Laboratory Technology

Paint Thickness Tester PCE-CT 26FN
US$ 272.00
ex. VAT, ex. delivery costs
The PCE-CT 26FN thickness gauge can measure non-destructive coatings (paints, plastics …) on steel / iron and non-ferrous metals. The PCE-CT 26FN thickness gauge is ideally suited to immediately detect, for example, accident damage to the vehicle. 

  • Measuring range: 0 … 1250 μm / 0 …  49.2 mils 
  • Resolution: 1 μm / 0.039 mils
  • Accuracy: ± (3% + 2 μm / 0.079 mils)
  • Wear-resistant sensor
  • V-groove for measurement on pipes
DIN Flow Cup Meter PCE-127/4
US$ 286.00
ex. VAT, ex. delivery costs
DIN flow cup meters are viscosity meters to determine the viscosity of liquids. The flow cup meters are often used in industry and research laboratories.

  • Capacity: 100 ml
  • Ø nozzle: 4 mm (± 0.02 mm)
  • Material: anodized aluminum
  • Standard: DIN 53211
Dust Monitor PCE-RCM 10
US$ 286.00
ex. VAT, ex. delivery costs

The PCE-RCM 10 is a portable handheld dust monitor used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this dust monitor also measures air temperature and relative humidity (RH).


  • PM channels: PM 2.5, PM 10
  • Particle sizes (in micrometers): 2.5 µm, 10 µm
  • Temp. measuring range: -20 … +70 °C / -4 … +158 °F
  • Humidity measuring range: 0 … 100 % RH
  • 2.4" full-color LCD with user-friendly graphics
  • For indicative measurements

Water Analyser PCE-DRD 1
US$ 319.00
ex. VAT, ex. delivery costs
Our Water Analyser is a waterproof device and determines the percentage of sodium chloride in water with a measurement range of 0 to 28 % NaCl. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. The Water Analyser can measure various parameters such as salinity (%NaCl) and refractive index quickly and accurately with just four to five drops of the sample.

  • salinity 0 ... 28 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.3330 ... 1.4200 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Water Analyser PCE-DRD 2
US$ 319.00
ex. VAT, ex. delivery costs
Our Water Analyser determines the percentage of sodium chloride in water with a measurement range of 0 to 280 ‰ NaCl. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. The Water Analyser can measure various parameters such as salinity (%NaCl) and refractive index quickly and accurately with just four to five drops of the sample.

  • salinity: 0 ... 280 ‰
  • resolution: 0.1 ‰
  • accuracy: ±2 ‰
  • refractive index: 1.3330 ... 1.4200 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Water Analyser PCE-DRD 3
US$ 319.00
ex. VAT, ex. delivery costs
ISO Calibration
Our Water Analyser determines the percentage of sodium chloride in water with a measurement range of 0 to 28.5 % NaCl. The measurement result and the temperature of the sample are shown in two lines on the LCD of the Water Analyser. Our Water Analyser can measure various parameters such as salinity (%NaCl) and the refractive index quickly and accurately with just four to five drops of the sample.

  • salinity NaCl: 0 ... 28,5 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.3330 ... 1.4200 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Dust Monitor PCE-RCM 16
US$ 379.00
ex. VAT, ex. delivery costs
The dust monitor is ideal for monitoring the air quality in homes, businesses or public buildings where people are staying. The 4.3-inch TFT display on the dust monitor is dimensioned so that all measured values ​​can be read directly.

20% off discount only through November 30!

Metrics
  • TVOC: 0.000 … 9.999 mg / m³
  • PM1, PM 2.5, PM10: 0 … 999 μg / m³
  • Temperature: 0 … 50°C / 32 … 122°F
  • Humidity: 20 … 90% rh
  • CO2: 0 … 5000 ppm
Water Analyser PCE-DRF 2
US$ 385.00
ex. VAT, ex. delivery costs
Our Water Analyser determines the percentage of acetic acid in fluids with a measurement range of 0 to 75 %. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. Our Water Analyser can measure various parameters such as percentage and refractive index quickly and accurately with just four to five drops of the sample.

  • acetic acid: 0 ... 75 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.32700 ... 1.37700 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Water Analyser PCE-DRF 3
US$ 385.00
ex. VAT, ex. delivery costs
Our Water Analyser determines the percentage of calcium chloride in water with a measurement range of 0 to 41 %. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. The Water Analyser can measure various parameters such as percentage and refractive index quickly and accurately with just four to five drops of the sample.

  • calcium chloride 0 ... 41 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.3330 ... 1.4200 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Water Analyser PCE-DRF 4
US$ 385.00
ex. VAT, ex. delivery costs
Our Water Analyser determines the percentage of glycerin in aqueous media with a measurement range of 0 to 100 %. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. The Water Analyser can measure various parameters such as percentage and refractive index quickly and accurately with just four to five drops of the sample.

  • glycerin 0 ... 100 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.3330 ... 1.4740 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Water Analyser PCE-DRF 5
US$ 385.00
ex. VAT, ex. delivery costs
Our Water Analyser determines the percentage of hydrogen peroxide in water with a measurement range of 0 to 61 %. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. Our Water Analyser can measure various parameters such as percentage and refractive index quickly and accurately with just four to five drops of the sample.

  • hydrogen peroxide 0 ... 61 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.3330 ... 1.4650 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Water Analyser PCE-DRF 6
US$ 385.00
ex. VAT, ex. delivery costs
Our Water Analyser determines the percentage of potassium carbonate in aqueous media with a measurement range of 0 to 51 %. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. The Water Analyser can measure various parameters such as percentage and refractive index quickly and accurately with just four to five drops of the sample.

  • potassium carbonate 0 ... 51 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.3330 ... 1.4650 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Water Analyser PCE-DRF 7
US$ 385.00
ex. VAT, ex. delivery costs
Our Water Analyser determines the percentage of potassium hydroxide in aqueous media with a measurement range of 0 to 21 %. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. The Water Analyser can measure various parameters such as percentage and refractive index quickly and accurately with just four to five drops of the sample.

  • potassium hydroxide 0 ... 21 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.3330 ... 1.3744 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Water Analyser PCE-DRF 8
US$ 385.00
ex. VAT, ex. delivery costs
Our Water Analyser determines the percentage of lithium hydroxide in aqueous media with a measurement range of 0 to 15 %. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. The Water Analyser can measure various parameters such as percentage and refractive index quickly and accurately with just four to five drops of the sample.

  • lithium hydroxide 0 ... 15 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.3330 ... 1.46410 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Water Analyser PCE-DRF 9
US$ 385.00
ex. VAT, ex. delivery costs
ISO Calibration
Our Water Analyser determines the percentage of methanol in water with a measurement range of 0 to 46 %. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. The Water Analyser can measure various parameters such as percentage and refractive index quickly and accurately with just four to five drops of the sample.

  • methanol 0 ... 46 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.3330 ... 1.3290 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Water Analyser PCE-DRG 1
US$ 385.00
ex. VAT, ex. delivery costs
Our Water Analyser determines the percentage of magnesium chloride in aqueous media with a measurement range of 0 to 35 %. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. The Water Analyser can measure various parameters such as percentage and refractive index quickly and accurately with just four to five drops of the sample.

  • magnesium chloride 0 ... 35 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.3330 ... 1.4650 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Water Analyser PCE-DRG 10
US$ 385.00
ex. VAT, ex. delivery costs
Our Water Analyser determines the percentage of sodium hydroxide in aqueous media with a measurement range of 0 to 55 %. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. Our Water Analyser can measure various parameters such as percentage and refractive index quickly and accurately with just four to five drops of the sample.

  • sodium hydroxide 0 ... 55 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.32500 ... 1.44100 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism
Water Analyser PCE-DRG 2
US$ 385.00
ex. VAT, ex. delivery costs
Our Water Analyser determines the percentage sodium nitrate in aqueous media with a measurement range of 0 to 41 %. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Water Analyser. The Water Analyser can measure various parameters such as percentage and refractive index quickly and accurately with just four to five drops of the sample.

  • sodium nitrate 0 ... 41 %
  • resolution: 0.1 %
  • accuracy: ±0.2 %
  • refractive index: 1.312700 ... 1.38700 nD
  • quick and accurate measurement in approx. 1 s
  • easy to use (1-key operation)
  • small sample volume
  • automatic temperature compensation
  • stainless steel sample holder with glass prism