Measuring Instruments

Explore PCE Instruments’ wide selection of monitoring, analysis, testing and measuring instruments used to measure various parameters in the physical, electrical and chemical spectra. Choose from more than 800 different kinds of desktop and handheld measuring and test equipment in stock and ready to ship to your location. No matter the task, you’re sure to find the right tool for your application with PCE Instruments.
Order no.: PCE-VA 20-ICA

The PCE-VA 20 is a versatile multifunction air flow meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 260-ICA
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the condition monitoring tachometer-stroboscope also has the option of removing the rotational contacts and measuring temperatures.  

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
- LED Flash frequency: 100 ... 99990 FPM
- Temperature measurement: Type K, PT 1000
- Infrared
- Incl. ISO calibration certificate (only for the tachometer function)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VMS 100
This PCE-VMS 100 vibration meter is a simple construction device for vibration control in machines and installations. This device detects vibrations caused by balance mismatches, defective adjustments, loose parts, defects in rollers or gears. When the threshold set in the device is reached or exceeded, an alarm is sent or the machine is turned off. 

- Digital indicator and vibration sensor for predictive maintenance
- PCE-DPD-U: Universal power supply 18… 265V AC (50 / 60Hz) / DC; 14 mm red 4-digit LED display
- PCE-AC420-210 sensor: Measuring range 0.2 ... 20 mm / s; Linear frequency range (± 3 dB) 10 ... 1000 Hz; Degree of protection IP67
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MCA 50-ICA
The digital multimeter PCE-MCA 50 is intended for calibration and maintenance. This digital multimeter PCE-MCA 50 enables the measurement and simulation of electrical quantities. Due to the battery operation, the digital multimeter PCE-MCA 50 can be used in different locations.

- Simulation
- Pulse generation
- Pulse count
- Frequency generation
- Frequency measurement
- Extreme value and average measurement
- Continuity test
- USB interface
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-670
Infrared thermometer PCE-670 for non-contact measurement of surface temperature. The PCE-670 infrared thermometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-670-ICA
Infrared thermometer PCE-670-ICA incl. ISO calibration certificate for non-contact measurement of surface temperature. The PCE-670 infrared thermometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 6-ICA
The car measuring device PCE-HVAC 6-ICA was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6-ICA car measuring device is ideal for many inspection and maintenance jobs in this area.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 6-ICA
The clamp meter PCE-HVAC 6-ICA was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6-ICA clamp meter is ideal for many inspection and maintenance jobs in this area.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 6-ICA
The current clamp PCE-HVAC 6-ICA was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6-ICA current clamp is ideal for many inspection and maintenance jobs in this area.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 6-ICA
The HVAC meter PCE-HVAC 6-ICA was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6-ICA HVAC meter is ideal for many inspection and maintenance jobs in this area.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BMM 10
This PCE-BMM 10 digital multimeter is equipped for mobile as well as stationary operation. The digital multimeter PCE-BMM 10 can be used with mains voltage (AC power adapter) as well as in battery mode as supply voltage. A large range of functions of the measuring ranges leaves hardly anything to be desired.

- DC voltage
- AC voltage
- DC
- AC
- Diode test
- Frequency measurement
- Continuity measurement
- Resistance measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322ALEQ-ICA
The decibel meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322A decibel meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322ALEQ-ICA
The noise dose meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322A noise dose meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322ALEQ-ICA
The noise meter / sound meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322A noise meter / sound meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322ALEQ-ICA
The sound level meter / noise level meter PCE-322ALEQ is ideal for long term monitoring of noise in various environments. The sound level meter / noise level meter PCE-322ALEQ can be connected to the PC with a USB cable.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322ALEQ-ICA
The SPL meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322A SPL meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50W 230
The anemometer PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the anemometer means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50W 230-ICA

The anemometer PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safety purposes. Due to the integrated 4 ... 20-mA analogue output of the anemometer, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TG 250

PCE-TG 250 is a portable Material Thickness Meter with an easy-to-read 4-digit display. This ultrasound-based Material Thickness Meter uses a contact transducer (included) to measure the thickness of coated and uncoated ferrous and non-ferrous metal, glass, plastic, and other homogeneous materials including aluminum, brass, copper, iron, lead, nickel, steel, gold, titanium, pyrex and quartz glass, nylon, polyethylene, and silicone rubber.


- Measurement range: 1 mm ... 250 mm / 0.04 in ... 9.84 in (uncoated steel), 2.5 mm ... 20 mm / 0.1 in ... 0.79 in (coated surfaces)
- Accuracy: ±0.5% of measured value + 0.02 mm / 0.0008 in
- Resolution: 0.01 mm / 0.0004 in (Less than 100 mm / 3.9 inch); 0.1 mm / 0.004 in (over 100 mm / 3.9 inch)
- Sound velocity: 1000 m/s ... 9999 m/s / 3280 ft/s ... 32805 ft/s

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DRB 10
With the Abbe refractometer PCE-DRB 10 the refraction index and the Brix value can be determined precisely. The refractometer shows you the refractive index between 1.3000 and 1.7000 nD and the Brix value between 0 and 100%. In addition to the measuring parameters, the Abbe Refractometer has a high reading and measuring accuracy.

- Measurement parameters: Refraction index, sugar content, thermometer
- Measures refractive index and sugar content
- Robust housing
- Thermostat connection
- For stationary measurement
- Clearly arranged LED touch screen
Manufacturer: PCE Instruments
Test Instruments manufacturer