Laboratory Technology

• Measuring range up to 20,000 A/cm
• Axial magnetic field probe
• AC, DC and pulse measurements
• Measurement of residual magnetism possible

• Measuring range up to 20,000 A/cm
• Transverse field probe
• AC, DC and pulse measurements
• Measurement of residual magnetism possible

• Measuring range up to 20,000 A/cm
• Transverse tongue probe
• AC, DC and pulse measurements
• Measurement of residual magnetism possible

The air sampler is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air sampler determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

• Measurable particle sizes: PM2.5 / PM10
• Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
• Mass concentration
• Particle counter
• Temperature
• Humidity (RH)
• Flash memory for approx. 12 measurement runs

PCE-PCO 2 is a portable handheld air sampler or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature, dew point and relative humidity.

• PM channels:PM 2.5, PM 10, including mass concentration mode (µg/m³)
• Particle sizes (in micrometers): 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Temp. measuring range: 0 … +50 °C / +32 … +122 °F
• Humidity measuring range: 0 … 100 % RH
• Built-in camera for image and video recording
• Free software download on PCE Software web page

The PCE-PCO 2 is a portable handheld dust monitor used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this dust monitor also measures air temperature, dew point and relative humidity.

• PM channels:PM 2.5, PM 10, including mass concentration mode (µg/m³)
• Particle sizes (in micrometers): 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Temp. measuring range: 0 … +50 °C / +32 … +122 °F
• Humidity measuring range: 0 … 100 % RH
• Built-in camera for image and video recording
• Free software download on PCE Software web page

• Layer thickness: 2 ... 5000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 px)
• Data storage
• USB and wireless
• Standard FE probe with sliding sleeve and prism

• Measuring range up to 20,000 A/cm
• Angled axial probe
• AC, DC and pulse measurements
• Measurement of residual magnetism possible

• Layer thickness: 2 ... 5000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Standard FE probe with sliding sleeve and prism, swiveling

• Measuring direction: transversal
• Magnetic flux DC: ±3500 mT
• AC magnetic flux: 0.4 ... 3500 mT
• Resolution: 0.001 mT
• Accuracy DC: ±1% v.Mw. @ 100 ... 2400 mT
• Accuracy AC: ±3% v.Mw.
• Frequency display: 10 ... 5000 Hz
• Temperature measurement: 0 ... 80°C / 32 ... 176°F
• Units: µT, mT, G, A/m, Oe, WB/m², A/cm
• Data logger for up to 10 million measuring points

• Layer thickness: FE: 2 ... 5000 µm
• Coating thickness: NF: 2 ... 2000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Dual probe with sliding sleeve and prism

• Layer thickness: 2 ... 7000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• FE probe for thick layers with sliding sleeve and prism

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.

• Measurement geometry: 60° degree angle
• Measuring range: 0 … 300 GU
• Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
• Light source: D65
• Wave length: 400-700 nm

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).

• Measurement geometry: 60° degree angle
• Measurement up to 1000 gloss units
• Internal reading memory up to 5000 readings
• 3.5" TFT display
• Light source: D65
• Wave length: 400-700 nm

• Layer thickness: 2 ... 1000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 px)
• Data storage
• USB and wireless
• Rod-shaped transversal probe for small indoor spaces

• Layer thickness: 2 ... 6000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Rod-shaped transversal probe for interiors and pipes

The Roughness Tester PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.

• Measures Ra in Metric (µm) and Imperial (µinch)
• Ra 0.05 to 10um / 2 µinch … 400 µinch measurement range
• Rz 0.1 to 50um / 3.93 µinch … 1968.50 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• With threshold function
• Uses 4 AA Batteries (Included)

• Layer thickness: 2 ... 1000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 px)
• Data storage
• USB and wireless
• Spring-loaded measuring probe for small parts and complex surfaces

• Layer thickness: FE: 2 ... 5000 µm
• Coating thickness: NF: 2 ... 2000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Dual probe with sliding sleeve and prism, swiveling

• simulation of different illuminants
• hour counter for each illuminant
• short warm-up time
• LED lighting
• meets ASTM D1729, ISO3664, DIN, ANSI, BSI

The color matching cabinet is a simulation instrument, which is mainly used in quality control. The color matching cabinet accurately  corrects light types and thus enables the direct comparison of products which must have special color characteristics.

• Simulation of different light types
• Hour counter for each light type
• Short warm-up time
• LED light
• According to ASTM  D1729, ISO3664, DIN, ANSI, BSI

The PCE-CIC 11-US Color Matching is a simulation instrument, which is mainly used in quality control. The Color Matching accurately  corrects light types and thus enables the direct comparison of products which must have special color characteristics.

• Simulation of different light types
• Hour counter for each light type
• Short warm-up time
• According to ASTM D1729, ISO3664, DIN, ANSI, BSI

The simple design and an absolutely straightforward operation make it possible for the practitioner to use the adhesion tester as an instrument for daily adhesion tests. Using adhesive with rapid curing, the tests can be performed by the user in the shortest possible time.

• Breakout force: 200 kg
• Diameter of base dolly, mm: 15.1 (№ 1) and 19.5 (№ 2)
• Specific breakout force, MPa: Dolly №1 up to 10 MPa (100) Dolly  №2 up to 6 MPa (60)