ex. VAT, ex. delivery costs
The calibration certificate is issued especially for the customer and therefore is exempt from the right of return.
This force gage is a tensile / compressive force gage. This tensile / compressive force gage has an internal load cell. It is a portable traction / compression force gage that can be installed in a force measurement stand. The measuring range of this tensile and compressive force gage is up to 50 N / 11 lbs. So the meter is suitable for more precise tensile and compression tests.
Measuring range | 0.5 ... 50 N / 0.1 ... 11 lbs |
Resolution | 0.01 N / 0.002 lbs |
Pressure calibration | 0.1 Mpa |
Load cell | Integrated load cell with M6 connection |
Measuring range | 1 ... 100% of the full scale |
Measurement accuracy | ± 0.5 % |
Units | N, kg, lb |
Display | LCD |
Power supply | Internal battery, 12V / 1 A power adapter |
Operating temperature | 10 ... 30 °C / 50 ... 86°F |
Relative humidity | 15 ... 80 % relative humidity |
Weight | 1 kg / 2.2 lbs |
Working conditions | |
The device must not be near sources of vibration or corrosive substances |
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ISO re-calibration incl. certificate for force gauge over 50 kg / 500 N / 112 lbs. This is often required to comply with ISO/IEC 17025.
If your calibration certificate expires, you can easily return your meter for re-calibration.
We carry out the calibration and send you the device with a new calibration certificate.
Calibration certificates are issued specifically for the customer and are excluded from the right of return
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
Force test stand PCE-FTS50 with digital display is suitable for load cells with internal measuring cell, e.g. for the PCE-FM50, PCE-FM200, PCE-DFG N 200, PCE-DFG N 500, or PCE-PTR 200.
- with digital measuring distance display
- max. range of force 500 N
- maximum operating length of 236.36 mm / 9.30"
- the mounting plate ADP-UNI must be ordered at the same time!
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
Force test stand PCE-FTS50 with digital display is suitable for load cells with internal measuring cell, e.g. for the PCE-FM50, PCE-FM200, PCE-DFG N 200, PCE-DFG N 500, or PCE-PTR 200.
- with digital measuring distance display
- max. range of force 500 N
- maximum operating length of 236.36 mm / 9.30"
- the mounting plate ADP-UNI must be ordered at the same time!