Control Systems

The DIN-Rail Measuring Instrument PCE-SM1 is suitable for making analog signals bus-capable. Various analog signals such as 0 ... 20 mA, 0 ... 10 V, PT100 etc. are converted from the analog input module to RS485 Modbus.

- Input channels: 2
- Inputs: PT100, 0/4 ... 20 mA, 0 ... 10 V, 0 ... 40 Ω
- Interface: RS485 Modbus (ASCII RTU)
- Power supply: 85 ... 253 V / 20 ... 50 V AC / DC (selectable)

The digital universal indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the digital universal indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The frequency indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the frequency indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The panel indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the panel indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The power indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the power indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The pressure indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the pressure indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The process indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the process indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The temperature indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the digital universal indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The voltage indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the voltage indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

To connect the DIN rail measuring instrument PCE-SM4 via the Modbus machines. This makes it possible to initiate various processes via the H-rail measuring device via a connected HMI.

- Output channels: 4 or 8 (selectable)
- Outputs: 4 relays or 8 OC (selectable)
- Interface: RS485 Modbus (ASCII RTU)
- Voltage supply: 85 ... 253 V / 20 ... 50 V AC / DC (selectable)

The process controller / temperature controller is a compact PID controller which can be used in a wide range of applications. On the input side, this temperature controller processes the widely used process signals 4 ... 20 mA and 0 ... 10 V as well as resistance sensors and thermocouples. The temperature controller can be used very flexibly, since different operating modes are available. Besides the simple on / off control with adjustable hysteresis, the digital controller also offers various combinations of the PID control. Thanks to the SMART PID control, this temperature controller achieves the setpoint value very quickly and with a slight overshoot.

- Two 4-digit LED displays
- Two output relays
- Front protected to IP65
- Analogue universal input

The PCE-ND20 built-in power indicator measures 3-phase all network parameters. Power, voltage, and power measurements are no problem for the PCE-ND20 built-in power indicator. The current measurement can be done with the built-in power measuring device 3-phase and directly. However, it is also possible to measure high currents by means of transducers using the built-in power indicator PCE-ND20.

- Illuminated 3.5" LCD display
- Easy installation
- RS485 Modbus interface 

The compact pressure indicator PCE-DMM 10 is characterized by its rotatable housing and the display and the battery supply. Thus, the pressure indicator PCE-DMM 10 is ideal for mobile applications, such as test beds.

- Max. 250 bar / 3626 psi
- Rotatable 4.5 digit display
- Battery operation
- Media: gases, fuels and oils
- Pressure: relative
- Diaphragm: Ceramic
- Accuracy class: 0.5