The heating mantle PCE-HM 5000 is used in applications where samples or liquids must be quickly heated in the laboratory. The flask may have a volume of up to 5 liters and it is placed in the crocheted net of the heating mantle. Here it is heated by the heating elements with a power of 800 W, and the temperature can be continuously adjusted up to 450 °C using the rotary switch on the heating mantle.
- Power 800 W
- Operating temperature 0 ... +450 °C
- Fast heat-up time
- For round flasks up to 5,000 ml
The paint thickness tester is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness testers, this paint thickness tester does not have to differentiate between ferrous and non-ferrous metal.
The PCE-G28 is a portable, handheld magnetometer that detects electromagnetic fields (EMFs) and displays measurement results in milliGauss (mG) or microTesla (µT). This magnetometer comes with an external 3-axis electromagnetic sensor (X, Y, Z direction).
- Measurement range: 0 ... 20000 mG / 0 ... 2000 µT
- Accuracy: ± 4% + 3 digits / ± 5% + 3 digits / ± 10% + 5 digits
- Resolution: 0.1 mG / 0.01 µT
The heating mantle PCE-HM 10000 is used in applications where samples or liquids must be quickly heated in the laboratory. The flask may have a volume of up to 10 liters and it is placed in the crocheted net of the heating mantle. Here it is heated by the heating elements with a power of 1200 W, and the temperature can be continuously adjusted up to 450 °C using the rotary switch on the heating mantle.
- Power 1200 W
- Operating temperature 0 ... +450 °C
- Fast heat-up time
- For round flasks up to 10,000 ml
PCE-CT 5000H is a thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness gauge automatically detects the type of metal to be measured.
- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
With this coating thickness gauge, layer thicknesses on metallic surfaces can be reliably determined. The coating thickness gauge has a measuring range of 1500 µm. This means that the coating thickness gauge is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values
The PCE-GM 60Plus gloss meter is a portable handheld 60 degree gloss meter. This coating and paint gloss meter measures the gloss units (GU) on a material's surface. The rechargeable gloss meter or gloss tester uses reflected light for gloss measurement per ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.
- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 200 GU
- 3.5" TFT touchscreen display
- Measuring accuracy ±1.5 GU
- Light source: D65
- Wave length: 400-700 nm
The PCE-MFM 3000 is a handheld magnetometer that detects both static (DC) permanent magnet (rare earth) magnetic and dynamic (AC) electromagnetic fields (EMFs) and displays measurement results in gauss (G) or milli Tesla (mT). This portable magnetometer comes with an external sensor and features an RS-232 port for downloading data to a PC.
- Measurement range: 0 ... 30,000 Gauss DC fields, 0 ... 15,000 Gauss AC 50/60 Hz fields
- Accuracy: ± 5%; + 20 digits (static) / + 10 digits (dynamic)
- Resolution: 0.1 G / 0.01 mT
- Measures both AC (50/60 Hz) and DC magnetic fields, permanent magnets are DC fields
- Single axis Hall sensor (Transverse) with auto temp. compensation
- ISO lab calibration cert available as an optional accessory
With this paint thickness tester, layer thicknesses on metallic surfaces can be reliably determined. The paint thickness tester has a measuring range of 1500 µm. This means that the cpaint thickness tester is used, for example, in a paint shop, for incoming goods inspection or for an expert.
