Measuring Instruments

Explore PCE Instruments’ wide selection of monitoring, analysis, testing and measuring instruments used to measure various parameters in the physical, electrical and chemical spectra. Choose from more than 800 different kinds of desktop and handheld measuring and test equipment in stock and ready to ship to your location. No matter the task, you’re sure to find the right tool for your application with PCE Instruments.
Order no.: PCE-353

PCE-353 is a sound level meter, sound pressure level (SPL) meter, decibel (dB) meter, noise meter or noise dose meter used for acoustic measurements. With this meter, you are able to measure sound exposure level (SEL) as well as equivalent continuous sound level (Leq), , measurements commonly used in assessing industrial noise.


- Measuring range: 30 ... 130 dB
- Measurement parameters: Lp, Lmax, Leq, LN
- Resolution: 0.1 dB
- Accuracy: ±1 dB
- Frequency: 20 Hz ... 12.5 kHz
- Frequency weighting: A, C, F (Flat)
- Memory: Stores up to 30 groups with measuring conditions

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-353

PCE-353 is a sound meter, sound pressure level (SPL) meter, decibel (dB) meter, noise meter or noise dose meter used for acoustic measurements. With this meter, you are able to measure sound exposure level (SEL) as well as equivalent continuous sound level (Leq), measurements commonly used in assessing industrial noise.


- Measuring range: 30 ... 130 dB
- Measurement parameters: Lp, Lmax, Leq, LN
- Resolution: 0.1 dB
- Accuracy: ±1 dB
- Frequency: 20 Hz ... 12.5 kHz
- Frequency weighting: A, C, F (Flat)
- Memory: Stores up to 30 groups with measuring conditions

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-353

PCE-353 is a sound level meter, sound pressure level (SPL) meter, decibel (dB) meter, noise meter or noise dose meter used for acoustic measurements. With this meter, you are able to measure sound exposure level (SEL) as well as equivalent continuous sound level (Leq), measurements commonly used in assessing industrial noise.


- Measuring range: 30 ... 130 dB
- Measurement parameters: Lp, Lmax, Leq, LN
- Resolution: 0.1 dB
- Accuracy: ±1 dB
- Frequency: 20 Hz ... 12.5 kHz
- Frequency weighting: A, C, F (Flat)
- Memory: Stores up to 30 groups with measuring conditions

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 3

PCE-HVAC 3 is a multifunction HVAC meter, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HDM 5-ICA
The handy PCE-HDM 5-ICA digital multimeter is ideal for beginners in electrical engineering. With its small dimensions, the PCE-HDM 5-ICA digital multimeter fits into any drawer or glove compartment of the car. Both AC voltage and current as well as DC voltage and current can be measured with the PCE-HDM 5 digital multimeter. The resistance measurement, the diode test and the continuity test are also part of the functionality of the PCE-HDM 5-ICA, the digital multimeter.

- CAT III 600V
- Bluetooth interface
- DC and AC voltage
- DC and AC
- Resistance
- Diode test
- TRMS (50/60 Hz)
- Capacity
- Temperature (type K thermocouple)
- Frequency
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 11-ICA

The Vane Anemometer PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.


- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F
- USB interface
- Incl. ISO Calibration Certificate 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 28

The IR HVAC Meter was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the thermometer can be adjusted, depending on the operation purpose. Besides taking infrared images, the thermometer can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.


- Measurement range: -20 ... 300°C / -4 ... 572°F
- Accuracy: ± 2%, ± 2°C / 3.6°F
- Frequency image recording: 9 Hz
- Camera: 48608 Pixel

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VDL 16I
The data logger PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this data logger is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR10

Infrared Thermometer with LCD for continuous measurement of surface temperature of all solid materials, designed for fixed installation.


- Temperature range: -40 ... 600 °C / -40 ... 1112 °F
- Accuracy: ± 1% or ± 1°C / 1.8°F
- Optical resolution: 15:1
- Storage conditions: -40 ... 85°C / -40 ... 185°F
- Spectral range: 8.0 ... 14 µm
- Emissivity: 0.100 - 1.000 adjustable in digital mode, by units of 0.001
- Outputs: analogue, USB, RS-232, RS-485, relay

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WL 1

PCE-WL 1 is a wind speed alarm / wind alarm controller sensor with data logger used for the continuous monitoring of wind speed. Wind speed data is recorded and stored in .csv format to the included microSD card memory (max. 2 GB).


- Measuring range: 0.9 ... 40 m/s (approx. 2 ... 89 mph)
- Accuracy: ± 0.5 m/s or 5% of measured value
- Built-in heater for optimal performance in cold temperatures (requires external power source)
- Sensor ingress protection (IP) rating: IP54 for dust and water
- Data logger unit features 1 NTC, 1 analog and 2 digital inputs

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 2700

PCE-VT 2700 is a factory-calibrated (certificate included) portable digital battery-powered accelerometer used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) /
  9 Hz ... 10 kHz
(in 10 kHz mode) acceleration; 10 Hz ... 1 kHz velocity /
  displacement
- Resolution: 0.1 m/s2 / 0.1 yd/s2; 0.1 mm/s / 0.003 in/s;
  1 µm / 3.3814e-14 oz ; 1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 2700

PCE-VT 2700 is a factory-calibrated (certificate included) portable digital battery-powered vibration analyzer used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) / 9 Hz ... 10 kHz (in 10 kHz
  mode) acceleration; 10 Hz ... 1 kHz velocity / displacement
- Resolution: 0.1 m/s² / 0.1 yd/s²; 0.1 mm/s / 0.003 in/s ; 1 µm / 3.3814e-14 oz ;
  1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 2700

PCE-VT 2700 is a factory-calibrated (certificate included) portable digital battery-powered vibration meter used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) / 9 Hz ... 10 kHz (in 10 kHz
  mode) acceleration; 10 Hz ... 1 kHz velocity / displacement
- Resolution: 0.1 m/s² / 0.1 yd/s²; 0.1 mm/s / 0.003 in/s ; 1 µm / 3.3814e-14 oz ;
  1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TDS 100HS

PCE-TDS 100HS is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31-WB

The PCE-VM 31-WB Condition Monitoring Human Vibration Meter or Analyzer is designed for measuring human vibration at the workplace. The Condition Monitoring Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes whole-body sensor only - hand-arm sensor sold separately (see   
  accessories)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HDM 7
This digital multimeter PCE-HDM 7 is a compact measuring instrument with double-molded plastic housing. The digital multimeter has a very large, high-contrast LC display. The PCE-HDM 7 digital multimeter is designed in CAT III / 600 V / EN61010-1. The digital multimeter has a measuring range automatic high measuring accuracy. 

- CAT III 600V
- Bluetooth interface
- DC and AC voltage
- DC and AC
- Resistance
- TRMS (50 ... 400 Hz)
- Capacity
- Temperature (type K thermocouple)
- Frequency
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THA 10

The Multifunction Air Flow Meter PCE-THA 10 is easy to operate with one hand thanks to its compact size, the new structure and integrated impeller. In addition to the wind speed, the Air Flow Meter measures the temperature, humidity, dew point, the wet bulb temperature and the air volume. Average values can be determined with the Air Flow Meter from the 20 preset points.


- Temperature measuring range: -15 ... 50°C / 5 ... 122°F
- Humidity range: 5 ... 95% RH
- Air speed: 0.4 ... 35 m / s
- Air flow: 0 ... 9.999 m3 / s

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 26FN
The PCE-CT 26FN thickness meter can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN thickness meter is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm
- Resolution: 1 μm
- Accuracy: ± (3% + 2 μm)
- Wear-resistant sensor
- V-groove for measurement on pipes
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-353-ICA

The class 2 decibel meter PCE-353 is indispensable for professionals to take measurements to determine the noise pollution at workplaces. The PCE-353 decibel meter has the Leq function which allows measurement of integrated sound level (Leq). With an internal memory this decibel meter is ideal for measurements over long periods of time.


- Class 2
- Measuring range: 30 ... 130 dB
- Measurement parameters: Lp, Lmax, Leq, LN
- Resolution: 0.1 dB
- Accuracy: ±1 dB
- Frequency: 20 Hz ... 12.5 kHz
- Frequency weighting: A, C, F (Flat)
- Memory: Stores up to 30 groups with measuring conditions 
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-353-ICA

The class 2 Environmental Tester PCE-353 is indispensable for professionals to take measurements to determine the noise pollution at workplaces. The PCE-353 environmental tester has the Leq function which allows measurement of integrated sound level (Leq). With an internal memory this environmental tester is ideal for measurements over long periods of time.


- Class 2
- Measuring range: 30 ... 130 dB
- Measurement parameters: Lp, Lmax, Leq, LN
- Resolution: 0.1 dB
- Accuracy: ±1 dB
- Frequency: 20 Hz ... 12.5 kHz
- Frequency weighting: A, C, F (Flat)
- Memory: Stores up to 30 groups with measuring conditions 
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer