0.01 mm / 0.0004 in (Less than 100 mm / 3.9 inch); 0.1 mm / 0.004 in (over 100 mm / 3.9 inch)
- Sound velocity: 1000 m/s ... 9999 m/s / 3280 ft/s ... 32805 ft/s
Manufacturer: PCE Instruments
Order no.: PCE-DRB 10
With the Abbe refractometer PCE-DRB 10 the refraction index and the Brix value can be determined precisely. The refractometer shows you the refractive index between 1.3000 and 1.7000 nD and the Brix value between 0 and 100%. In addition to the measuring parameters, the Abbe Refractometer has a high reading and measuring accuracy.
- Measurement parameters: Refraction index, sugar content, thermometer
- Measures refractive index and sugar content
- Robust housing
- Thermostat connection
- For stationary measurement
- Clearly arranged LED touch screen
Manufacturer: PCE Instruments
Order no.: PCE-666
The Probe Thermometer PCE-666 is a combined thermometer which can measure with or without contact. The Probe Thermometer is equipped with a measuring tip and a measuring clamp. As soon as the measuring tip is unfolded, it will start a temperature measurement automatically. If this is not the case, the measuring clamp will be used for the measurement.
- Measurement values displayed in °C or °F
- Auto Power Off, Hold function
- Quick measuring sequence (short measuring time)
- Distance-to-target ratio of 1:1
Manufacturer: PCE Instruments
Order no.: PCE-HT 50
The hygrometer PCE-HT 50 is suitable for continuous monitoring of the room climate. This is how the hygrometer finds its application in homes or at work. The hygrometer has an internal sensor for air temperature and humidity.
- Measures temperature and humidity
- With second external cable temperature sensor
- Display of date and time
- With alarm function
- Battery operation
Manufacturer: PCE Instruments
Order no.: PCE-777N
The Infrared Thermometer PCE-777N measures non-destructively and from a distance, the temperature of surfaces via infrared beam. This small Infrared Thermometer is characterized by simple operation and the red sighting tool.
- Temperature range: -30 ... 260°C / -22 ... 500°F
- Measuring spot (measuring distance to measuring spot size): 8: 1
- Resolution: 0.1°C / 0.18°F
Manufacturer: PCE Instruments
Order no.: PCE-PH 22
The waterproof environmental meter is used for fast and accurate measurement of pH and temperature. Due to the practical double display, both values can be read simultaneously on the environmental meter. The waterproof and robust housing (IP 67) means the environmental meter can be used under difficult conditions.
- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67
Manufacturer: PCE Instruments
Order no.: PCE-PH 22
The waterproof Swimming Pool pH Meter is used for fast and accurate measurement of pH and temperature. Due to the practical double display, both values can be read simultaneously on the pH meter. The waterproof and robust housing (IP 67) means the pH meter can be used under difficult conditions.
- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67
Manufacturer: PCE Instruments
Order no.: PCE-MSM 4
The decibel meter PCE-MSM 4 has features that you will only find in other more expensive devices. The sound level meter in a slim design is ideal for mobile measurements of sound.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ± 1.4 dB
- Frequency range: 31.5 Hz ... 8 kHz
Manufacturer: PCE Instruments
Order no.: PCE-MSM 4
The noise dose meter PCE-MSM 4 has features that you will only find in other more expensive devices. The noise dose meter in a slim design is ideal for mobile measurements of sound.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ± 1.4 dB
- Frequency range: 31.5 Hz ... 8 kHz
Manufacturer: PCE Instruments
Measuring Instruments - Videos
Measuring instruments are used in a variety of fields in a number of ways. The following videos provide insight into how measuring instruments are used in industrial, commercial and logistical applications.
Video: Measuring Instruments Temperature Data Logger PCE-T 1200
Video: Testing Instruments Drain Camera PCE-PIC Series
