Control Systems

You will find a wide range of control systems to be used for many different applications from simple displays with different sizes up to complete regulators. Nowadays, control systems are essential instruments in modern production processes. The compact displays of these control systems enable quick and easy view of diverse physical magnitudes, such as temperature, pressure, revolutions and standard process signals which can be found in any automated process. Besides, modern regulators can solve quickly and effectively different control works.
Panel Indicator PCE-DPD-Cx Series
US$ 343.00
ex. VAT, ex. delivery costs
This digital panel indicator with stopwatch with start, stop and reset input functions. The digital panel indicator has a size of 96 x 48 mm and displays the values ​​on a 6-digit red LED display of 14 mm. It has different reading formats available in both decimal and sexagesimal format, with a configurable preset value and different counting functions.

  • Digital panel indicator with stopwatch function
  • LED display 6 digits red 14 mm color
  • Decimal or sexagesimal reading format
  • Functions: Start / Stop / Reset inputs, On power-up, Trigger sense, …
pH Controller PCE-PHC 10
US$ 360.00
ex. VAT, ex. delivery costs
The process controller / pH controller  measures and regulates the pH of various substances and is able to influence the pH value. The pH controller is a classic 2-point controller, depending on the application, the controller can be used to influence the liquid in the direction of alkaline or acidic. 

  • Measuring range: 0 … 14 pH
  • Measuring range: 0 … 65°C / 32 … 149°F
  • Large LED display
  • 2 control relays for pH and temperature
  • Connection via BNC and screw contacts
  • For water treatment, electroplating …
  • Sensors selectable
pH Value Controller PCE-PHC 10
US$ 360.00
ex. VAT, ex. delivery costs
The pH value controller PCE-PHC 10 measures and regulates the pH of various substances and is able to influence the pH value. The pH value controller PCE-PHC 10 is a classic 2-point controller, depending on the application, the controller can be used to influence the liquid in the direction of alkaline or acidic. 

  • Measuring range: 0 … 14 pH
  • Measuring range: 0 … 65°C / 32 … 149°F
  • Large LED display
  • 2 control relays for pH and temperature
  • Connection via BNC and screw contacts
  • For water treatment, electroplating …
  • Sensors selectable
Vibration Sensor Switch PCE-VS10
US$ 404.00
ex. VAT, ex. delivery costs

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.


  • Frequency range (max.): 0.1 Hz …10 kHz
  • Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
  • Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
  • Mounting: M8 stud bolt

Force and Weight Indicator PCE-DPD-F1
US$ 434.00
ex. VAT, ex. delivery costs
The built-in display is used to indicate the force and weight, which is detected by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the force and weight indicator makes it possible to display the correct weight in mV / V based on the set sensitivity. The force and weight indicator shows the measured values ​​on a 6-digit LED display. 

  • Power supply: 85 … 265V AC / DC
  • Input signal: mV / V for force and weighing sensors
  • Display: 6 digits, red
  • Digit height : 14 mm
Panel Meter PCE-DPD-F1
US$ 434.00
ex. VAT, ex. delivery costs
The built-in display is used to indicate the force and weight, which is detected by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the panel meter makes it possible to display the correct weight in mV / V based on the set sensitivity. The panel meter shows the measured values ​​on a 6-digit LED display. 

  • Power supply: 85 … 265V AC / DC
  • Input signal: mV / V for force and weighing sensors
  • Display: 6 digits, red
  • Digit height : 14 mm
Pressure Transmitter PCE-DMU 10
US$ 438.00
ex. VAT, ex. delivery costs

The pressure transmitter PCE-DMU 10 can be used for gases, water as well as fuels and oils. The pressure transmitter can be used for relative and absolute pressure measurements.

  • max. 400 Bar
  • Media: gases, water as well as fuels and oil
  • Output: 4 … 20 mA / 0 … 10 V (selectable)
  • Pressure type: Absolute or Relative (selectable)
  • Membrane: ceramic
  • Accuracy: 0.5 % FSO

Pressure Indicator PCE-DPG 10
US$ 442.00
ex. VAT, ex. delivery costs
The pressure indicator is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure indicator is versatile.

  • Measuring range: 0 … 145 psi, 0 …10 bar
  • Resolution: 0.145 psi, 0.01 bar
  • Scaled bar graph
  • Measurable media: gases, water
Pressure Indicator PCE-DPG 100
US$ 442.00
ex. VAT, ex. delivery costs
The pressure indicator is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure indicator is versatile.

  • Measuring range: 0 … 1450 psi, 0 … 100 bar
  • Resolution: 0.145 psi, 0.01 bar
  • Scaled bar graph
  • Measurable media: gases, water