Control Systems

You will find a wide range of control systems to be used for many different applications from simple displays with different sizes up to complete regulators. Nowadays, control systems are essential instruments in modern production processes. The compact displays of these control systems enable quick and easy view of diverse physical magnitudes, such as temperature, pressure, revolutions and standard process signals which can be found in any automated process. Besides, modern regulators can solve quickly and effectively different control works.

Electric Vehicle EV Tester / EV Test Instrument

Electric Vehicle EV Tester / EV Test PCE-EVSE-KIT2-ICA incl ISO Cal Certificate

£ 1,394.00

Price excl. VAT &. delivery
2 year Warranty

An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The EV Test Instrumentis specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument.

- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- Up to 1000 V terminal voltage
- Low Ohm measurement
- Direct connection for wallboxes
- Adapter with charging plugs type 1 and type 2
- PE conductor test
- Integrated Schuko socket
- incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)

- Sound Sensor

Sound Sensor with Sound Calibrator PCE-SLT-KIT-N

£ 486.00

Price excl. VAT &. delivery
2 year Warranty

The sound sensor consists of a measuring microphone with a handle and a wall bracket on a 1.5 m / 4.9 ft cable, a noise transmitter and a digital display. The main area of application of the sound sensor is the continuous noise measurement and noise monitoring of factory halls, production rooms and at major events (discos, folk festivals, kart tracks, etc.).

- Measuring range: 30...130dB(A)
- Resolution: 0.1 dB
- Accuracy: ±1.5 dB
- Alarm relay: 5A/up to 240VAC
- Input.: 110V or 220V/50Hz or 60HZ
- Including class II sound calibrator

Analogue Indicator

Analogue Indicator PCE-EP29

£ 33.00

Price excl. VAT &. delivery
2 year Warranty

The analogue indicator or display PCE-EP 29 is designed to measure simple three-phase-voltages. The analogue display PCE-EP 29 is designed for alternating currents and can measure up to 500 V directly without the need of a transformer (phase-to-phase). The analogue display is designed in CAT III and can be applied to many monitoring tasks of voltages in system control.

- Analogue voltmeter with change over
- 96 x 96 mm
- Panel installation

Panel Meter

Panel Meter PCE-EP29

£ 33.00

Price excl. VAT &. delivery
2 year Warranty

The panel meter or display is designed to measure simple three-phase-voltages. The panel meter is designed for alternating currents and can measure up to 500 V directly without the need of a transformer (phase-to-phase). The panel meter is designed in CAT III and can be applied to many monitoring tasks of voltages in system control.

- Analogue voltmeter with change over
- 96 x 96 mm
- Panel installation

Frequency Indicator

Frequency Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The frequency indicator is used for processing standardised signals. Depending on your specific needs, the frequency indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the frequency indicator is freely scalable, which increases its application possibilities.

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Panel Indicator

Panel Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The panel indicator is used for processing standardised signals. Depending on your specific needs, the panel indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the panel indicator is freely scalable, which increases its application possibilities.

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Panel Meter

Panel Meter PCE-N25S

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The panel meter is used for processing standardised signals. Depending on your specific needs, the panel meter can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the panel meter is freely scalable, which increases its application possibilities.

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Panel Meter

Panel Meter PCE-N25T

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The digital panel meter is used for processing signals coming from temperature sensors. Depending on your specific needs, the panel meter can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the panel meter is freely scalable, which increases its application possibilities.

- IP65 protected front
- For thermocouples and resistance thermometers
- Configuration via software
- 5-digit LED display

Power Indicator

Power Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The power indicator is used for processing standardised signals. Depending on your specific needs, the power indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the power indicator is freely scalable, which increases its application possibilities.

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Pressure Indicator

Pressure Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The pressure indicator is used for processing standardised signals. Depending on your specific needs, the pressure indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the pressure indicator is freely scalable, which increases its application possibilities.

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Norm / Process Indicator

Process Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The process indicator is used for processing standardised signals. Depending on your specific needs, the process indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the process indicator is freely scalable, which increases its application possibilities.

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Temperature Indicator

Temperature Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The temperature indicator is used for processing standardised signals. Depending on your specific needs, the temperature indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the temperature indicator is freely scalable, which increases its application possibilities.

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Temperature Indicator

Temperature Indicator PCE-N25T

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The digital temperature indicator is used for processing signals coming from temperature sensors. Depending on your specific needs, the temperature indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the temperature indicator is freely scalable, which increases its application possibilities.

- IP65 protected front
- For thermocouples and resistance thermometers
- Configuration via software
- 5-digit LED display

Voltage Indicator

Voltage Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The voltage indicator is used for processing standardised signals. Depending on your specific needs, the voltage indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the voltage indicator is freely scalable, which increases its application possibilities.

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Frequency Indicator

Frequency Indicator PCE-N24S

£ 83.00

Price excl. VAT &. delivery
2 year Warranty

The frequency indicator is used for the signal processing of 4 .. 20 mA. The frequency indicator has a 5-digit LED display to allow the user to read the directly measured current values.

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

Panel Indicator

Panel Indicator PCE-N24S

£ 83.00

Price excl. VAT &. delivery
2 year Warranty

The panel indicator is used for the signal processing of 4 .. 20 mA. The panel indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Panel Meter

Panel Meter PCE-N24S

£ 83.00

Price excl. VAT &. delivery
2 year Warranty

The panel meter is used for the signal processing of 4 .. 20 mA. The panel meter has a 5-digit LED display to allow the user to read the directly measured current values.

Power Indicator

Power Indicator PCE-N24S

£ 83.00

Price excl. VAT &. delivery
2 year Warranty

The power indicator is used for the signal processing of 4 .. 20 mA. The power indicator has a 5-digit LED display to allow the user to read the directly measured current values.