Measuring Instruments
Explore PCE Instruments’ wide selection of monitoring, analysis, testing and measuring instruments used to measure various parameters in the physical, electrical and chemical spectra. Choose from more than 800 different kinds of desktop and handheld measuring and test equipment in stock and ready to ship to your location. No matter the task, you’re sure to find the right tool for your application with PCE Instruments.
1
3
A
B
C
D
E
F
G
H
I
L
M
N
O
P
R
S
T
U
V
W
Order no.: PCE-330
PCE-330 is a multifunction digital HVAC meter or hygro-thermometer with a quick-response sensor for determining ambient temperature, relative humidity and dew point temperature. Equipped with an easy-to-read dual display, this data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.
- Temperature range: -20 ... 60°C / -4 ... 140°F
- Relative humidity range: 0 ... 100% RH
- Resolution: 0.1° / 0.18°F
- Accuracy: ± 0.8°C / ± 1.5°F, ± 2.0 ... 4.0% RH
Manufacturer: PCE Instruments
Order no.: PCE-DRB 2
PCE-DRB 2 is a handheld digital refractometer used to determine the refractive index and dextran, fructose, glucose, lactose and maltose content (%) of liquid. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.
Measurement parameters:
- Dextran, fructose, glucose, lactose, maltose, temperature
- Measurement range: 1.3330 ... 1.5177 nD
- Resolution: 0.0001 nD
- Accuracy: ±0.0003 nD
- Automatic temperature compensation (ATC)
Manufacturer: PCE Instruments
Order no.: PCE-DRH 1
PCE-DRH 1 is a handheld digital refractometer used to determine the sugar content / water content / degrees Baumé (Bé°) / refractive index of honey in the 0 ... 90 % Brix / 5 ... 38% water / 33 ... 48 Bé° / 1.3330 ... 1.5177 nD measuring range. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.
Measurement parameters:
- Brix, water content, degrees Baumé (Bé°), refractive index, temperature
- Measurement range: 0 ... 90 % Brix
- Resolution: 0.1 % Brix
- Accuracy: ±0.2 % Brix
- Automatic temperature compensation (ATC)
Manufacturer: PCE Instruments
Order no.: PCE-BMM 10-ICA
This PCE-BMM 10 digital multimeter is equipped for mobile as well as stationary operation. The digital multimeter PCE-BMM 10 can be used with mains voltage (AC power adapter) as well as in battery mode as supply voltage. A large range of functions of the measuring ranges leaves hardly anything to be desired.
- DC voltage
- AC voltage
- DC
- AC
- Diode test
- Frequency measurement
- Continuity measurement
- Resistance measurement
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Order no.: PCE-WSAC 50
PCE-WSAC 50 is an air flow meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This air flow meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.
- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The accelerometer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this accelerometer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The climate data logger meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this climate data logger meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The vibration meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this vibration meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The environmental meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this environmental meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The environmental tester PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this environmental tester is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The humidity detector PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this humidity detector is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The hygrometer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this hygrometer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The light meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this light meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The lux meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this lux meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The shock data logger PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this shock data logger is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The temperature meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this temperature meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The thermo hygrometer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this thermo hygrometer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The thermometer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this thermometer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The vibration analyzer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this vibration analyzer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments
Order no.: PCE-VDL 16I
The vibration meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this vibration meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Manufacturer: PCE Instruments