Laboratory Technology

Paint Gloss Tester PCE-GM 75
£ 379.00
Price excl. VAT &. delivery
2 year Warranty
The gloss meter has a measuring surface of Ø 4.5 mm. Thanks to this small measuring surface, the gloss meter enables measurements on particularly small surfaces. With a maximum inaccuracy of 1%, the gloss meter is a high-precision measuring instrument for fast and easy measurements on surfaces.

- Measuring range up to 1000 GU
- For measurements on small surfaces
- Precise measurements thanks to high accuracy
- Micro-USB interface for the PC connection
- Data memory for later evaluations
- Data memory: 1,245 measured values
Paint Thickness Tester PCE-CT 28
£ 383.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-CT 28 Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous metals without damaging the coating's surface. The Thickness Gauge stands out due to its high range of measurement.


- Measurement range: 0 ... 1250 µm / 49.2 mils
- Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm ... 99.9 µm / 3.9
  mils) 1 µm / 0.04 mils (above the range)
- Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
- Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits

 

Magnetometer PCE-MFM 3500
£ 400.00
Price excl. VAT &. delivery
2 year Warranty
The magnetometer is a reliable measuring device for measuring the existing magnetic field. This magnetometer is suitable for measuring both static/permanent magnet (DC) and alternating magnetic (AC) fields.

- Measuring range up to 30,000 G
- DC Milli Tesla, DC Gauss, Transverse Probe
- AC Milli Tesla, AC Gauss, frequency from 40 to 500 Hz
- Temperature sensor
- Switchable AC or DC measurement
- Memory: Manual / Automatic
Magnetometer PCE-EMF 40
£ 405.00
Price excl. VAT &. delivery
2 year Warranty
With the magnetometer, it is possible to measure magnetic fields up to 2000 mG directly. At the same time, the magnetometer shows the strength of the magnetic field numerically using an X, Y and Z axis.

- Measuring ranges: 20.00 ... 200.0 µT / 200.0 ... 2000 mG
- Bandwidth: 50 MHz ... 3.5 GHz
- Units: V / m, mV / m, V / m, µW / cm², µW / m², mW / m², mA / m
Paint Thickness Tester PCE-CT 29-ICA incl. iso calibration certificate
£ 423.00
Price excl. VAT &. delivery
2 year Warranty
The Paint Thickness Tester has a measuring range of 0 ... 2000 µm. The Paint Thickness Tester can be used to measure the coating thickness on ferrous (Fe) and non-ferrous (NFe) metals.

- Measuring range: 0 ... 2000 µm
- Temperature Measuring range: 0 ... 50 °C 
- Humidity Measuring range: 0 ... 100 % r. h.
- with SSPC measuring function 
- Individually adjustable limit value alarms  
- Data memory with up to 2500 measured values
 - incl. ISO Calibration Certificate
ISO Calibration
Paint Thickness Tester PCE-CT 22BT-ICA incl. ISO Calibration Certificate
£ 420.00
Price excl. VAT &. delivery
2 year Warranty

With this coating thickness gauge, layer thicknesses on metallic surfaces can be reliably determined. The coating thickness gauge has a measuring range of 1500 µm. This means that the coating thickness gauge is used, for example, in a paint shop, for incoming goods inspection or for an expert.


- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values
- incl. ISO Calibration Certificate

ISO Calibration
Air Sampler PCE-MPC 10
£ 432.00
Price excl. VAT &. delivery
2 year Warranty

PCE-MPC 10 is a portable handheld air sampler or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).


- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- 2" full-color LCD with user-friendly graphics
- Integrated data logger with adjustable sampling time
- Internal memory stores up to 5000 date-and-time-stamped data sets

Dust Monitor PCE-MPC 10
£ 432.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-MPC 10 is a portable handheld dust monitor used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this dust monitor also measures air temperature and relative humidity (RH).


- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- 2" full-color LCD with user-friendly graphics
- Integrated data logger with adjustable sampling time
- Internal memory stores up to 5000 date-and-time-stamped data sets

Paint Thickness Tester PCE-CT 23BT-ICA incl. ISO Calibration Certificate
£ 436.00
Price excl. VAT &. delivery
2 year Warranty

With this paint thickness tester, layer thicknesses on metallic surfaces can be reliably determined. The paint thickness tester has a measuring range of 1500 µm. This means that the paint thickness tester is used, for example, in a paint shop, for incoming goods inspection or for an expert.


- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values
- incl. ISO Calibration Certificate

ISO Calibration
Paint Thickness Tester PCE-CT 27FN-ICA incl. ISO Calibration Certificate
£ 444.00
Price excl. VAT &. delivery
2 year Warranty

PCE-CT 27FN is a Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 1250 µm / 0 ... 50 mils
- Accuracy of ±(2 % + 2 µm) / ±(2 % + 0.1 mils)
- Features a resolution of 0.1 µ / 0.1 mils
- incl. ISO Calibration Certificate 

ISO Calibration
Paint Gloss Tester PCE-GM 60Plus-ICA incl. ISO calibration certificate
£ 448.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-GM 60Plus gloss meter is a portable handheld 60 degree gloss meter. This coating and paint gloss meter measures the gloss units (GU) on a material's surface. The rechargeable gloss meter or gloss tester uses reflected light for gloss measurement per ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.


- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 200 GU
- Measuring accuracy ±1.5 GU
- 3.5" TFT touchscreen display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

ISO Calibration
Paint Test Equipment PCE-WNM 100
£ 456.00
Price excl. VAT &. delivery
2 year Warranty
The paint test equipment is used to measure the whiteness of flat surfaces or powders. In particular, the paint  test equipment can be used to measure the white of textile prints, dyes, building materials, cardboard and paper as well as plastics.

- Measuring range: 0 ... 120 
- Resolution: 0.1
- Repeat accuracy : < 0.5
- 457 nm LED illumination
- 45/0 measuring geometry
- For many surfaces and materials
Paint Thickness Tester PCE-TG 75-ICA incl. ISO Calibration Certificate
£ 459.00
Price excl. VAT &. delivery
2 year Warranty
The paint thickness tester can measure material thicknesses up to 225 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

- Measuring range: 1.00 ... 225.0 mm  / 0.04 ... 8.85"
- Resolution: 0.01 mm at ≤99.99 mm
                       0.1 mm at ≥100.0 mm
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 500 measured values
- Calibration reference on housing
- incl. ISO Calibration Certificate
ISO Calibration
Paint Thickness Tester PCE-TG 150
£ 467.00
Price excl. VAT &. delivery
2 year Warranty
The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

- Measuring range: 1.00 ... 300.0 mm  / 0.04 ... 11.81"
- Resolution: 0.01 mm at ≤99.99 mm
                       0.1 mm at ≥100.0 mm
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
Paint Thickness Tester PCE-TG 150-ICA incl. ISO Calibration Certificate
£ 467.00
Price excl. VAT &. delivery
2 year Warranty
The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

- Measuring range: 1.00 ... 300.0 mm  / 0.04 ... 11.81"
- Resolution: 0.01 mm at ≤99.99 mm
                       0.1 mm at ≥100.0 mm
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- incl. ISO Calibration Certificate
ISO Calibration
Turbidity Meter PCE-TUM 20
£ 481.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-TUM 20 is a portable handheld turbidity meter or turbidimeter for water quality analysis. This turbidity measuring device is equipped with a large LCD screen and user-friendly keyboard. The turbidity meter features two automatically switching measuring ranges between 0 ... 50 NTU and 50 ... 1000 NTU for increased accuracy.


- 0 ... 1000 NTU turbidity measuring range
- Infrared LED light source
- Calibration references included

Paint Gloss Tester PCE-GM 80
£ 490.00
Price excl. VAT &. delivery
2 year Warranty
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
Paint Gloss Tester PCE-PGM 60
£ 497.00
Price excl. VAT &. delivery
2 year Warranty

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.


- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Includes PC-compatible software for detailed analysis
- Light source: D65
- Wave length: 400-700 nm