PCE Instruments

Laboratory Technology

Order no.: PCE-AS1

PCE-AS1 is an air sampling meter used to assess microbiological pollution and monitor hygiene. Designed for use in hospitals, clean rooms, food, beverage, cosmetics, and pharmaceutical production facilities. The PCE-AS1 air sampler meets the latest requirements for devices used for airborne microbial analysis of bacterial and fungal counts. Rate is 100 lpm or 3.53 cfm with 300 micropores. **Optional ISO lab calibration listed under accessories**


- Accommodates manual adjustment of air volumes from 10 to 6000 liters
- Offers data storage for up to 99 parameters / 2000 measurement records
- Aids in compliance with HACCP, FDA FMSA, USP 797 and ISO 14698-1
- Runs off a rechargeable battery or AC power
- Supports standard Petri dishes of 90 mm / 3.5 in

 

Manufacturer: PCE Instruments
US$ 3,461.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 65

PCE-CT 65 is a thickness gauge that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.


- Measuring range of 0 ... 1350 µm / 0 ... 53 mils
- Accuracy of ±2.5 % ±2 µm for 0 ... 1000 µm / ±3.5 % for 1000 µm ... 1350 µm / ±2 % ±0.08 mils for 0 ... 39.3 mils / ±3.5 % for 39.3 mils ... 53.1 mils
- Saves up to 1500 measurements to memory

Manufacturer: PCE Instruments
US$ 210.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 65-ICA

PCE-CT 65 is a thickness gauge that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.


- Measuring range of 0 ... 1350 µm / 0 ... 53 mils
- Accuracy of ±2.5 % ±2 µm for 0 ... 1000 µm / ±3.5 % for 1000 µm ... 1350 µm / ±2 % ±0.08 mils for 0 ... 39.3 mils / ±3.5 % for 39.3 mils ... 53.1 mils
- Saves up to 1500 measurements to memory
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
US$ 370.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
US$ 463.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TG 300-ICA
The PCE-TG 300-ICA is a thickness gauge with special sensors for various applications. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness gauge. For damping or scattering materials such as plastic or cast a special sensor is available.

Measuring range:
PE: pulse-echo mode 0.65 ... 600 mm (steel)
EE: echo-echo mode 2.50 ... 60 mm
Accuracy:
± 0.04 mm H [mm] (<10 mm); ± 0.4% H [mm] (> 10 mm)
H refers to the material thickness of the workpiece
Resolution: 0.1 mm / 0.01 mm / 0.001 mm (adjustable)
Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
US$ 1,601.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 10
The thickness gauge is used for quick and easy measurement of ink layer thicknesses on metallic surfaces. Due to the measuring range and the possibility of measuring on ferrous and non-ferrous metals, the thickness gauge covers a large part of measuring tasks.

- Measuring range: 0 ... 2.20 mm
- Resolution: 0.01 mm
- Digital LCD display
- Automatic self-shutdown
- Adjustment with supplied standard possible
- For quick orientation measurement
Manufacturer: PCE Instruments
US$ 25.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MSR 50
The mini magnetic stirrer PCE-MSR 50 is suitable for applications in small laboratories. The mini magnetic stirrer can safely mix stirring quantities of 100 ... 1000 ml.

- Drive of the stirring points: Motorised
- Max. stirring quantity: 100 ... 1000 ml
- Adjustable speed: 0 ... 1600 rpm
- Stirring surface: Ø 88 mm
Manufacturer: PCE Instruments
US$ 43.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MSR 100

PCE-MSR 100 is a magnetic stirrer or magnetic stir plate commonly used in laboratories to ensure liquid samples are homogeneous in consistency and temperature. Proper mixing also boosts sensor response time, allowing measuring instruments to achieve stable readings more quickly.


- Maximum stirring volume: 2 Liters (L) ≈ 0.52 gallon
- Adjustable stirring speeds: 0 ... 1250 rpm
- Includes one magnetic stirrer bar 

 

Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 25FN

The Coating Thickness Gauge is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other paint thickness gauges, this paint thickness gauge does not have to differentiate between ferrous and non-ferrous metal.

- Measuring range:  0 ... 1500 µm
-  Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
- Measuring accuracy: ± (3% + 1 µm)
- Resolution: 0.1 µm in the measuring range 0 ... 100 µm
                      1 µm in the measuring range> 100 µm
Manufacturer: PCE Instruments
US$ 123.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-EMF 823

PCE-EMF 823 is a portable handheld single-axis magnetometer or electromagnetic radiation detector for measuring electromagnetic fields (EMFs). This user-friendly EMF meter is ideal for assessing risks associated with exposure to electromagnetic radiation emitted from electric power lines, home appliances and industrial devices.


- EMF measuring ranges: 20 micro Tesla (µT) / 200 µT / 2000 µT and 200 milli-Gauss (mG) / 2000 mG / 20000 mG
- EMF bandwidth: 30 Hz to 300 Hz
- Sampling time: Approx. 1 second

Manufacturer: PCE Instruments
US$ 154.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RCM 8
The Dust Monitor PCE-RCM 8 performs many measuring tasks. For example, the Dust Monitor can measure mass concentration, formaldehyde and TVOC. This Dust Monitor is specially designed for indoor measurement. 

- Formaldehyde in mg / m³
- Measurement of TVOC
- Temperature measurement
- Alarm function
- Mass concentration
Manufacturer: PCE Instruments
US$ 179.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 26FN
The PCE-CT 26FN thickness gauge can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN thickness gauge is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm / 0 ...  49.2 mils 
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-125

The PCE-125 series Ford Flow Cup Viscometer uses gravity to measure the flow rate of a liquid. Under ideal conditions, flow rate is proportional to kinematic viscosity. Thus, a Ford cup is used to determine the kinematic viscosity of fluids. The structure of the Flow Cup Viscometer is standardized according to ASTM D1200 (Ford). This Flow Cup Viscometer series features:
- Orifice diameters (Ø inside) of 2.5 mm, 3.4 mm, 4.1 mm, or 5.2 mm / 0.10 in, 0.13 in, 0.16 in, or 0.20 in
- Viscosity ranges of 25 ... 120, 49 ... 220, 70 ... 370 or 215 ... 1,413 cSt / mm²/s
- Flow times of 40 ... 100, 25 ... 105 or 20 ... 105 seconds (s)

Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-128

The PCE-128 ISO / ASTM viscometer or ISO / ASTM Flow Cup Viscometer uses gravity to measure the flow rate of a liquid. Under ideal conditions, flow rate is proportional to kinematic viscosity. Thus, an ISO / ASTM cup is used to determine the kinematic viscosity of fluids. The structure of an ISO / ASTM Flow Cup Viscometer is standardized according to BS EN ISO 2431 / ASTM D5125. Designed for use with Newtonian and near-Newtonian liquids, this Flow Cup Viscometer series features:
- Orifice diameters (Ø) of 3 mm, 4 mm, 5 mm, 6 mm, or 8 mm / 0.12 in, 0.16 in, 0.20 in, 0.24 in, or 0.31 in
- Viscosity ranges of 7 ... 42, 34 ... 135, 91 ... 326, 188 ... 684 or 600 ... 2,000 cSt / mm²/s
- Flow times of 25 ... 150 or 30 ... 100 seconds (s)

Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GM 50

The PCE-GM 50 is a digital gloss meter with high accuracy (±1.2 gloss points). The PCE-GM 50 gloss meter determines surface color and luster. Areas of application include: building inspection, flooring, production quality control and painted, polished or varnished surface evaluation. This gloss tester comes manufacturer calibrated (ISO certification is optional).


- Optical measurement angle: 60° degree angle
- Measurement range: 0 to 200 gloss units or gloss points
- Calibration standard included in delivery 

 

Manufacturer: PCE Instruments
US$ 197.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RCM 10

PCE-RCM 10 is a portable handheld Dust Monitor used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this Dust Monitor also measures air temperature and relative humidity (RH).


- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: -20 ... +70 °C / -4 ... +158 °F
- Humidity measuring range: 0 ... 100 % RH
- 2.4" full-color LCD with user-friendly graphics
- For indicative measurements

Manufacturer: PCE Instruments
US$ 204.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-G28

PCE-G28 is a portable, handheld magnetometer that detects electromagnetic fields (EMFs) and displays measurement results in milliGauss (mG) or microTesla (µT). This EMF radiation detector comes with an external 3-axis electromagnetic sensor (X, Y, Z direction).


- Measurement range: 0 ... 20000 mG / 0 ... 2000 µT
- Accuracy: ± 4% + 3 digits / ± 5% + 3 digits / ± 10% + 5 digits
- Resolution: 0.1 mG / 0.01 µT

Manufacturer: PCE Instruments
US$ 278.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RCM 15
The Dust Monitor PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the Dust Monitor measures the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

Measured quantity:
- Formaldehyde: 0 ... 1.999 mg / m³
- TVOC: 0 ... 9.999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function
Manufacturer: PCE Instruments
US$ 297.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 24FN
The PCE-CT 24FN Thickness Gauge allows you to quickly and accurately determine, for example, ink layer thicknesses. The mobile device enables thickness measurements on ferrous and non-ferrous metals. The measured value is displayed directly on the LC display.

- Measuring range: 0 ... 1500 μm
- Resolution: 0.1 μm (at <100 μm)
- Accuracy: ± 3% + 1 μm (at> 150 μm)
- Alarm when limit value exceeded
- Graphical representation of the measured values
Manufacturer: PCE Instruments
US$ 309.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 21BT

With this Coating Thickness Gauge, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Gauge has a measuring range of 1500 µm. This means that the Coating Thickness Gauge is used, for example, in a paint shop, for incoming goods inspection or for an expert.


- Measuring range up to 1500 µm
- Measurable substrates: Fe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

Manufacturer: PCE Instruments
US$ 312.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer