Skip to main content

Measuring Instruments

Explore PCE Instruments’ wide selection of monitoring, analysis, testing and measuring instruments used to measure various parameters in the physical, electrical and chemical spectra. Choose from more than 800 different kinds of desktop and handheld measuring and test equipment in stock and ready to ship to your location. No matter the task, you’re sure to find the right tool for your application with PCE Instruments.

A

B

C

D

E

F

G

H

I

L

M

N

O

P

R

S

T

U

V

W

Wind Measurer PCE-A 430
£ 67.00
Price excl. VAT &. delivery
The wind measurer enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The wind measurer is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Wind Speed Meter PCE-A 430
£ 67.00
Price excl. VAT &. delivery
The wind speed meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The wind speed meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Durometer PCE-DD-A Shore A
£ 89.00
Price excl. VAT &. delivery

The PCE-DD-A durometer is used to measure Shore A hardness in soft gums, rubber, elastomers and more. This compact pocket sized tester is ideal for checking / testing rubber hardness (tyre condition checker). Calibration is not available for this item.

  • Measurement area: 0 … 100 Shore A
  • Resolution: 0.5
  • Accuracy: ± 1
  • Depth of indentation: 0 … 2.5 mm / .1 in
  • Indenter: 35°
Environmental Meter PCE-PH 22
£ 89.00
Price excl. VAT &. delivery

The waterproof environmental meter is used for fast and accurate measurement of pH and temperature. Due to the practical double display, both values can be read simultaneously on the environmental meter. The waterproof and robust housing (IP 67) means the environmental meter can be used under difficult conditions.

  • Measuring range: 0.0 … 14.0 pH
  • Resolution: 0.01 pH
  • Accuracy: ± 0.02 pH
  • 100 points Datalogger
  • (ATC) in the range 0 … 80°C / 32 … 176°F
  • Waterproof to IP 67

NDT Test Instruments PCE-DD-A Shore A
£ 89.00
Price excl. VAT &. delivery

The PCE-DD-A durometer is used to measure Shore A hardness in soft gums, rubber, elastomers and more. This compact pocket sized tester is ideal for checking / testing rubber hardness (tyre condition checker). Calibration is not available for this item.

  • Measurement area: 0 … 100 Shore A
  • Resolution: 0.5
  • Accuracy: ± 1
  • Depth of indentation: 0 … 2.5 mm / .1 in
  • Indenter: 35°
Radiation Detector PCE-RDM 5
£ 89.00
Price excl. VAT &. delivery

The Radiation Detector is a small sensitive radiation measuring instrument used for monitoring X-rays, gamma and beta radiation. The Radiation Detector uses an energy-compensated Geiger-Müller counting tube as a detector for accurate measurement.


  • β- and X-ray radiation
  • Measuring range max.: 9.999 µSv/h
  • Measuring range min.: 0.08 µSv/h
  • alarm function
  • battery operation
  • vibration alarm 
  • Type USB C charging port
Swimming Pool pH Meter PCE-PH 22
£ 89.00
Price excl. VAT &. delivery

The waterproof Swimming Pool pH Meter is used for fast and accurate measurement of pH and temperature. Due to the practical double display, both values can be read simultaneously on the pH meter. The waterproof and robust housing (IP 67) means the pH meter can be used under difficult conditions.

  • Measuring range: 0.0 … 14.0 pH
  • Resolution: 0.01 pH
  • Accuracy: ± 0.02 pH
  • 100 points Datalogger
  • (ATC) in the range 0 … 80°C / 32 … 176°F
  • Waterproof to IP 67

Damp Meter PCE-PMI 1BT
£ 104.00
Price excl. VAT &. delivery
Wireless

The damp meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the damp meter. This guarantees a non-destructive measurement with the damp meter. The damp meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

  • Measuring range: 0.0 … 100.0%
  • Resolution: 0.1%
  • Measuring depth: 20 … 40 mm / 0.78 … 1.57"
  • Interface: Bluetooth 4.0
  • Free Android and iOS app

IoT Sensor PCE-PMI 1BT
£ 104.00
Price excl. VAT &. delivery
Wireless

The IoT sensor has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the IoT sensor. This guarantees a non-destructive measurement with the IoT sensor. The IoT sensor is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

  • Measuring range: 0.0 … 100.0%
  • Resolution: 0.1%
  • Measuring depth: 20 … 40 mm / 0.78 … 1.57"
  • Interface: Bluetooth 4.0
  • Free Android and iOS app

Radiation Detector PCE-RDM 10
£ 151.00
Price excl. VAT &. delivery
With a measurement range of 0 to 99.99 µSv/h, the radiation detector covers a wide range of measurement tasks. The radiation detector has an accuracy of 0.25 counts per second per microsievert per hour (0.25 cps/µSv/h), making it a highly precise measuring instrument.

  • Measurement range: 0.01 … 99.99 µSv/h
  • Resolution: 0.01 µSv/h
  • Detectable radiation: γ-rays, β-rays, X-rays
  • Sensitivity: 0.25 cps/
  • Data storage for 167,857 values
  • Real-time value, average value
  • Accumulated value in mSv for long-term measurements
  • Adjustable alarm threshold
Compressor PCE-ACO 9500
£ 178.00
Price excl. VAT &. delivery
ISO Calibration
The brushless compressor with a pressure capacity of 9.5 bar is a powerful device that is used to cool compatible endoscope camera tubes. With its high pressure capacity, the brushless compressor is ideal for use with the endoscope to cool the camera tube and clean the viewing area in front of the camera head.

  • Max. pressure: 9.5 bar
  • Pressure setting range: 0.3-0.9 MPa
  • Data output in MPa, bar, PSI.
  • Flow rate: 125 L/min
  • Motor power: 1,000 W-Voltage: 110 … 220 VAC
  • Speed: 2800 rpm
  • LCD display
  • Oil-free
Building Moisture Meter PCE-PMI 3
£ 231.00
Price excl. VAT &. delivery
The building moisture meter is a small and reliable measuring instrument for the determination of existing moisture in, for example, concrete and wood. Corresponding scales for measuring moisture are already stored in the library of the building moisture meter.

  • Relative scale: 0.0 … 99.9%
  • Accuracy: ± 0.5%
  • Resolution: 0.1%
  • For measurements on wood and concrete
  • Individually adjustable alarm limits
  • Setting in CM% possible
  • Numerical and graphical view
  • Results are delivered by Carbit method
Concrete tester PCE-PMI 3
£ 231.00
Price excl. VAT &. delivery
The Concrete tester is a small and reliable measuring instrument for the determination of existing moisture in, for example, concrete and wood. Corresponding scales for measuring moisture are already stored in the library of the Concrete tester.

  • Relative scale: 0.0 … 99.9%
  • Accuracy: ± 0.5%
  • Resolution: 0.1%
  • For measurements on wood and concrete
  • Individually adjustable alarm limits
  • Setting in CM% possible
  • Numerical and graphical view
  • Results are delivered by Carbit method
Grain Moisture Meter PCE-GMM 10
£ 234.00
Price excl. VAT &. delivery

The grain moisture meter is a compact moisture analyzer for up to 18 different cereals. This material moisture meter is an important tool in mills, granaries or in processing industries of cereals and legumes.

  • For 18 cereals
  • Small amount of sample
  • Temperature compensation: automatic
High-temperature pH electrode PCE-PH-LAB-HTE for waste water, sludge
£ 242.00
Price excl. VAT &. delivery
The laboratory pH electrode offers precise and reliable measurements in a wide range of applications. With its robust design and high-quality workmanship, it is ideal for laboratory environments.

  • Standard pH electrode
  • Measuring range: 0 ... 14 pH
  • Diameter: 9 mm
  • Temperature range: 0 ... 130 °C
  • Shaft / sensor material: Glass
  • Connection: BNC
  • Application: Waste water, sludge
Accelerometer PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The accelerometer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this accelerometer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Climate Data Logger Meter PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The climate data logger meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this climate data logger meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Condition Monitoring Vibration Meter PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The Condition Monitoring Vibration Meter from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this Condition Monitoring Vibration Meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Data Logger for Temperature and Humidity PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The data logger for temperature and humidity from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this data logger is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Environmental Meter PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The environmental meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this environmental meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Environmental Tester PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The environmental tester PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this environmental tester is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Food Thermometer PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The Food Thermometer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this Food Thermometer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Humidity Detector PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The humidity detector PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this humidity detector is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Light Meter PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The light meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this light meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
  • Light Measuring range: 0.045 … 188,000 Lux
  • Resolution: 0.045 Lux
  • 32 GB SD memory card
  • Evaluation software
  • Temperature, Humidity, Air pressure, Vibration
  • 3-Axis acceleration up to 800 Hz
Lux Meter PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The lux meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this lux meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • Light Measuring range: 0.045 … 188,000 Lux
  • Resolution: 0.045 Lux
  • 32 GB SD memory card
  • Evaluation software
  • Temperature, Humidity, Air pressure, Vibration
  • 3-Axis acceleration up to 800 Hz

Shock Data logger PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The shock data logger PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this shock data logger is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Temperature Data Logger PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The temperature data logger PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this temperature data logger is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Thermo Hygrometer PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The thermo hygrometer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this thermo hygrometer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Thermometer PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The thermometer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this thermometer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Vibration Analyzer PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The vibration analyzer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this vibration analyzer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Vibration Recorder PCE-VDL 16I
£ 245.00
Price excl. VAT &. delivery
The vibration recorder PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this vibration recorder is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Absolute Moisture Meter for Soil PCE-SMM 1
£ 276.00
Price excl. VAT &. delivery

PCE-SMM 1 is an absolute moisture meter for soil ideal for use in agriculture, crop science, horticulture, botany, landscaping, gardening and environmental testing applications. This portable handheld moisture meter or analyzer measures soil moisture or humidity quickly, easily and accurately.


  • Moisture measurement range: 0 … 50 %
  • Resolution: 0.1 %
  • Accuracy: ±5 % +5 digits
  • 250 mm / 9.84" long probe

Car Measuring Device PCE-DRA 1 Ethylene Glycol / Propylene Glycol
£ 276.00
Price excl. VAT &. delivery

PCE-DRA 1 is an antifreeze car measuring device used to determine the percentage or content and freezing point of propylene glycol- and ethylene glycol-based solutions. This waterproof IP65-rated car measuring device features automatic temperature compensation (ATC) from +10 … +40 °C / +50 … +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:

  • Ethylene glycol %, propylene glycol %, temperature °C
  • Measuring range: 0 … 60 % ethylene glycol
  • Resolution: 0.1 % / 0.1 °
  • Accuracy: ±0.5 % / ±0.5 °C
  • Automatic temperature compensation (ATC)
  • Easy calibration with distilled water

Dissolved Oxygen Meter PCE-DOM 20
£ 278.00
Price excl. VAT &. delivery
The Dissolved Oxygen Meter is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

  • Measuring range up to 20 mg / L
  • For oxygen analysis
  • Temperature compensation up to 50°C / 122°F
  • For measurement in liquids and in air
  • Exchangeable oxygen sensor
IoT Sensor PCE-CP 20
£ 311.00
Price excl. VAT &. delivery
Wireless
The multi-parameter IoT sensor is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter IoT sensor. With this multi-parameter IoT sensor, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

  • Bluetooth connection with app
  • 503 nm / 570 nm / 620 nm LED
  • Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)Parameters:
  • Alkalinity
  • Chlorine free
  • Chlorine total
  • Cyanuric acid
  • pH
  • Total hardness
  • Calcium hardness
Photometer PCE-CP 20
£ 311.00
Price excl. VAT &. delivery
Wireless
The multi-parameter photometer PCE-CP 20 is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

  • Bluetooth connection with app
  • 503 nm / 570 nm / 620 nm LED
  • Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)Parameters:
  • Alkalinity
  • Chlorine free
  • Chlorine total
  • Cyanuric acid
  • pH
  • Total hardness
  • Calcium hardness