Measuring Instruments

Explore PCE Instruments’ wide selection of monitoring, analysis, testing and measuring instruments used to measure various parameters in the physical, electrical and chemical spectra. Choose from more than 800 different kinds of desktop and handheld measuring and test equipment in stock and ready to ship to your location. No matter the task, you’re sure to find the right tool for your application with PCE Instruments.

A

B

C

D

E

F

G

H

I

L

M

N

O

P

R

S

T

U

V

W

Dissolved Oxygen Meter PCE-DOM 10
£ 254.00
Price excl. VAT &. delivery
The Dissolved Oxygen Meter is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analysis can be carried out on the oxygen content in a very short time and with an integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

  • Measuring range up to 20 mg / L
  • For oxygen analysis
  • Temperature compensation up to 50°C / 122°F
  • For measurement in liquids and in air
  • Exchangeable oxygen sensor
IoT Meter PCE-SM61
£ 292.00
Price excl. VAT &. delivery
The IoT meter allows you to quickly and easily query your process data via the Internet. Any device with RS485 interface can be connected to IoT meter. The data is retrieved via a web browser and can be carried out simultaneously by the PC, smartphone, tablet, etc., and by several users. In addition to the data query, the data logger can trigger alarms. The configuration can be done via USB or Ethernet interface.

  • up to 100 devices with 25 registers can be connected
  • Configuration via webbrowser
  • Interface: RS485, Ethernet
  • Memory: 1 GB Flash
  • additional inputs / outputs: digital input or relay output (selectable)

IoT Meter PCE-CP 10
£ 295.00
Price excl. VAT &. delivery
Wireless
The multi-parameter IoT meter PCE-CP 10 is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter IoT meter. With this multi-parameter IoT meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

  • Bluetooth connection with app
  • 503 nm / 570 nm / 620 nm LED
  • Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)Parameters:
  • Alkalinity
  • Chlorine free
  • Chlorine total
  • Cyanuric acid
  • pH
Photometer PCE-CP 10
£ 295.00
Price excl. VAT &. delivery
Wireless
The multi-parameter photometer PCE-CP 10 is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter photometer. With this multi-parameter photometer it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

  • Bluetooth connection with app
  • 503 nm / 570 nm / 620 nm LED
  • Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)Parameters:
  • Alkalinity
  • Chlorine free
  • Chlorine total
  • Cyanuric acid
  • pH
PAT Tester / Portable Appliance Testing Equipment PCE-EVSE 310
£ 296.00
Price excl. VAT &. delivery
Topseller
The PAT tester / portable appliance testing equipment is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

  • PE pre-test
  • Proximity Pilot PP / Control Pilot CP
  • Simulation CP fault "E" / PE fault
  • Mains socket for measuring purposes
  • Safety measuring sockets
  • Optional adapter to type 1
PAT Tester / Portable Appliance Testing Equipment PCE-EVSE 310+
£ 296.00
Price excl. VAT &. delivery
Topseller
The PAT tester / portable appliance testing equipment is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

  • PE pre-test
  • Proximity-Pilot PP / Control-Pilot CP
  • Simulation CP error "E" / PE error
  • Mains socket for measuring purposes
  • Safety measuring sockets
  • incl. type 2 plug and adapter to type 1
Psychrometer PCE-HVAC 3-ICA Incl. ISO Calibration Certificate
£ 314.00
Price excl. VAT &. delivery
ISO Calibration
The multifunction psychrometer or diagnostic measuring device is used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the psychrometer calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the psychrometer.

  • Relative humidity: 0 … 100% RH
  • Ambient / dew-point temp.: -30 … 100°C / -22 … 212°F
  • Wet-bulb temp.: 0 … 80°C / 32 … 176°F
  • Incl. ISO calibration certificate
Thickness Gauge PCE-TG 150A
£ 472.00
Price excl. VAT &. delivery
The thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness gauge.

  • Measuring range: 1.00 … 300.0 mm  / 0.04 … 11.81"
  • Resolution: 0.01 mm at ≤99.99 mm                       0.1 mm at ≥100.0 mm
  • Accuracy: ±0.5% of measured value + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
    The thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the thickness gauge.
  • Measuring range: 1.00 … 300.0 mm
  • Resolution: 0.01 mm at ≤99.99 mm
  • Accuracy: ±0.5 % of Mw. + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
Digital Thermometer PCE-JR 911-ICA incl. ISO Calibration Certificate
£ 476.00
Price excl. VAT &. delivery
ISO Calibration

With the digital thermometer you get a measuring device with which you can perform a wide range of measuring tasks. On the one hand, you can directly measure and read the temperature of bodies without contact, on the other hand you can also save the measured values internally in the data logger and transfer them to a PC or laptop via the RS-232 interface.

  • Range: -40 … +500 °C / -40 … 932 °F
  • Resolution: 0.1 °C / 0.18 °F
  • Accuracy: ±2%
  • Memory: 4 x 99 values
  • E-factor: 0.3 … 1.0 (adjustable)
  • incl. software and RS-232 cable
  • incl. ISO calibration certificate