Measuring Instruments

Explore PCE Instruments’ wide selection of monitoring, analysis, testing and measuring instruments used to measure various parameters in the physical, electrical and chemical spectra. Choose from more than 800 different kinds of desktop and handheld measuring and test equipment in stock and ready to ship to your location. No matter the task, you’re sure to find the right tool for your application with PCE Instruments.
Multifunction HVAC Meter PCE-HVAC 3-ICA Incl. ISO Calibration Certificate
£ 308.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-HVAC 3 is a HVAC meter or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the HVAC meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 HVAC meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F
- Incl. ISO calibration certificate

Noise Dose Meter PCE-SLD 10
£ 320.00
Price excl. VAT &. delivery
2 year Warranty
The noise dose meter PCE-SLD 10 is used for permanent monitoring of the sound level. In addition to storing the measured values, the PCE-SLD 10 noise dose meter is able to display the measured values ​​on a display and output them as a 4 ... 20-mA analog value.

- Measuring range: 30 ... 130 dB
- Measurement accuracy: Based on class 2 according to IEC61672
- Resolution: 0.1 dB
- LC display
- SD card memory up to 16 GB
- external microphone
- Analog output with 4 ... 20-mA
Vibration Meter PCE-WVS 50
£ 343.00
Price excl. VAT &. delivery
2 year Warranty
Portable vibration meter used to monitor, diagnose, control and solve problems related to the vibration velocity of various industrial equipment.

- Vibration velocity: 0,01 ... 200 mm/s
- Vibration acceleration: 0,1 ...  200 m/s²
- Vibration displacement: 2 ... 2000 μm
- Frequency range: 10 ... 1000 Hz
- Accuracy: ± 5
- Display: OLED, 0,91"
Sound Dose Meter PCE-SLD 10-ICA Incl. ISO Calibration Certificate
£ 400.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Sound Dose Meter PCE-SLD 10 is used for permanent monitoring of the sound level. In addition to storing the measured values, the PCE-SLD 10 Sound Dose Meter is able to display the measured values ​​on a display and output them as a 4 ... 20-mA analog value.

- Measuring range: 30 ... 130 dB
- Measurement accuracy: Based on class 2 according to IEC61672
- Resolution: 0.1 dB
- LC display
- SD card memory up to 16 GB
- external microphone
- Analog output with 4 ... 20-mA
- Incl. ISO calibration certificate
Ultrasonic Wall Thickness Gauges PCE-TG 150A
£ 468.00
Price excl. VAT &. delivery
2 year Warranty
The ultrasonic wall thickness gauges can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic wall thickness gauges.

- Measuring range: 1.00 ... 300.0 mm
- Resolution: 0.01 mm at ≤99.99 mm
- Accuracy: ±0.5 % of Mw. + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
Condition Monitoring Sound Level Meter PCE-322ALEQ-ICA incl ISO Calibration Cert
£ 481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The condition monitoring sound level meter is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The condition monitoring sound level meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Data Logging Sound Level Meter PCE-322ALEQ-ICA incl. ISO Calibration Certificate
£ 481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The data logging sound level meter / noise level meter PCE-322ALEQ is ideal for long term monitoring of noise in various environments. The data logging sound level meter / noise level meter PCE-322ALEQ can be connected to the PC with a USB cable.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Decibel Meter PCE-322ALEQ-ICA incl. ISO Calibration Certificate
£ 481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The decibel meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322A decibel meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Noise Meter / Sound Meter PCE-322ALEQ-ICA incl. ISO Calibration Certificate
£ 481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The noise meter / sound meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322A noise meter / sound meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

SPL Meter PCE-322ALEQ-ICA incl. ISO Calibration Certificate
£ 481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The SPL meter PCE-322A is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322A SPL meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Wall Moisture Meter PCE-WMT 200
£ 489.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With the Bluetooth wall moisture meter, up to 44 different types of wood can be checked for their moisture content. These include 36 hardwoods and 8 softwoods, such as beech, spruce, pine and maple, etc.

- 44 different types of wood
- Ramming electrode with pairs of needles
- Up to 150% moisture
- Bluetooth 4.0 interface
UV-Stroboscope PCE-LES 103UV-385 with 3 UVA high-power LEDs
£ 574.00
Price excl. VAT &. delivery
2 year Warranty
Motion analysis of rotating machines is quick and easy with our UV stroboscope. The UV stroboscope is equipped with 3 high-power UVA LEDs (385 nm), which together generate a light intensity of 317 μW/cm² at a distance of 30 cm.

Flash frequency: 60 ... 300000 FPM
Accuracy: 0.001 %
- Light colour: UV light (380 ... 390 nm)
- Digital pulse width modulation
- Phase shift - 360 ° ... + 360 °
- Quick adjustment with x2 and ÷2 button
3 UVA high-power LEDs
Manometer PCE-PDA 10L
£ 620.00
Price excl. VAT &. delivery
2 year Warranty

The manometer PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The manometer PCE-PDA 10L has many different pressure measuring functions.


- Measuring range: ± 20 kPa  / ± 2.9 psi / ± 0.2 bar
- Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement
- Pitot tube not included in delivery / optionally selectable

Thermal Imaging Camera PCE-TC 30N
£ 667.00
Price excl. VAT &. delivery
2 year Warranty
The PCE-TC 30N thermal imaging camera for preventive maintenance is the ideal tool for maintenance and servicing. This thermal imaging camera is a must-have for electricians, fitters or general maintenance personnel for troubleshooting and fault prevention of electrical equipment, electromechanical devices, production process machinery, heating, ventilation and air conditioning systems, especially when working in harsh environments.

- IR resolution: 160 x 120 pixels
- Measuring range: -20 ... 450°C / -4  ... 842°F 
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function
Ultrasonic Wall Thickness Gauges PCE-TG 150A-ICA incl. ISO calibration certificate
£ 683.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The ultrasonic wall thickness gauges can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic wall thickness gauges.

- Measuring range: 1.00 ... 300.0 mm
- Resolution: 0.01 mm at ≤99.99 mm
- Accuracy: ±0.5 % of Mw. + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
incl. ISO calibration certificate
Ultrasonic Flow Meter PCE-UFM 10
£ 823.00
Price excl. VAT &. delivery
2 year Warranty
With our ultrasonic flow meter , you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN10 / 3/8" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s
- Resolution: 0.001 m/s
- Accuracy: 2%
Pipe size: DN 10 / 3/8"
- Display Type: OLED
- Analog Output: 4 ... 20mA
Ultrasonic Flow Meter PCE-UFM 4
£ 823.00
Price excl. VAT &. delivery
2 year Warranty
With our ultrasonic flow meter , you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN4 / 1/8" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s
- Resolution: 0.001 m/s
- Accuracy: 2%
Pipe size: DN 4 / 1/8"
- Display Type: OLED
- Analog Output: 4 ... 20mA
Ultrasonic Flow Meter PCE-UFM 8
£ 823.00
Price excl. VAT &. delivery
2 year Warranty
With our ultrasonic flow meter , you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN8 / 1/4" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s
- Resolution: 0.001 m/s
- Accuracy: 2%
Pipe size: DN 8 / 1/4"
- Display Type: OLED
- Analog Output: 4 ... 20mA