Measuring Instruments
Explore PCE Instruments’ wide selection of monitoring, analysis, testing and measuring instruments used to measure various parameters in the physical, electrical and chemical spectra. Choose from more than 800 different kinds of desktop and handheld measuring and test equipment in stock and ready to ship to your location. No matter the task, you’re sure to find the right tool for your application with PCE Instruments.
1
3
A
B
C
D
E
F
G
H
I
L
M
N
O
P
R
S
T
U
V
W
Order no.: PCE-A420
Without a doubt, the main advantage of this handheld cup vane air flow meter is that it doesn't need to be held exactly in the direction of the wind. Air flow meter with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane Air flow meter, wind direction will not influence the measurement.
- 0.9 to 35.0 m/s
- 2.5 to 126.0 km/h
- 1.4 to 68.0 knots
- 1.6 to 78.2 miles/h
Manufacturer: PCE Instruments
Order no.: PCE-423
The PCE-423 Hot wire anemometer with thermal sensor is highlighted by its good relation between price and quality. The Hot wire anemometer has a high resolution to be used for different applications. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.
- Kind of sensor: Hot wire
- External
- Memory: No
- Interface: USB
- Measurement range: 0.1 ... 25.0 m/s, 0.2 ...55.8 mph
- Resolution: 0.01 m/s, 0.1 mph
Manufacturer: PCE Instruments
Order no.: PCE-HDM 7-ICA
This digital multimeter PCE-HDM 7-ICA is a compact measuring instrument with double-molded plastic housing. The digital multimeter has a very large, high-contrast LC display. The PCE-HDM 7-ICA digital multimeter is designed in CAT III / 600 V / EN61010-1. The digital multimeter has a measuring range automatic high measuring accuracy.
- CAT III 600V
- Bluetooth interface
- DC and AC voltage
- DC and AC
- Resistance
- TRMS (50 ... 400 Hz)
- Capacity
- Temperature (type K thermocouple)
- Frequency
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-CT 26FN-ICA
The PCE-CT 26FN NDT tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN NDT tester is ideally suited to immediately detect, for example, accident damage to the vehicle.
- Measuring range: 0 ... 1250 μm / 0 ... 49.2 mils
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-CT 26FN-ICA
The PCE-CT 26FN thickness meter can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN thickness meter is ideally suited to immediately detect, for example, accident damage to the vehicle.
- Measuring range: 0 ... 1250 μm / 0 ... 49.2 mils
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-DMM 11
The manometer PCE-DMM 11 is distinguished by the long battery life of 1800 h. The rotatable housing and display completes the functionality of the manometer. Thus, the manometer PCE-DMM 11 is ideal for mobile applications, such as test beds.
- Up to 600 bar / 8702 psi
- Relative pressure
- Revolving 4.5 digit display
- Max-Min function
- Different units
Manufacturer: PCE Instruments
Order no.: PCE-TC 25
The PCE-TC 25 thermal imager camera with built-in digital camera helps detect thermal problems in electrical installations, detect mechanical faults, perform preventive maintenance and save energy.
- Measuring range: -20 ... 380 °C
- Measures e.g. dew point & humidity
- Field of view: 32 x 32 °
- Frame rate: 9 Hz
- Picture-in-picture function
- Micro-SD card memory
Manufacturer: PCE Instruments
Order no.: PCE-JR 911
Infrared thermometer for temperatures up to + 500 °C. The measured data can be stored and snet to a computer later on, but the main significant feature of this infrared thermometer is the built-in printer. This makes the test instrument very attractive for use in food applications. As all test equipment, this infrared thermometer is delivered manufacturer calibrated and can additionally be certified to ISO.
- Temperature range: -40 to 500 °C / -40 ... 932 °F
- Resolution: 0.1 °C / 0.18 °F
- Accuracy: ±2 % of reading or ±2 °C / 3.6 °F
- Optical resolution: 8:1
- Emissivity: 0.3 to 1.0 (adjustable)
- Interface: RS-232
- Display: LCD
Manufacturer: PCE Instruments
Order no.: PCE-VDL 24I
For this data logger PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.
- 3-Axis acceleration up to 1600 Hz and ±16 g
- Evaluation software
- 32 GB SD memory card
- 32 GB SD memory card
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Manufacturer: PCE Instruments
Order no.: PCE-VMS 501
The wireless PCE-VMS 501 Vibration Sensor detects vibration within an acceleration range of up to 30 g and a frequency range between 5 and 10 KHz. The wireless vibration sensors, which measures vibrations at machines to transfer those wireless vibrations to a receiving unit.
- Acceleration range: up to 300 m/s2
- Wireless communication via ZigBee
- Frequency range between 5 Hz and 10 kHz
- Wireless transferring Piezo sensors
- Transmission rate of 1 minute per sensor
Manufacturer: PCE Instruments
Order no.: PCE-428-EKIT
The class 2 outdoor sound level meter PCE-428-EKIT, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The outdoor sound level meter is equipped with an octave band frequency filter. Optionally, the outdoor sound level meter PCE-428-EKIT can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with a sound level meter over a long period of time, even in the rain.
- Accuracy class 2
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time
weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- incl. ISO calibration certificate
- incl. outdoor noise level meter kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise
Manufacturer: PCE Instruments
Order no.: PCE-VMS 504
The wireless PCE-VMS 504 Vibration Monitor detects vibration within an acceleration range of up to 30 g and a frequency range between 5 and 10 KHz. The wireless vibration monitor therefore features external vibration sensors, which measures vibrations at machines to transfer those wireless to a receiving unit.
- Acceleration range: up to 300 m/s2
- Wireless communication via ZigBee
- Frequency range between 5 Hz and 10 kHz
- Wireless transferring Piezo sensors
- Data memory (receiving base) 128 MB
Manufacturer: PCE Instruments
Order no.: PCE-CT 26FN
The PCE-CT 26FN automotive tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN automotive tester is ideally suited to immediately detect, for example, accident damage to the vehicle.
- Measuring range: 0 ... 1250 μm / 0 ... 49.2 mils
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
Manufacturer: PCE Instruments
Order no.: PCE-CT 26FN
The PCE-CT 26FN coating thickness gauge can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN coating thickness gauge is ideally suited to immediately detect, for example, accident damage to the vehicle.
- Measuring range: 0 ... 1250 μm / 0 ... 49.2 mils
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
Manufacturer: PCE Instruments
Order no.: PCE-CT 26FN
The PCE-CT 26FN material tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN material tester is ideally suited to immediately detect, for example, accident damage to the vehicle.
- Measuring range: 0 ... 1250 μm / 0 ... 49.2 mils
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
Manufacturer: PCE Instruments
Order no.: PCE-CT 26FN
The PCE-CT 26FN NDT tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN NDT tester is ideally suited to immediately detect, for example, accident damage to the vehicle.
- Measuring range: 0 ... 1250 μm / 0 ... 49.2 mils
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
Manufacturer: PCE Instruments
Order no.: PCE-CT 26FN
The PCE-CT 26FN paint thickness gauge can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN paint thickness gauge is ideally suited to immediately detect, for example, accident damage to the vehicle.
- Measuring range: 0 ... 1250 μm / 0 ... 49.2 mils
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
Manufacturer: PCE Instruments
Order no.: PCE-CT 26FN
The PCE-CT 26FN surface testing - coating thickness gauge can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN surface testing - coating thickness gauge is ideally suited to immediately detect, for example, accident damage to the vehicle.
- Measuring range: 0 ... 1250 μm / 0 ... 49.2 mils
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
Manufacturer: PCE Instruments
Order no.: PCE-CT 26FN
The PCE-CT 26FN thickness gauge can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN thickness gauge is ideally suited to immediately detect, for example, accident damage to the vehicle.
- Measuring range: 0 ... 1250 μm / 0 ... 49.2 mils
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
Manufacturer: PCE Instruments
Order no.: PCE-VA 11
The Air Flow Meter PCE-VA 11 is an extensively used measuring instrument. This air flow meter offers the opportunity to determine air speeds, air temperature and infrared temperature. The illuminated LCD allows comfortable readings and facilitates use in dimly lit areas.
- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F
Manufacturer: PCE Instruments