Price excl. VAT &. delivery
2 year Warranty
Extending rod ER-55 for material tester PCE-RT 1200/2000/2300. For extending sensors reach 50 mm. **Just 2 extensions permissible per application**
The detachable motorized sensor is connected by a cable to the main unit of the roughness gauge. The diamond stylus is installed in the motorized sensor. This presses with a maximum force of 4 mN on the surface from which the roughness is to be measured. The material tester measures according to the valid ISO, ANSI and JIS standards for roughness measuring instruments.
Free software download for remote test control and data save to Windows PC.Measuring range | Rz: 0.02 μm ... 320 μm; Ra, Rq: 0.005 μm ... 32 μm, Rz = 320µm (-160µm~160µm) / 12600μin (-6300μin~+6300μin) |
Accuracy | ± 10% |
Repeatability | ± 6% |
Resolution | ± 20 μm: 0.01 μm ± 40 μm: 0.02 μm ± 80 μm: 0.04 μm |
Measurement Parameters | Ra, Rz, Rq, Rt, Rc, Rp, Rv, R3z, R3y, Rz (JIS), Ry, Rs, Rsk, Rku, Rmax, Rsm, Rmr, RPc, Rk, Rpk, Rvk, Mr1, Mr2 |
Measurement Standards | ISO4287, ANSI b46.1, DIN4768, JISb601 |
Graphic | Primary profile (roughness + waviness) Roughness profile (roughness) Loading curves |
Measuring filter | RC, PC-RC, Gaus, DP |
Measuring section (Cut Off) | 0.25 mm, 0.8 mm, 2.5 mm |
Measuring length | 1 ... 5* measuring path Max. 17.5 mm (including pre- and post-run) |
Sensor | Diamond probe tip 90° cone angle 5 μm |
Contact force sensor | <4 mN |
Feed rate | 0.25 mm: 0.135 mm / s 0.8 mm: 0.5 mm / s 2.5 mm: 1 mm / s |
Display | 3.5" LCD screen |
Power supply | 3.7V Li-Ion Battery 5V / 800-mA USB Power Adapter |
Operating time | 50 h |
Operating conditions | -20 ... 40°C / -4 ... 104°F, max. 90% rh |
Storage conditions | -40 ... 60°C / -40 ... 140°F, max. 90% rh |
Dimensions | Main unit: 158 x 55 x 52 mm / 6.2 x 2.2 x 2 in Motor unit: 115 x 23 x 27 mm / 4.5 x 1 x 1.1 in |
Weight | About 500 g / 1.1 lbs |
Price excl. VAT &. delivery
2 year Warranty
Sensor probe PCE-RP-131 for grooves for the PCE-RT 2300 Roughness Tester.
Price excl. VAT &. delivery
2 year Warranty
CAL-PCE-RT includes calibration of the instrument in accordance with applicable ISO standard(s), along with documentation containing all readings taken.*US calibration certificate is ISO 17025** Each calibration certificate is issued especially for the customer and instrument, and therefore is exempt from the right of return.