The pressure indicator PCE-DMM 50 is suitable for stationary and mobile pressure measurement. The pressure indicator PCE-DMM 50 is used in mechanical and plant engineering, laboratory technology and environmental technology. This pressure indicator is battery powered. The measuring range of the pressure indicator reaches up to 600 bar.
- Max. 600 bar / 8702 psi
- Rotating display
- For hygienic applications
- Media: water, oxygen, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: Ceramics
- Accuracy class: 0.2
The pressure indicator PCE-DMM 51 is suitable for flush mounting hygiene. Thus, the indicator can be installed both in the food industry as well as in medical technology. The pressure indicator on its rotatable display pressures up to 400 bar, relative or absolute. The operating fluid of the pressure indicator has a food safe FDA approval.
- Max. 400 bar / 5801 psi
- Rotating display
- For hygienic applications
- Media: water, paints and coatings, gases, viscous and paste media
- Pressure: relative
- Diaphragm: stainless steel flush
- Accuracy class: 0.2
The pressure indicator PCE-DMM 21 is suitable for flush sanitary installation. The pressure indicator may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure indicator has a food safe FDA approval. The flush mounting of the pressure indicator can be sterilized.
- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display
The pressure indicator PCE-DMM 60 is a precision instrument of the highest standards. The pressure indicator is specifically designed for process monitoring and calibration. This pressure indicator is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.
- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05
The PCE-N24S pressure indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S pressure indicator has a 5-digit LED display to allow the user to read the directly measured current values.
- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm
- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display
The PCE-N20I pressure indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.
- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers
PCE-N20U is a pressure indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.
- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers
The pressure indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the pressure indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.
- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs
The compact pressure indicator PCE-DMM 10 is characterized by its rotatable housing and the display and the battery supply. Thus, the pressure indicator PCE-DMM 10 is ideal for mobile applications, such as test beds.
- Max. 250 bar / 3626 psi
- Rotatable 4.5 digit display
- Battery operation
- Media: gases, fuels and oils
- Pressure: relative
- Diaphragm: Ceramic
- Accuracy class: 0.5
The pressure indicator PCE-DMM 11 is distinguished by the long battery life of 1800h. The rotatable housing and display completes the functionality of the manometer. Thus, the pressure indicator PCE-DMM 11 is ideal for mobile applications, such as test beds.
- Up to 600 bar / 8702 psi
- Relative pressure
- Revolving 4.5 digit display
- Max-Min function
- Different units
The Pressure Indicator PCE-DMM 20 has a two-line display. The pressure indicator can represent pressures up to 600 bar, relative or absolute. The parts of the gauge PCE-DMM 20 that come in contact with liquids are made of stainless steel.
- Max. 600 bar / 8702 psi
- Rotating display
- Battery operation
- Media: gas, water, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: stainless steel
- Accuracy class: 0.1
The pressure indicator PCE-DMM 70 is a precision instrument for leakage testing. The pressure indicator is specifically designed for leak testing of pipe networks. The actual pressure indicator and the display of this precision instrument can be separated without tools. The measurement values are stored in the internal memory.
- Max. 400 bar / 5801 psi
- For leakage testing
- Media: water, gases
- Pressure type: Absolute / Relative
- Membrane: Stainless Steel
- Accuracy class: 0.05
