Control Systems

The compact pressure sensor PCE-DMM 10 is characterized by its rotatable housing and the display and the battery supply. Thus, the pressure sensor PCE-DMM 10 is ideal for mobile applications, such as test beds.

- Max. 250 bar / 3626 psi
- Rotatable 4.5 digit display
- Battery operation
- Media: gases, fuels and oils
- Pressure: relative
- Diaphragm: Ceramic
- Accuracy class: 0.5

- Measuring range: 0 ... 1450 psi, 0 ... 100 bar
- Resolution: 0.145 psi, 0.01 bar
- Scaled bar graph
- Measurable media: gases, water

- Measuring range: 0 ... 87 psi, 0 ... 6 bar
- Resolution: 0.0145 psi, 0.001
- Scaled bar graph
- Measurable media: gases, water

The pressure transmitter PCE-DMU 10 can be used for gases, water as well as fuels and oils. The pressure transmitter can be used for relative and absolute pressure measurements.

 

- max. 400 Bar
- Media: gases, water as well as fuels and oil
- Output: 4 ... 20 mA / 0 ... 10 V (selectable)
- Pressure type: Absolute or Relative (selectable)
- Membrane: ceramic
- Accuracy: 0.5 % FSO

- Interface: RS 485 Modbus RTU Master
- Number of slave devices / registers: 10
- Baud rate individually adjustable
- Further power supply area

- Power supply: 85 ... 265V AC / DC
- Input signal: mV / V for force and weighing sensors
- Display: 6 digits, red
- Digit height : 14 mm

- Power supply: 11 ... 60V DC / 24/48V AC
- Input signal: mV / V for force and weighing sensors
- Display: 6 digits, red
- Digit height : 14 mm

The universal controller PCE-RE82 can be used to control temperature or other physical variables such as pressure, humidity or level. The analog input of this universal controller can process the various common signals and is freely scalable. Using the digital inputs, for example, a PLC control can influence the universal controller. The universal controller offers four outputs, which can be assigned different tasks depending on the application. In addition to the control function, they can also be used as signal or alarm outputs. Due to two internal control loops, each control parameter, a three-point control can also be implemented.

- With seven-segment and bargraph displays
- Automatic search for the optimal control parameters
- 3-point control possible

 

With the temperature sensor PCE-IR 50, surface temperatures can measured quickly and easily. The measuring range of the temperature sensor is 0 ...500 °C / 32 ... 932°F. The measured temperature is output as a 4 ... 20-mA standard signal which means that the temperature sensor can be easily integrated into different monitoring systems, including those in different production processes or food storage as well as the monitoring of electronic systems.

- Measurement range: 0 ... 500°C / 32 ... 932°F
- Accuracy: ± 1.5°C or ± 1%
- Optical resolution: 15:1
- Output signal: 4 ... 20-mA standard signal
- For fixed installation (mounting bracket incl.)

With the Thermo Transducer PCE-IR 50, surface temperatures can measured quickly and easily. The measuring range of the thermo transducer is 0 ... 500 °C / 32 ... 932 °F. The measured temperature is output as a 4 ... 20-mA standard signal which means that the thermo transducer can be easily integrated into different monitoring systems, including those in different production processes or food storage as well as the monitoring of electronic systems.

- Measurement range: 0 ... 500 °C / 32 ... 932 °F
- Accuracy: ± 1.5 °C or ± 1 %
- Optical resolution: 15:1
- Output signal: 4 ... 20-mA standard signal
- For fixed installation (mounting bracket incl.)

The Laboratory Switching Power Supply has a voltage output of up to 500 V. This means that even consumers who need a higher voltage can be checked with the laboratory switching power supply. This enables transformers to be checked for their winding ratio using the laboratory switched-mode power supply. In order to minimize the risk of electric shock, the connection side of the laboratory switching power supply is equipped with 4 mm safety sockets. - 4 individually adjustable channels - Output voltage up to 500 V. - Handle for mobile transportation - self-regulating active cooling - 4 mm safety banana sockets - Protective conductor connection on the connection side

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

The power indicator PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power indicator PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power display can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.

- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus 

 

Note: This item must be configured before ordering!

The pressure indicator PCE-DMM 11 is distinguished by the long battery life of 1800h. The rotatable housing and display completes the functionality of the manometer. Thus, the pressure indicator PCE-DMM 11 is ideal for mobile applications, such as test beds.

- Up to 600 bar / 8702 psi
- Relative pressure
- Revolving 4.5 digit display
- Max-Min function
- Different units 

The pressure sensor PCE-DMM 11 is distinguished by the long battery life of 1800h. The rotatable housing and display completes the functionality of the manometer. Thus, the pressure sensor PCE-DMM 11 is ideal for mobile applications, such as test beds.

- Up to 600 bar / 8702 psi
- Relative pressure
- Revolving 4.5 digit display
- Max-Min function
- Different units 

Measurement functions:
- Process flow
- mV
- Process voltage
- Resistance
- Autotune PID
- Memory for several PID parameters
- RS485 Modbus interface

Measurement functions:
- Process flow
- mV
- Process voltage
- Resistance
- Autotune PID
- Memory for several PID parameters
- RS485 Modbus interface

Measurement functions:
- Process flow
- mV
- Process voltage
- Resistance
- Autotune PID
- Memory for several PID parameters
- RS485 Modbus interface
- 2 measuring inputs

Measurement functions:
- Process flow
- mV
- Process voltage
- Resistance
- Autotune PID
- Memory for several PID parameters
- RS485 Modbus interface
- 2 measuring inputs

- Max. ± 0.5% accuracy
- Optional display
- Switching outputs
- Radiated output signal