£ 184.00
Price excl. VAT &. delivery
The HVAC meter has a measuring range of up to 0 … 30 m/s. In addition to the velocity, the HVAC meter can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.
PCE-LD 1 is a portable handheld gas detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive gas leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.
Adjustable high/low sensitivity:6 g/yr or 30 g/yr for R-22 and R-134a8 g/yr or 40 g/yr for R404A, R-407C and R-410A
PCE-LD 1 is a portable handheld leak detector used to locate CFC/HFC leaks. This highly sensitive leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.
Adjustable high / low sensitivity:6 g/yr or 30 g/yr for R-22 and R-134a8 g/yr or 40 g/yr for R404A, R-407C and R-410A
PCE-LD 1 is a portable handheld refrigerant gas leak detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive gas leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.
Adjustable high / low sensitivity:6 g/yr or 30 g/yr for R-22 and R-134a8 g/yr or 40 g/yr for R404A, R-407C and R-410A
PCE-LD 1 is a portable handheld Refrigerant Gauges used to locate CFC/HFC leaks. This highly sensitive Refrigerant Gauges can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases.
Adjustable high / low sensitivity:
6 g/yr or 30 g/yr for R-22 and R-134a8 g/yr or
40 g/yr for R404A, R-407C and R-410A
The thermal / hot wire anemometer has a measuring range of up to 0 … 30 m/s. In addition to the velocity, the thermal / hot wire anemometer can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.
The thermo-anemometer has a measuring range of up to 0 … 30 m/s. In addition to the velocity, the thermo-anemometer can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.
The wind measurer has a measuring range of up to 0 … 30 m/s. In addition to the velocity, the wind measurer can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.
The wind speed meter has a measuring range of up to 0 … 30 m/s. In addition to the velocity, the wind speed meter can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.
The soil Agricultural measuring device is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The soil Agricultural measuring device can be recalibrated by using the calibration solutions that are supplied with the device.
The soil environmental meter is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The soil environmental meter can be recalibrated by using the calibration solutions that are supplied with the device.
The soil environmental tester is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The soil environmental tester can be recalibrated by using the calibration solutions that are supplied with the device.
*Care must be taken when inserting probe to not break it**
The water analysis meter is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The water analysis pH meter can be recalibrated by using the calibration solutions that are supplied with the device.
The car measuring device can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the car measuring device, or you can use the integrated clamp mechanism. By using the clamp of the car measuring device, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.
The clamp meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the clamp meter, or you can use the integrated clamp mechanism. By using the clamp of the clamp meter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.
The clamp on tester PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the clamp on tester, or you can use the integrated clamp mechanism. By using the clamp of the clamp on tester, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.
The current clamp PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the current clamp, or you can use the integrated clamp mechanism. By using the clamp of the current clamp, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.
Measuring instruments are used in a variety of fields in a number of ways. The following videos provide insight into how measuring instruments are used in industrial, commercial and logistical applications.
