Measuring Instruments

Explore PCE Instruments’ wide selection of monitoring, analysis, testing and measuring instruments used to measure various parameters in the physical, electrical and chemical spectra. Choose from more than 800 different kinds of desktop and handheld measuring and test equipment in stock and ready to ship to your location. No matter the task, you’re sure to find the right tool for your application with PCE Instruments.
Order no.: PCE-TG 250

PCE-TG 250 is a portable Material Thickness Meter with an easy-to-read 4-digit display. This ultrasound-based Material Thickness Meter uses a contact transducer (included) to measure the thickness of coated and uncoated ferrous and non-ferrous metal, glass, plastic, and other homogeneous materials including aluminum, brass, copper, iron, lead, nickel, steel, gold, titanium, pyrex and quartz glass, nylon, polyethylene, and silicone rubber.


- Measurement range: 1 mm ... 250 mm / 0.04 in ... 9.84 in (uncoated steel), 2.5 mm ... 20 mm / 0.1 in ... 0.79 in (coated surfaces)
- Accuracy: ±0.5% of measured value + 0.02 mm / 0.0008 in
- Resolution: 0.01 mm / 0.0004 in (Less than 100 mm / 3.9 inch); 0.1 mm / 0.004 in (over 100 mm / 3.9 inch)
- Sound velocity: 1000 m/s ... 9999 m/s / 3280 ft/s ... 32805 ft/s

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50W 230-ICA

The anemometer PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safey purposes. Due to the integrated 4 ... 20-mA analogue output of the anemometer, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DRB 10
With the Abbe refractometer PCE-DRB 10 the refraction index and the Brix value can be determined precisely. The refractometer shows you the refractive index between 1.3000 and 1.7000 nD and the Brix value between 0 and 100%. In addition to the measuring parameters, the Abbe Refractometer has a high reading and measuring accuracy.

- Measurement parameters: Refraction index, sugar content, thermometer
- Measures refractive index and sugar content
- Robust housing
- Thermostat connection
- For stationary measurement
- Clearly arranged LED touch screen
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-666

The Probe Thermometer PCE-666 is a combined thermometer which can measure with or without contact. The Probe Thermometer is equipped with a measuring tip and a measuring clamp. As soon as the measuring tip is unfolded, it will start a temperature measurement automatically. If this is not the case, the measuring clamp will be used for the measurement.


- Measurement values displayed in °C or °F
- Auto Power Off, Hold function
- Quick measuring sequence (short measuring time)
- Distance-to-target ratio of 1:1

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 50
The hygrometer PCE-HT 50 is suitable for continuous monitoring of the room climate. This is how the hygrometer finds its application in homes or at work. The hygrometer has an internal sensor for air temperature and humidity. 

- Measures temperature and humidity
- With second external cable temperature sensor
- Display of date and time
- With alarm function
- Battery operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-777N

The Infrared Thermometer PCE-777N measures non-destructively and from a distance, the temperature of surfaces via infrared beam. This small Infrared Thermometer is characterized by simple operation and the red sighting tool.

- Temperature range: -30 ... 260°C / -22 ... 500°F
- Measuring spot (measuring distance to measuring spot size): 8: 1
- Resolution: 0.1°C / 0.18°F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 22

The waterproof environmental meter is used for fast and accurate measurement of pH and temperature. Due to the practical double display, both values can be read simultaneously on the environmental meter. The waterproof and robust housing (IP 67) means the environmental meter can be used under difficult conditions.

- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 22

The waterproof Swimming Pool pH Meter is used for fast and accurate measurement of pH and temperature. Due to the practical double display, both values can be read simultaneously on the pH meter. The waterproof and robust housing (IP 67) means the pH meter can be used under difficult conditions.

- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THA 10

The multifunction anemometer PCE-THA 10 is easy to operate with one hand thanks to its compact size, the new structure and integrated impeller. In addition to the wind speed, the anemometer measures the temperature, humidity, dew point, the wet bulb temperature and the air volume. Average values can be determined with the anemometer from the 20 preset points. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Temperature measuring range: -15 ... 50°C / 5 ... 122°F
- Humidity range: 5 ... 95% RH
- Air speed: 0.4 ... 35 m / s
- Air flow: 0 ... 9.999 m3 / s

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSM 4

The decibel meter PCE-MSM 4 has features that you will only find in other more expensive devices. The sound level meter in a slim design is ideal for mobile measurements of sound.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ± 1.4 dB
- Frequency range: 31.5 Hz ... 8 kHz

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSM 4

The noise dose meter PCE-MSM 4 has features that you will only find in other more expensive devices. The noise dose meter in a slim design is ideal for mobile measurements of sound.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ± 1.4 dB
- Frequency range: 31.5 Hz ... 8 kHz

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSM 4

The Noise Meter / Sound Meter PCE-MSM 4 has features that you will only find in other more expensive devices. The noise meter in a slim design is ideal for mobile measurements of sound.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ± 1.4 dB
- Frequency range: 31.5 Hz ... 8 kHz

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSM 4

The sound level indicator PCE-MSM 4 has features that you will only find in other more expensive devices. The sound level meter in a slim design is ideal for mobile measurements of sound.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ± 1.4 dB
- Frequency range: 31.5 Hz ... 8 kHz

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSM 4

The Sound Pressure Level or SPL meter PCE-MSM 4 has features that you will only find in other more expensive devices. The SPL meter in a slim design is ideal for mobile measurements of sound.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ± 1.4 dB
- Frequency range: 31.5 Hz ... 8 kHz

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 6
The car measuring device PCE-HVAC 6 was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6 car measuring device is ideal for many inspection and maintenance jobs in this area.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 6
The clamp meter PCE-HVAC 6 was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6 clamp meter is ideal for many inspection and maintenance jobs in this area.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 6
The current clamp PCE-HVAC 6 was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6 current clamp is ideal for many inspection and maintenance jobs in this area.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DPG 200
The manometer PCE-DPG 200 is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this manometer is versatile.

- Measuring range: 0 ... 2900 psi, 0 ... 200 bar
- Resolution: 1.45 psi, 0.1 bar
- Scaled bar graph
- Measurable media: gases, water
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DRA 1

PCE-DRA 1 is a handheld digital antifreeze refractometer used to determine the percentage or content and freezing point of propylene glycol- and ethylene glycol-based solutions. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Ethylene glycol %, propylene glycol %, temperature °C
- Measuring range: 0 ... 100 % ethylene glycol
- Resolution: 0.1 % / 0.1 °
- Accuracy: ±0.5 % / ±0.5 °C
- Automatic temperature compensation (ATC)
- Easy calibration with distilled water

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DRC 1

PCE-DRC 1 is a handheld digital refractometer used to determine the specific gravity (sg) of electrolyte solution batteries as well as the freezing point of propylene or ethylene glycol-based coolants. The refractometer also works well for measuring cleaning products. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Coolant or antifreeze (ethylene glycol), propylene glycol,
   battery acid, cleaning supplies, temperature

- Measurement range: -50 ... 0 °C
- Resolution: 0.1 °
- Accuracy: ±0.5 °C
- Automatic temperature compensation (ATC)

Manufacturer: PCE Instruments
Test Instruments manufacturer