Indicator

Order no.: PCE-N50B
The panel indicator has a RS485 Modbus interface. This digital Modbus panel indicator can display the measured data of up to 10 slave devices or registers. 

- Interface: RS 485 Modbus RTU Master
- Number of slave devices / registers: 10
- Baud rate individually adjustable
- Further power supply area
Manufacturer: PCE Instruments
£ 218.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DPD-F1
The built-in display is used to indicate the force and weight, which is detected by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the DMS display makes it possible to display the correct weight in mV / V based on the set sensitivity. The DMS display shows the measured values ​​on a 6-digit LED display. 

- Power supply: 85 ... 265V AC / DC
- Input signal: mV / V for force and weighing sensors
- Display: 6 digits, red
- Digit height : 14 mm
Manufacturer: PCE Instruments
£ 222.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DPD-F2
The built-in display is used to indicate the force and weight, which is determined by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the DMS display makes it possible to display the correct weight in mV / V based on the set sensitivity. The DMS display shows the measured values ​​on a 6-digit LED display. 

- Power supply: 11 ... 60V DC / 24/48V AC
- Input signal: mV / V for force and weighing sensors
- Display: 6 digits, red
- Digit height : 14 mm
Manufacturer: PCE Instruments
£ 231.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-NR30PNet
The power indicator PCE-NR30 is able to measure currents directly up to 63 A AC. The power indicator measures network parameters of symmetrically and asymmetrically loaded single-phase 2-wire systems and three-phase 3 or 4-wire systems.

- DIN rail power meter
- Measurement up to 63 A.
- For single-phase and three-phase systems
- Ethernet
- Data logger
- Profinet
Manufacturer: PCE Instruments
£ 258.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-NR30
The power indicator PCE-NR30 is able to measure currents directly up to 63 A AC. The power indicator measures network parameters of symmetrically and asymmetrically loaded single-phase 2-wire systems and three-phase 3 or 4-wire systems.

- DIN rail power meter
- Measurement up to 63 A.
- For single-phase and three-phase systems
- Ethernet
- Data logger
Manufacturer: PCE Instruments
£ 262.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-NR30IoT
The power indicator PCE-NR30 is able to measure currents directly up to 63 A AC. The power indicator measures network parameters of symmetrically and asymmetrically loaded single-phase 2-wire systems and three-phase 3 or 4-wire systems.

- DIN rail power meter
- Measurement up to 63 A.
- For single-phase and three-phase systems
- Ethernet
- Data logger
- MQTT protocol for Industry 4.0 applications
Manufacturer: PCE Instruments
£ 262.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-ND30

The power indicator PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power indicator PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power display can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.


- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus 

 

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
£ 289.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DMM 11

The pressure indicator PCE-DMM 11 is distinguished by the long battery life of 1800h. The rotatable housing and display completes the functionality of the manometer. Thus, the pressure indicator PCE-DMM 11 is ideal for mobile applications, such as test beds.


- Up to 600 bar / 8702 psi
- Relative pressure
- Revolving 4.5 digit display
- Max-Min function
- Different units 

Manufacturer: PCE Instruments
£ 289.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-G 2
The Temperature Indicator PCE-G 2 is used to measure the environmental parameters of temperature and humidity. The temperature indicator is used in warehouses, open-plan offices, schools, etc.

- Measuring range temperature: -40 ... 85 °C
- Measuring range humidity: 0 ... 99 % r.H.
- 55 mm character height
- Up to 30 m reading distance
- External sensor (wired)
Manufacturer: PCE Instruments
£ 307.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DPG 10-ICA
The pressure indicator is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure indicator is versatile.

- Measuring range: 0 ... 145 psi, 0 ... 10 bar
- Resolution: 0.145 psi, 0.01 bar
- Scaled bar graph
- Measurable media: gases, water
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 364.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DPG 100-ICA
The pressure indicator is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure indicator is versatile.

- Measuring range: 0 ... 1450 psi, 0 ... 100 bar
- Resolution: 0.145 psi, 0.01 bar
- Scaled bar graph
- Measurable media: gases, water
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 364.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DPG 200-ICA
The pressure indicator is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure indicator is versatile.

- Measuring range: 0 ... 2900 psi, 0 ... 200 bar
- Resolution: 1.45 psi, 0.1 bar
- Scaled bar graph
- Measurable media: gases, water
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 364.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DPG 25-ICA
The pressure indicator is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure indicator is versatile.

- Measuring range: 0 ... 362.6 psi, 0 ... 25 bar
- Resolution: 0.145 psi, 0.01 bar
- Scaled bar graph
- Measurable media: gases, water
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 364.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DPG 3-ICA
The pressure indicator is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure indicator is versatile.

- Measuring range: -14.5 ... 43.5 psi, -1 ... 3 bar
- Resolution: 0.0145 psi, 0.001 bar
- Scaled bar graph
- Measurable media: gases, water
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 364.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DPG 6-ICA
The pressure indicator is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure indicator is versatile.

- Measuring range: 0 ... 87 psi, 0 ... 6 bar
- Resolution: 0.0145 psi, 0.001 bar
- Scaled bar graph
- Measurable media: gases, water
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 364.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-NA5

The digital temperature indicator PCE-NA5 is equipped with a 55-digit bar graph display, which is freely programmable. In addition, the digital indicator also comes with a conventional display, which shows the active measuring value as a figure. The digital universal indicator PCE-NA5 is able to process a large variety of signals.


- 55-digit bar graph display
- 4-digit, 7-segment display
- Analogue output
- Four alarm relays

 

Manufacturer: PCE Instruments
£ 374.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DMM 20

The Pressure Indicator PCE-DMM 20 has a two-line display. The pressure indicator can represent pressures up to 600 bar, relative or absolute. The parts of the gauge PCE-DMM 20 that come in contact with liquids are made of stainless steel.


- Max. 600 bar / 8702 psi
- Rotating display
- Battery operation
- Media: gas, water, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: stainless steel
- Accuracy class: 0.1

 

Manufacturer: PCE Instruments
£ 387.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-ULM 10
The level indicator is the ideal measuring device to determine the fill level of a silo. Thanks to the 4 … 20-mA output signal, the level indicator can also be connected to the operational process control.

- Measuring range: 0 ... 10 m / 0 ... 32.8 ft
- Accuracy: 0.5%
- Resolution: 0.001 m
- With display for setting and reading
- Stable M60 connection thread
Manufacturer: PCE Instruments
£ 392.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N50F
The force indicator PCE-N50F is suitable for panel mounting. This force indicator PCE-N50F can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force indicator PCE-N50F.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N50F
The indicator PCE-N50F is suitable for panel mounting. This indicator PCE-N50F can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the indicator PCE-N50F.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Manufacturer: PCE Instruments
£ 529.00

Price excl. VAT &. delivery
2 year Warranty