Laboratory Technology

Paint Thickness Tester PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate

US$ 1,356.00

ex. VAT, ex. delivery costs

The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Paint Thickness Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

US$ 1,363.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Paint Thickness Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,373.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Air Sampler PCE-MPC 25

US$ 1,394.00

ex. VAT, ex. delivery costs

The air sampler is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air sampler determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Paint Thickness Tester PCE-TG 150A HT-ICA incl. ISO-calibration certificate

US$ 1,422.00

ex. VAT, ex. delivery costs

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C
- incl. ISO-calibration certificate

Air Sampling Device PCE-MPC 30

US$ 1,445.00

ex. VAT, ex. delivery costs

This Air Sampling Device has many functions. With the Air Sampling Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.

Measurable particle sizes: PM 2.5 and PM 10
Measuring range: 0 … 2000 µg / m³
Resolution: 1 µg / m³
Particle counter, HCHO, temperature measurement
Dew point and wet bulb temperature

Dust Monitor PCE-MPC 30

US$ 1,445.00

ex. VAT, ex. delivery costs

This dust monitor has many functions. With the fine dust monitor it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.

Measurable particle sizes: PM 2.5 and PM 10
Measuring range: 0 … 2000 µg / m³
Resolution: 1 µg / m³
Particle counter, HCHO, temperature measurement
Dew point and wet bulb temperature

Magnetometer PCE-MFM 4000

US$ 1,453.00

ex. VAT, ex. delivery costs

The magnetometer is used in the laboratory and quality assurance to measure the strength of magnetic fields. The magnetometer is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

Tabletop device with 2 sensors
General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)
Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)
For static and changing magnetic fields
Highly accurate Transverse Hall sensor
Different units selectable (mG / µT)
Data storage on SD memory card

Turbidity Meter PCE-TUM 50

US$ 1,505.00

ex. VAT, ex. delivery costs

The turbidity meter PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the turbidity meter and to check the quality of drinking water and waste water.

- Measurement method: ISO 7027 (90°)
- Measuring ranges: 0 ... 2000 NTU
0 ... 500 EBC
0 ... 9999 ASBC
- 3 measuring units
Turbidity calibration up to 7 points