Electric Vehicle EV Tester / EV Test Instrument

EV Test Instrument PCE-EVSE 300
US$ 430.00
ex. VAT, ex. delivery costs
Topseller
Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special EV Test Instrument are required to check the function, the protective devices and the insulation.

  • CP and PP simulation
  • Direct connection for wallboxes
  • Adapter with charging plugs Type 1 and Type 2
  • CP simulation (communication line) A, B, C, D, error
EV Test Instrument PCE-EVSE 310
US$ 439.00
ex. VAT, ex. delivery costs
Topseller
The EV test instrument is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

  • PE pre-test
  • Proximity Pilot PP / Control Pilot CP
  • Simulation CP fault "E" / PE fault
  • Mains socket for measuring purposes
  • Safety measuring sockets
  • Optional adapter to type 1
EV Test Instrument PCE-EVSE 310+
US$ 562.00
ex. VAT, ex. delivery costs
Topseller
The EV test instrument is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

- PE pre-test
- Proximity-Pilot PP / Control-Pilot CP
- Simulation CP error "E" / PE error
- Mains socket for measuring purposes
- Safety measuring sockets
incl. type 2 plug and adapter to type 1
Electric Vehicle EV Tester / EV Test Instrument PCE-EVSE-KIT2
US$ 1,623.00
ex. VAT, ex. delivery costs
The EV Test Instrument is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation.

  • Loop resistance L-N, L-PE and N-PE
  • Adjustable FI test current
  • Up to 1000 V terminal voltage
  • Low Ohm measurement
  • Direct connection for wallboxes
  • Adapter with charging plugs type 1 and type 2
  • PE conductor test
  • Integrated Schuko socket
Electric Vehicle EV Tester / EV Test PCE-EVSE-KIT2-ICA incl ISO Cal Certificate
US$ 1,944.00
ex. VAT, ex. delivery costs
ISO Calibration
An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The EV Test Instrumentis specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument. 

  • Loop resistance L-N, L-PE and N-PE
  • Adjustable FI test current
  • Up to 1000 V terminal voltage
  • Low Ohm measurement
  • Direct connection for wallboxes
  • Adapter with charging plugs type 1 and type 2
  • PE conductor test
  • Integrated Schuko socket
  • incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)
Voltage Indicator PCE-N24H
US$ 111.00
ex. VAT, ex. delivery costs
The digital voltage indicator is is used to show DC voltage parameters. The voltage indicator can measure and display direct current, direct voltage. The possibility of freely scaling the input signal allows a very versatile use of this voltage indicator.

  • Power supply:   230 V, 110 V, 24 V, 20 … 40 V AC/DC,   85 … 253 V AC/DC (selectable)
  • Input signal: ±100 V DC, ±250 V DC,   ± 400 V DC, 1 A DC, 5 A DC (selectable)
  • Display: 4 digits, red
  • Digit height: 20 mm / 0.78"Note: This item must be configured before ordering!
Power Indicator PCE-N24S
US$ 115.00
ex. VAT, ex. delivery costs

The power indicator is used for the signal processing of 4 .. 20 mA. The power indicator has a 5-digit LED display to allow the user to read the directly measured current values.


  • Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
  • Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
  • Display: 4 digits, red
  • Digit height: 20 mm

Power Display Panel for System Integration PCE-N25Z
US$ 117.00
ex. VAT, ex. delivery costs

The digital indicator PCE-N25Z can be used for processing different AC input signals. Depending on your specific needs, the digital indicator can be ordered with different inputs, like 100 V AC, 250 V AC, 400 V AC, 1 A AC, 5 A AC and 20...50 Hz. The input signal of the digital indicator is freely scalable, which increases its application possibilities.


- IP65 protected on the front
- 6 different inputs available
- Configuration via software
- 5-digit LED display

 

Thermocouple or PT100 Display Panel for System Integration PCE-N25T
US$ 117.00
ex. VAT, ex. delivery costs

The digital indicator PCE-N25T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.


- IP65 protected front
- For thermocouples and resistance thermometers
- Configuration via software
- 5-digit LED display

 

Power Display Panel for System Integration PCE-N24Z
US$ 123.00
ex. VAT, ex. delivery costs

The digital indicator panel display PCE N24Z is used to represent AC parameters. The panel display can measure and display alternating current, AC voltage or frequency. The ability to scale the input signal is free, allowing a very wide range of applications.


- IP 65 in the front
- Measuring speed: > 0.5 sec.
- 4-digit LED screen (20 mm height)