Laboratory Technology

US$ 813.00

ex. VAT, ex. delivery costs

The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

Measurement geometry: 60°
Measuring range up to 1000 GU
Measuring surface: Ø 4.5 mm
Data storage: 1245 measured values
Interface: Micro USB

Paint Gloss Tester PCE-GM 75-ICA Incl. ISO Calibration Certificate

US$ 818.00

ex. VAT, ex. delivery costs

The gloss meter has a measuring surface of Ø 4.5 mm. Thanks to this small measuring surface, the gloss meter enables measurements on particularly small surfaces. With a maximum inaccuracy of 1%, the gloss meter is a high-precision measuring instrument for fast and easy measurements on surfaces.

Measuring range up to 1000 GU
For measurements on small surfaces
Precise measurements thanks to high accuracy
Micro-USB interface for the PC connection
Data memory for later evaluations
Data memory: 1,245 measured values- Incl. ISO calibration certificate

Paint Gloss Tester PCE-PGM 60

US$ 826.00

ex. VAT, ex. delivery costs

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.

Measuring geometry: 60° degree angle
Measuring range: 0 … 300 GU
Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
Includes PC-compatible software for detailed analysis
Light source: D65
Wave length: 400-700 nm

Magnetometer PCE-MFM 3000-ICA Incl. ISO Calibration Certificate

US$ 839.00

ex. VAT, ex. delivery costs

PCE-MFM 3000 is a handheld magnetometer that detects both static (DC) permanent magnet (rare earth) magnetic and dynamic (AC) electromagnetic fields (EMFs) and displays measurement results in gauss (G) or milli Tesla (mT). This portable magnetometer comes with an external sensor and features an RS-232 port for downloading data to a PC.

Measurement range: 0 … 30,000 Gauss DC fields, 0 … 15,000 Gauss AC 50/60 Hz fields
Accuracy: ± 5%; + 20 digits (static) / + 10 digits (dynamic)
Resolution: 0.1 G / 0.01 mT
Measures both AC (50/60 Hz) and DC magnetic fields, permanent magnets are DC fields
Single axis Hall sensor (Transverse) with auto temp. compensation
Incl. ISO calibration certificate

Paint Thickness Tester PCE-CT 28-ICA incl. ISO Calibration Certificate

US$ 845.00

ex. VAT, ex. delivery costs

The PCE-CT 28 Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Thickness Gauge stands out due to its high range of measurement.

Measurement range: 0 … 1250 µm / 49.2 mils
Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm … 99.9 µm / 3.9 mils) 1 µm / 0.04 mils (above the range)
Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
Incl. ISO Calibration Certificate

Paint Gloss Tester PCE-RM 100

US$ 888.00

ex. VAT, ex. delivery costs

The gloss or opacity meter PCE-RM 100 is used to measure the reflection properties of surfaces related to opacity. The gloss meter PCE-RM 100 is used in tinting glass, film quality, opacity of paper, light shading and the hiding power of various paints, inks, and coatings.

Measuring range: 0 … 100 (0 is transparent and 100 is fully opaque)
Optical measurement angle: 45º degree angle
Measuring accuracy: ± 1
Resolution: 0.1
Battery operation
Interface and software

Paint Thickness Tester PCE-CT 80-FN0D5

US$ 913.00

ex. VAT, ex. delivery costs

The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Air Sampler PCE-MPC 15

US$ 924.00

ex. VAT, ex. delivery costs

The air sampler is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air sampler determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 2.5 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Paint Thickness Tester PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate

US$ 945.00

ex. VAT, ex. delivery costs

The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
incl. ISO Calibration Certificate

Magnetometer PCE-MFM 3500-ICA Incl. ISO Calibration Certificate

US$ 950.00

ex. VAT, ex. delivery costs

The magnetometer is a reliable measuring device for measuring the existing magnetic field. This magnetometer is suitable for measuring both static/permanent magnet (DC) and alternating magnetic (AC) fields.

Measuring range up to 30,000 G
DC Milli Tesla, DC Gauss, Transverse Probe
AC Milli Tesla, AC Gauss, frequency from 40 to 500 Hz
Temperature sensor
Switchable AC or DC measurement
Memory: Manual / Automatic
Incl. ISO calibration certificate

Paint Gloss Tester PCE-GM 80-ICA incl. ISO Calibration Certificate

US$ 999.00

ex. VAT, ex. delivery costs

Measurement geometry: 60°
Measuring range up to 1000 GU
Measuring surface: Ø 4.5 mm
Data storage: 1245 measured values
Interface: Micro USB
Incl. ISO calibration certificate

Paint Gloss Tester PCE-PGM 60-ICA incl. ISO calibration certificate

US$ 1,011.00

ex. VAT, ex. delivery costs

Measuring geometry: 60° degree angle
Measuring range: 0 … 300 GU
Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
Light source: D65
Wave length: 400-700 nm
Incl. ISO calibration certificate
Includes PC-compatible software for detailed analysis

Paint Thickness Tester PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,020.00

ex. VAT, ex. delivery costs

The paint thickness tester can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the paint thickness tester.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Magnetometer PCE-MFM 2400

US$ 1,039.00

ex. VAT, ex. delivery costs

With a measuring range of 2,400 mT, the magnetometer covers a wide range of measuring tasks. The magnetometer has an accuracy of 1%. This makes the magnetometer a very precise measuring device.

Measuring range up to 24,000 G and 2,400 mT
Measuring direction: transverse
for measuring static magnetic fields
Transverse Hall sensor, cable length approx. 3.3 ft., 1 m

Magnetometer PCE-MFM 2400+

US$ 1,039.00

ex. VAT, ex. delivery costs

With a measuring range of 2,400 mT, the magnetometer covers a wide range of measuring tasks. The magnetometer has an accuracy of 1%. This makes the magnetometer a very precise measuring device.

Measuring range up to 24,000 G and 2,400 mT
Measuring direction: axial
for measuring static magnetic fields
Axial Hall sensor, cable length approx. 2 m / 6.6 ft

Air Sampler PCE-MPC 20

US$ 1,105.00

ex. VAT, ex. delivery costs

The air sampler PCE-MPC 20 is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the particle collector are 0.3, 2.5 and 10 μm.

20% off discount only through November 30!

Measurable particle sizes: PM2.5 / PM10
Measuring range Mass concentration: 0 … 2000 μg / m³
Measurable particle sizes: 0.3, 2.5 and 10 μm
Display with graphic real-time diagram
Data memory up to 5000 data sets

Dust Monitor PCE-MPC 20

US$ 1,105.00

ex. VAT, ex. delivery costs

The dust monitor is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the dust monitor are 0.3, 2.5 and 10 μm.

20% off discount only through November 30!

Measurable particle sizes: PM2.5 / PM10
Measuring range Mass concentration: 0 … 2000 μg / m³
Measurable particle sizes: 0.3, 2.5 and 10 μm
Display with graphic real-time diagram
Data memory up to 5000 data sets

Paint Thickness Tester PCE-CT 80-FN1D5

US$ 1,132.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"