PCE Instruments

Force Gauge / Digital Force Gauge

Order no.: PCE-FM 200
The force gauge PCE-FM 200 is a handheld device that measures up to 200 N. The force gauge can determine the units N, kg and lb. The force gauge is supplied with various adapters that have different shapes. The force gauge can measure both tensile and compressive forces.


- Measuring range: 2 ... 200 N / 0.2 ... 20  kg / 0.4 ... 45 lbs
- Measurement accuracy: ±0.5%
- Units: N, KG, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Downloadable evaluation software
Manufacturer: PCE Instruments
US$ 396.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-FM 500N
The PCE-FM 500N force gauge is a microprocessor controlled dynamometer with fast and accurate readout of tensile and compressive forces in N, Kg and lb. The display of the force gauge is easily readable by the large numbers. The force gauge is equipped with an internal load cell for tensile and compression tests.

- Measuring range: 5 ... 500 N / 1.1 ... 112 lbs
- Resolution: 0.1 N / 0.02 lbs
- Different shaped measuring adapters
- Evaluation via USB interface
- Device for mounting on test stands
Manufacturer: PCE Instruments
US$ 429.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-FM 50N
This force gauge is a tensile / compressive force gauge. This traction / compression force gauge has an internal load cell. It is a portable traction / compression force gauge that can be installed in a force measurement stand.

- Measuring range: 0.5 ... 50 N / 0.1 ... 11 lbs
- Resolution: 0.01 N / 0.002 lbs
- Evaluation via USB interface
- Different shaped measuring adapters
- Device for mounting on test stands
Manufacturer: PCE Instruments
US$ 429.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PTR 200N
The PCE-PTR 200N force gauge is a hand-held device up to 200 N. The PCE-PTR 200N force gauge can determine the units N, kg and lb. The PCE-PTR 200N force gauge comes with various shaped adapters. With the PCE-PTR 200N force gauge both tensile and compressive forces can be measured.

- Measuring range: 0 ... 200 N / 0 ... 45 lbs
- Measurement accuracy: ± 0.5%
- Units: n, kg, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Downloadable evaluation software
Manufacturer: PCE Instruments
US$ 496.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PFG 100
The force gauge is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 100 N
- Resolution: 0.02 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
Manufacturer: PCE Instruments
US$ 521.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PFG 20
The force gauge is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 20 N
- Resolution: 0.005 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
Manufacturer: PCE Instruments
US$ 521.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PFG 200
The PCE-PFG force gauge is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 200 N
- Resolution: 0.05 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
Manufacturer: PCE Instruments
US$ 521.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PFG 50
The PCE-PFG force gauge is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 50 N
- Resolution: 0.01 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
Manufacturer: PCE Instruments
US$ 521.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-FM 200-ICA
The force gauge PCE-FM 200-ICA is a handheld device that measures up to 200 N. The force gauge can determine the units N, kg and lb. The force gauge is supplied with various adapters that have different shapes. The force gauge can measure both tensile and compressive forces.

- Measuring range: 2 ... 200 N / 0.2 ... 20  kg / 0.4 ... 45 lbs
- Measurement accuracy: ±0.5%
- Units: N, KG, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Downloadable evaluation software
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
US$ 587.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-FM 500N-ICA
The PCE-FM 500N-ICA force gauge is a microprocessor controlled dynamometer with fast and accurate readout of tensile and compressive forces in N, Kg and lb. The display of the force gauge is easily readable by the large numbers. The force gauge is equipped with an internal load cell for tensile and compression tests.

- Measuring range: 5... 500 N / 1.1 ... 112 lbs
- Resolution: 0.1 N / 0.02 lbs
- Different shaped measuring adapters
- Evaluation via USB interface
- Device for mounting on test stands
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
US$ 614.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-FM 50N-ICA
This force gauge is a tensile / compressive force gauge. This traction / compression force gauge has an internal load cell. It is a portable traction / compression force gauge that can be installed in a force measurement stand.

- Measuring range: 0.5 ... 50 N / 0.1 ... 11 lbs
- Resolution: 0.01 N / 0.002 lbs
- Evaluation via USB interface
- Different shaped measuring adapters
- Device for mounting on test stands
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
US$ 619.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-N45F
The force indicator PCE-N45F is used to realize individual weighing solutions. The PCE-N45F force indicator can be used to connect load cells, force sensors, weighing platforms and other sensors that use strain gauges.

- Signal input range: 0 ... 10 mV / 0 ... 15 mV
- Supply voltage of the measuring cell: 5V
- Power supply: 24V DC
- Relay output
- Potential-free digital input
- Interface and analog output
Manufacturer: PCE Instruments
US$ 660.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-BTM 2000
The force gauge / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Sensor on gooseneck
Manufacturer: PCE Instruments
US$ 759.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-N50F
The force indicator PCE-N50F is suitable for panel mounting. This force indicator PCE-N50F can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force indicator PCE-N50F.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Manufacturer: PCE Instruments
US$ 808.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDM 3WI

The PCE-DDM 3WI Force Gauge is the ideal tool for measuring strong tensile forces. The PCE-DDM 3WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control / indicator

 

Manufacturer: PCE Instruments
US$ 884.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG N 10

The digital force gauge PCE-DFG N 10 for tensile force measurement and force measurement up to 10 N. The force gauge is a digital dynamometer for precise measurements with a resolution of 0.005 N.

- Measuring range: 0 ... 10 N, 0 ... 2.25 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips

Manufacturer: PCE Instruments
US$ 904.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG N 20
Digital force gauge PCE-DFG N 20 for tensile force measurement and force measurement up to 20 N. The digital dynamometer is for precise measurements with a resolution of 0.01 N.

- Measuring range: 0 ... 20 N, 0 ... 4.5 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
Manufacturer: PCE Instruments
US$ 904.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG N 200
Digital force gauge PCE-DFG N 200 for tensile force measurement and pressure force measurement up to 200 N. The digital dynamometer is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 200 N, 0 ... 44.96 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
Manufacturer: PCE Instruments
US$ 904.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG N 5
Force Gauge PCE-DFG N 5 for tensile force measurement and force measurement up to 5 N. This force gauge is a digital dynamometer for precise measurements with a resolution of 0.001 N.

- Measuring range: 0 ... 5 N, 0 ... 1.12 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
Manufacturer: PCE Instruments
US$ 904.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDM 5WI

The PCE-DDM 5WI Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 5WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 5,000 kg / 50 kN / 11,023 lbs
- Resolution: 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

Manufacturer: PCE Instruments
US$ 1,036.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer