Measuring Instruments

Explore PCE Instruments’ wide selection of monitoring, analysis, testing and measuring instruments used to measure various parameters in the physical, electrical and chemical spectra. Choose from more than 800 different kinds of desktop and handheld measuring and test equipment in stock and ready to ship to your location. No matter the task, you’re sure to find the right tool for your application with PCE Instruments.
Order no.: PCE-VT 1100

The vibration analyzer is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration analyzer, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Easy to handle and battery operated
- Standard probe: 10mm

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100S

The PCE-VT 1100S vibration analyzer is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this vibration analyzer is used for rapid measurement of imbalance and for checking bearing and gear conditions.

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Handy and battery operated
- Needle probe: 45mm / 1.77"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100

The vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units only
- Holds the reading after each measurement
- Easy to handle and battery operated
- Standard probe: 10mm

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100S

The PCE-VT 1100S vibration meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration
- Holds the reading after each measurement in metric units
- Handy and battery operated
- Needle probe: 45mm / 1.77"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50

PCE-WSAC 50 is an Wind Alarm Controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This Wind Speed Alarm allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 4

The differential pressure meter PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature. The measurements of the differential pressure meter PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.


- Various parameters: psi, kPa, inHg, amHg, bar, °C, °F
- Measuring range: -60 ... 537°C / -70 ... 998°F
- Built-in ambient temperature sensor
- Battery warning indicator
- Overload indicator
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 4

The HVAC meter PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature. The measurements of the HVAC meter PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.


- Various parameters: psi, kPa, inHg, amHg, bar, °C, °F
- Measuring range: -60 ... 537°C / -70 ... 998°F
- Built-in ambient temperature sensor
- Battery warning indicator
- Overload indicator
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 4

The manometer PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature. The measurements of the manometer PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.


- Various parameters: psi, kPa, inHg, amHg, bar, °C, °F
- Measuring range: -60 ... 537°C / -70 ... 998°F
- Built-in ambient temperature sensor
- Battery warning indicator
- Overload indicator
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 4

The pressure gauge PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature. The measurements of the pressure gauge PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.


- Various parameters: psi, kPa, inHg, amHg, bar, °C, °F
- Measuring range: -60 ... 537°C / -70 ... 998°F
- Built-in ambient temperature sensor
- Battery warning indicator
- Overload indicator
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 4

The pressure meter PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature. The measurements of the pressure meter PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.


- Various parameters: psi, kPa, inHg, amHg, bar, °C, °F
- Measuring range: -60 ... 537°C / -70 ... 998°F
- Built-in ambient temperature sensor
- Battery warning indicator
- Overload indicator
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 28

The Infrared Imaging Camera PCE-TC 28 was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the infrared imaging camera can be adjusted, depending on the operation purpose. Besides taking infrared images, the infrared imaging camera can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.


- Measurement range: -20 ... 300°C / -4 ... 572°F
- Accuracy: ±2%, ±2°C
- Frequency image recording: 9 Hz
- Camera: 48608 Pixel

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 28

PCE-TC 28 is an infrared thermometer designed for non-contact temperature measurement. This infrared thermometer has adjustable emissivity and captures infrared images. This infrared thermometer also can take normal pictures, as well as a mixture of both normal and infrared, due to the built-in digital camera.

- Measurement range: -20 ... 300 °C / -4 ... 572 °F
- Accuracy: ±2 %, ±2 °C
- Frequency image recording: 9 Hz
- Camera: 48608 Pixel

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 28

The Pyrometer PCE-TC 28 was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the pyrometer can be adjusted, depending on the operation purpose. Besides taking infrared images, the pyrometer can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.


- Measurement range: -20 ... 300°C / -4 ... 572°F
- Accuracy: ±2%, ±2°C
- Frequency image recording: 9 Hz
- Camera: 48608 Pixel

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 28

The Thermal Imager PCE-TC 28 was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the thermal imager can be adjusted, depending on the operation purpose. Besides taking infrared images, the thermal imager can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.


- Measurement range: -20 ... 300°C / -4 ... 572°F
- Accuracy: ±2%, ±2°C
- Frequency image recording: 9 Hz
- Camera: 48608 Pixel

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 28

The Thermal Imaging Camera PCE-TC 28 was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the thermography camera can be adjusted, depending on the operation purpose. Besides taking infrared images, the thermography camera can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.


- Measurement range: -20 ... 300°C / -4 ... 572°F
- Accuracy: ±2%, ±2°C
- Frequency image recording: 9 Hz
- Camera: 48608 Pixel

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 28

The Thermometer was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the thermometer can be adjusted, depending on the operation purpose. Besides taking infrared images, the thermometer can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.


- Measurement range: -20 ... 300°C / -4 ... 572°F
- Accuracy: ±2%, ±2°C
- Frequency image recording: 9 Hz
- Camera: 48608 Pixel

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HDM 20
The multimeter PCE-HDM 20 is a universal measuring instrument. The multimeter PCE-HDM 20 allows a variety of measurement projects. This makes it easy to investigate current, voltage, capacitance, frequency and resistances.

- Thermal imager function
- DC voltage
- AC voltage (TRMS)
- DC and AC voltage (TRMS)
- Direct current
- Alternating current (TRMS)
- Coil current
- Diode test
- Resistance and continuity test
- Frequency
- Duty cycle
- Temperature (Thermoelement Type K)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HDM 20
The Electrical Tester PCE-HDM 20 is a universal measuring instrument. The Electrical Tester PCE-HDM 20 allows a variety of measurement projects. This makes it easy to investigate current, voltage, capacitance, frequency and resistances.

- Thermal imager function
- DC voltage
- AC voltage (TRMS)
- DC and AC voltage (TRMS)
- Direct current
- Alternating current (TRMS)
- Coil current
- Diode test
- Resistance and continuity test
- Frequency
- Duty cycle
- Temperature (Thermoelement Type K)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HDM 20
The infrared imaging camera PCE-HDM 20 is a universal measuring instrument. The infrared imaging camera PCE-HDM 20 allows a variety of measurement projects. This makes it easy to investigate current, voltage, capacitance, frequency and resistances.

- Thermal imager function
- DC voltage
- AC voltage (TRMS)
- DC and AC voltage (TRMS)
- Direct current
- Alternating current (TRMS)
- Coil current
- Diode test
- Resistance and continuity test
- Frequency
- Duty cycle
- Temperature (Thermoelement Type K)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HDM 20
The thermal imager PCE-HDM 20 is a universal measuring instrument. The thermal imager PCE-HDM 20 allows a variety of measurement projects. This makes it easy to investigate current, voltage, capacitance, frequency and resistances.

- Thermal imager function
- DC voltage
- AC voltage (TRMS)
- DC and AC voltage (TRMS)
- Direct current
- Alternating current (TRMS)
- Coil current
- Diode test
- Resistance and continuity test
- Frequency
- Duty cycle
- Temperature (Thermoelement Type K)
Manufacturer: PCE Instruments
Test Instruments manufacturer