Laboratory Technology

PCE-TUM 20 is a portable handheld turbidity meter or turbidimeter for water quality analysis. This turbidity measuring device is equipped with a large LCD screen and user-friendly keyboard. The turbidity meter features two automatically switching measuring ranges between 0 ... 50 NTU and 50 ... 1000 NTU for increased accuracy.

- 0 ... 1000 NTU turbidity measuring range
- Infrared LED light source
- Calibration references included

PCE-MFM 3000 is a handheld magnetometer that detects both static (DC) permanent magnet (rare earth) magnetic and dynamic (AC) electromagnetic fields (EMFs) and displays measurement results in gauss (G) or milli Tesla (mT). This portable magnetic field measuring device comes with an external sensor and features an RS-232 port for downloading data to a PC.

- Measurement range: 0 ... 30,000 Gauss DC fields, 0 ... 15,000 Gauss AC 50/60 Hz fields
- Accuracy: ± 5%; + 20 digits (static) / + 10 digits (dynamic)
- Resolution: 0.1 G / 0.01 mT
- Measures both AC (50/60 Hz) and DC magnetic fields, permanent magnets are DC fields 
- Single axis Hall sensor (Transverse) with auto temp. compensation
- Incl. ISO calibration certificate

The PCE-CT 28 Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Thickness Gauge stands out due to its high range of measurement.

- Measurement range: 0 ... 1250 µm / 49.2 mils
- Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm ... 99.9 µm / 3.9 mils)
  1 µm / 0.04 mils (above the range)
- Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
- Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
- Incl. ISO Calibration Certificate

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB

PCE-MSR 400 is a multi-position magnetic stirrer with four stirring points for stirring up to four beakers simultaneously. This multi-beaker laboratory stir plate uses the induction method for quiet stirring. The flat stainless steel design is both low profile and easy to clean.

- Adjustable speed: 15 ... 1200 rpm
- Timer
- Stir plate made of stainless steel
- IP65 ingress protection rating
- 4 stirring points

PCE-MPC 10 is a portable handheld air sampler or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).

- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- 2" full-color LCD with user-friendly graphics
- Integrated data logger with adjustable sampling time
- Internal memory stores up to 5000 date-and-time-stamped data sets

PCE-MPC 10 is a portable handheld Dust Monitor used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this Dust Monitor also measures air temperature and relative humidity (RH).

- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- 2" full-color LCD with user-friendly graphics
- Integrated data logger with adjustable sampling time
- Internal memory stores up to 5000 date-and-time-stamped data sets

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.

- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Includes PC-compatible software for detailed analysis
- Light source: D65
- Wave length: 400-700 nm

- Measuring range up to 1000 GU
- For measurements on small surfaces
- Precise measurements thanks to high accuracy
- Micro-USB interface for the PC connection
- Data memory for later evaluations
- Data memory: 1,245 measured values
- Incl. ISO calibration certificate

- Measuring range up to 30,000 G
- DC Milli Tesla, DC Gauss, Transverse Probe
- AC Milli Tesla, AC Gauss, frequency from 40 to 500 Hz
- Temperature sensor
- Switchable AC or DC measurement
- Memory: Manual / Automatic
- Incl. ISO calibration certificate

- Measuring range: 0 ... 100 (0 is transparent and 100 is fully opaque)
- Optical measurement angle: 45º degree angle
- Measuring accuracy: ± 1
- Resolution: 0.1
- Battery operation
- Interface and software

The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.

- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate
- Includes PC-compatible software for detailed analysis

- Range : 0 ... 200 gloss units / highlights
- Accuracy: ± 1 gloss units
- Repeatability: ± 0.5 gloss units
- Optical angle: 20°, 45°, 75°
- For medium and high gloss
- Measurements on textiles and paper possible

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results

The Ultrasonic Thickness Gauge PCE-TG120 is a very easy-to-use wall thickness gauge for all materials. This ultrasonic thickness gauge works to accurately measure the material thickness / wall thickness with ultrasound.

- Measurement range: 1 mm ... 30 mm / 0.04 in ... 1.18 in (displays in mm only)
- Resolution: 0.1 mm / 3.94 mil
- Accuracy: ± 0.1 mm 
- Integrated test block

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets