Laboratory Technology

Heating Mantle PCE-HM 100
£ 126.00
Price excl. VAT &. delivery

The heating mantle PCE-HM 100 is used in applications where samples or liquids must be quickly heated in the laboratory. The flask may have a volume of up to 100 ml and it is placed in the crocheted net of the heating mantle. Here it is heated by the heating elements with a power of 100 W, and the temperature can be continuously adjusted up to 450 °C using the rotary switch on the heating mantle.


  • Power 100 W
  • Operating temperature 0 … +450 °C
  • Fast heat-up time
  • For round flasks up to 100 ml

Paint Adhesion Tester PCE-CRC 10
£ 130.00
Price excl. VAT &. delivery
The Adhesion Tester PCE-CRC 10 is designed to determine the quality of the adhesion of coatings. The Adhesion Tester is suitable for thin, thick or tough coatings on all surfaces. Since the adherence of paintings and other coatings is a crucial product and quality characteristic for their protective effect, adhesion testers are used in a wide range of industries.

  • Evaluation of adhesion
  • For thin, thick or tough coatings
  • Large, non-slip grip
  • Various blades selectable

Paint Thickness Tester PCE-CT 25FN
£ 130.00
Price excl. VAT &. delivery

The paint thickness tester is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness testers, this paint thickness tester does not have to differentiate between ferrous and non-ferrous metal.

  • Measuring range:  0 … 1500 µm
  • Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
  • Measuring accuracy: ± (3% + 1 µm)
  • Resolution: 0.1 µm in the measuring range 0 … 100 µm                      1 µm in the measuring range> 100 µm
Heating Mantle PCE-HM 500
£ 135.00
Price excl. VAT &. delivery

The heating mantle PCE-HM 500 is an auxiliary device, which is used in laboratories. The heating mantle helps to heat or control the temperature of different samples or chemicals in the laboratory. The device has a crocheted net inside, in which you can hang the round bottom flask to heat it.


  • Power 250 W
  • Operating temperature 0 … +450 °C
  • Fast heat-up time
  • For round flasks up to 500 ml

Dust Monitor PCE-RCM 05
£ 154.00
Price excl. VAT &. delivery
The dust monitor is used to continuously measure the particulate matter content at the workplace. The dust monitor displays PM2.5 particulate matter as well as temperature and humidity on the display. 

  • Measuring range PM2.5: 0 … 500 μg / m³
  • Measuring range temperature: -10 … 50°C / 14 … 122°F
  • Measuring range humidity: 0 … 99% rh
  • Pictograms indicate air quality
  • Battery operation
  • Micro USB for charging
Heating Mantle PCE-HM 1000
£ 155.00
Price excl. VAT &. delivery

The heating mantle PCE-HM 1000 is an auxiliary device, which is used in laboratories. The heating mantle helps to heat or control the temperature of different samples or chemicals in the laboratory. The device has a crocheted net inside, in which you can hang the round bottom flask to heat it.


  • Power 350 W
  • Operating temperature 0 … +450 °C
  • Fast heat-up time
  • For round flasks up to 1,000 ml

Heating Mantle PCE-HM 2000
£ 170.00
Price excl. VAT &. delivery

The heating mantle PCE-HM 2000 is used in applications where samples or liquids must be quickly heated in the laboratory. The flask may have a volume of up to 2 liters and it is placed in the crocheted net of the heating mantle. Here it is heated by the heating elements with a power of 450 W, and the temperature can be continuously adjusted up to 450 °C using the rotary switch on the heating mantle.


  • Power 450 W
  • Operating temperature 0 … +450 °C
  • Fast heat-up time
  • For round flasks up to 2000 ml

Dust Monitor PCE-RCM 8
£ 172.00
Price excl. VAT &. delivery
The dust monitor performs many measuring tasks. For example, the dust monitor can measure mass concentration, formaldehyde and TVOC. This dust monitor is specially designed for indoor measurement. 

  • Formaldehyde in mg / m³
  • Measurement of TVOC
  • Temperature measurement
  • Alarm function
  • Mass concentration
Paint Thickness Tester PCE-CT 26FN
£ 183.00
Price excl. VAT &. delivery
The PCE-CT 26FN thickness gauge can measure non-destructive coatings (paints, plastics …) on steel / iron and non-ferrous metals. The PCE-CT 26FN thickness gauge is ideally suited to immediately detect, for example, accident damage to the vehicle. 

  • Measuring range: 0 … 1250 μm / 0 …  49.2 mils 
  • Resolution: 1 μm / 0.039 mils
  • Accuracy: ± (3% + 2 μm / 0.079 mils)
  • Wear-resistant sensor
  • V-groove for measurement on pipes