Control Systems

You will find a wide range of control systems to be used for many different applications from simple displays with different sizes up to complete regulators. Nowadays, control systems are essential instruments in modern production processes. The compact displays of these control systems enable quick and easy view of diverse physical magnitudes, such as temperature, pressure, revolutions and standard process signals which can be found in any automated process. Besides, modern regulators can solve quickly and effectively different control works.
Order no.: EE671-V
The EE671 air flow transmitter is a very compact air velocity sensor. The small design in combination with a thin-film sensor element makes it possible to use this versatile transducer, especially in mass applications. 

- Measuring range from 0 ... 20 m/s
- Temperature range -20 ... 60 °C / -4 ... 140 °F
- Immersion depth infinitely adjustable
- Different output signals selectable
- Cable or plug version
Manufacturer: E+E Elektronik GmbH
£ 131.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N27P
The power indicator PCE-N27P measures current up to 63 A directly. This makes it possible to connect the power display directly to the main distribution. The power indicator PCE-N27P measures all relevant network parameters such as current, voltage, power and frequency. The power indicator PCE-N27P is ideally suited for measurement purposes in order to comply with the ISO 50001 energy management standard.
  • Measures up to 63 A directly
  • Measuring about 1A / 5A transducer possible
  • Measurement of U, I, f, P
  • DIN rail
  • Manufacturer: PCE Instruments
    £ 178.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: 6000-1082

    Tank sensor with weight, with oil-resistant cable (approx 10 m  / 11 yard cable length)

     

    - Class B
    - Measuring range: -30 ... +150 °C / -22 ... +302 °F
    - Dimensions.: 80 x 4.0 mm / 3.15 x 0.15"
    - Response time: 8 sec.

    Manufacturer: Dostmann electronic GmbH
    £ 262.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-DMM 50

    The pressure indicator PCE-DMM 50 is suitable for stationary and mobile pressure measurement. The pressure indicator PCE-DMM 50 is used in mechanical and plant engineering, laboratory technology and environmental technology. This pressure indicator is battery powered. The measuring range of the pressure indicator reaches up to 600 bar.


    - Max. 600 bar / 8702 psi
    - Rotating display
    - For hygienic applications
    - Media: water, oxygen, fuels and oils
    - Print: absolute or relative (user selectable)
    - Diaphragm: Ceramics
    - Accuracy class: 0.2

    Manufacturer: PCE Instruments
    £ 311.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-DMM 51

    The pressure indicator PCE-DMM 51 is suitable for flush mounting hygiene. Thus, the indicator can be installed both in the food industry as well as in medical technology. The pressure indicator on its rotatable display pressures up to 400 bar, relative or absolute. The operating fluid of the pressure indicator has a food safe FDA approval.


    - Max. 400 bar / 5801 psi
    - Rotating display
    - For hygienic applications
    - Media: water, paints and coatings, gases, viscous and paste media
    - Pressure: relative
    - Diaphragm: stainless steel flush
    - Accuracy class: 0.2

    Manufacturer: PCE Instruments
    £ 311.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-DMM 50

    The pressure sensor PCE-DMM 50 is suitable for stationary and mobile pressure measurement. The pressure sensor PCE-DMM 50 is used in mechanical and plant engineering, laboratory technology and environmental technology. This pressure sensor is battery powered. The measuring range of the pressure sensor reaches up to 600 bar.


    - Max. 600 bar / 8702 psi
    - Rotating display
    - For hygienic applications
    - Media: water, oxygen, fuels and oils
    - Print: absolute or relative (user selectable)
    - Diaphragm: Ceramics
    - Accuracy class: 0.2

    Manufacturer: PCE Instruments
    £ 311.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-DMM 51

    The pressure sensor PCE-DMM 51 is suitable for flush mounting hygiene. Thus, the sensor can be installed both in the food industry as well as in medical technology. The pressure gauge shows on its rotatable display pressures up to 400 bar, relative or absolute. The operating fluid of the pressure sensor has a food safe FDA approval.


    - Max. 400 bar / 5801 psi
    - Rotating display
    - For hygienic applications
    - Media: water, paints and coatings, gases, viscous and paste media
    - Pressure: relative
    - Diaphragm: stainless steel flush
    - Accuracy class: 0.2

    Manufacturer: PCE Instruments
    £ 311.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-DMM 21

    The pressure indicator PCE-DMM 21 is suitable for flush sanitary installation. The pressure indicator may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure indicator has a food safe FDA approval. The flush mounting of the pressure indicator can be sterilized.


    - To 40 bar / 580 psi
    - Relative and absolute pressure measurement
    - Max-min function with reset
    - 2-line backlit display

    Manufacturer: PCE Instruments
    £ 436.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-DMM 21

    The pressure sensor PCE-DMM 21 is suitable for flush sanitary installation. The pressure sensor may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure sensor has a food safe FDA approval. The flush mounting of the pressure sensor can be sterilized.


    - To 40 bar / 580 psi
    - Relative and absolute pressure measurement
    - Max-min function with reset
    - 2-line backlit display

    Manufacturer: PCE Instruments
    £ 436.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-DMM 60

    The pressure indicator PCE-DMM 60 is a precision instrument of the highest standards. The pressure indicator is specifically designed for process monitoring and calibration. This pressure indicator is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.


    - Max. 400 bar / 5801 psi
    - Media: water, gases
    - Pressure type: Absolute / Relative
    - Diaphragm: stainless steel
    - Accuracy: 0.05 

    Manufacturer: PCE Instruments
    £ 734.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-DMM 60

    The pressure sensor PCE-DMM 60 is a precision instrument of the highest standards. The pressure sensor is specifically designed for process monitoring and calibration. This pressure sensor is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.


    - Max. 400 bar / 5801 psi
    - Media: water, gases
    - Pressure type: Absolute / Relative
    - Diaphragm: stainless steel
    - Accuracy: 0.05 

    Manufacturer: PCE Instruments
    £ 734.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-DC 9EV
    The electric vehicle EV tester is a measuring device for the precise determination of electrical currents. With a current clamp diameter of 25 mm and a measuring range of 0 … 1000 A AC/DC, the electric vehicle EV tester a large part of all measurement tasks. The electric vehicle EV tester can be used to monitor the wallbox of an electric vehicle on both the primary and secondary side.

    - Wallbox monitoring (primary/secondary)
    - Measuring range: 0 ... 1000 A AC/DC
    - Inductive current measurement
    - Direct current
    - Alternating current
    - Frequency
    - Inrush AC
    - AC low-pass filter (LPF)
    Manufacturer: PCE Instruments
    £ 155.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-DC 9EV-ICA
    The electric vehicle EV tester / EV test instrument is a measuring device for the precise determination of electrical currents. With a current clamp diameter of 25 mm and a measuring range of 0 … 1000 A AC/DC, the electric vehicle EV tester / EV test instrument covers a large part of all measurement tasks. The electric vehicle EV tester / EV test instrument can be used to monitor the wallbox of an electric vehicle on both the primary and secondary side.

    - Wallbox monitoring (primary/secondary)
    - Measuring range: 0 ... 1000 A AC/DC
    - Inductive current measurement
    - Direct current
    - Alternating current
    - Frequency
    - Inrush AC
    - AC low-pass filter (LPF)
    - incl. ISO Calibration Certificate
    Manufacturer: PCE Instruments
    £ 244.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-EVSE 300
    Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special EV Test Instrument are required to check the function, the protective devices and the insulation.

    - CP and PP simulation
    - Direct connection for wallboxes
    - Adapter with charging plugs Type 1 and Type 2
    - CP simulation (communication line) A, B, C, D, error
    Manufacturer: PCE Instruments
    £ 329.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-KD5

    PCE-KD5 is a universal input controller for the capturing, monitoring and controlling of process parameters. The universal input controller is based on a Linux operating system and has three slots that can be equipped with several different inputs and outputs. Depending on your specific needs, it is possible to equip the universal input controller with up to 48 analog or binary inputs, 24 thermocouple inputs, 12 resistance temperature detector (RTD) inputs, 16 relays / solid state relays (SSRs) or 8 analog outputs.


    - Up to 48 analog or binary inputs
    - Up to 24 thermocouple inputs
    - Up to 12 inputs for RTDs
    - Up to 16 relays / SSRs
    - Maximum sampling rate of 10 Hz
    - 1.5 GB internal memory

     **Not eligible for 30-day return policy due to custom configuration**

    Manufacturer: PCE Instruments
    £ 431.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-EVSE-KIT2
    The EV Test Instrument is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation.

    - Loop resistance L-N, L-PE and N-PE
    - Adjustable FI test current
    - Up to 1000 V terminal voltage
    - Low Ohm measurement
    - Direct connection for wallboxes
    - Adapter with charging plugs type 1 and type 2
    - PE conductor test
    - Integrated Schuko socket
    Manufacturer: PCE Instruments
    £ 930.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-EVSE-KIT2-ICA
    An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The EV Test Instrumentis specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument. 

    - Loop resistance L-N, L-PE and N-PE
    - Adjustable FI test current
    - Up to 1000 V terminal voltage
    - Low Ohm measurement
    - Direct connection for wallboxes
    - Adapter with charging plugs type 1 and type 2
    - PE conductor test
    - Integrated Schuko socket
    - incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)
    Manufacturer: PCE Instruments
    £ 1,117.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-SLT-KIT-N
    The sound sensor consists of a measuring microphone with a handle and a wall bracket on a 1.5 m / 4.9 ft cable, a noise transmitter and a digital display. The main area of application of the sound sensor is the continuous noise measurement and noise monitoring of factory halls, production rooms and at major events (discos, folk festivals, kart tracks, etc.).

    - Measuring range: 30...130dB(A)
    - Resolution: 0.1 dB
    - Accuracy: ±1.5 dB
    - Alarm relay: 5A/up to 240VAC
    - Input.: 110V or 220V/50Hz or 60HZ
    - Including class II sound calibrator
    Manufacturer: PCE Instruments
    £ 418.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-EP29

    The analogue indicator or display PCE-EP 29 is designed to measure simple three-phase-voltages. The analogue display PCE-EP 29 is designed for alternating currents and can measure up to 500 V directly without the need of a transformer (phase-to-phase). The analogue display is designed in CAT III and can be applied to many monitoring tasks of voltages in system control.


    - Analogue voltmeter with change over
    - 96 x 96 mm
    - Panel installation 

     

    Manufacturer: PCE Instruments
    £ 33.00

    Price excl. VAT &. delivery
    2 year Warranty

    Order no.: PCE-N15O
    The built-in display is a simple gauge to display pulses from speed sensors. This built-in display is able to display the pulses per revolution. 

    - Display range: 0 ... 9999
    - Input range: 0.1 Hz ... 1 kHz
    - Display range revolutions: 6 ... 60000 RPM
    - 4-digit LED display
    Manufacturer: PCE Instruments
    £ 53.00

    Price excl. VAT &. delivery
    2 year Warranty