The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm - Accuracy after foil calibration: ±(2% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67"
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm - Accuracy after foil calibration: ±(2% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67" - incl. ISO-Calibration Certificate
The car measuring device is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the car measuring device is inductive. To do this, the supply line is placed in the car measuring device.
- Measuring range: 0 ... 1500 V AC/DC - Free app for Android and iOS - Data logging for up to 100,000 measured values - Inrush current measurement - Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V
The car measuring device is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the car measuring device is inductive. To do this, the supply line is placed in the car measuring device.
- Measuring range: 0 ... 1500 V AC/DC - Free app for Android and iOS - Data logging for up to 100,000 measured values - Inrush current measurement - Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V - incl. ISO Calibration Certificate
The car measuring device is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the car measuring device.
The AC/DC car measuring device is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC car measuring device.
The car measuring device has a measuring range of 0 … 1000 A AC/DC. The current is measured inductively using the clamp on the measuring device. Live supply lines with a diameter of up to 32 mm (1.2") can be connected to the car measuring device.
- Measuring range: 0 ... 1000 A AC/DC - Bluetooth interface - Inrush current measurement - LC color display - Not Connected Voltage function
The car measuring device can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the car measuring device, or you can use the integrated clamp mechanism. By using the clamp of the car measuring device, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.
- Voltage: 600 V AC/DC - Current: 600 A AC/DC - Electrical Resistance: 1000 Ω - Clamp mechanism
The car measuring device can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the car measuring device, or you can use the integrated clamp mechanism. By using the clamp of the car measuring device, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.
- Voltage: 600 V AC/DC - Current: 600 A AC/DC - Electrical Resistance: 1000 Ω - Clamp mechanism - Incl. ISO Calibration Certificate
The car measuring device PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the car measuring device can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.
- Current measurement up to 1000 A - Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
The car measuring device PCE-DC 50-ICA is a meter for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the car measuring device can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.
- Current measurement up to 1000 A - Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
- incl. ISO Calibration Certificate
This car measuring device was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this car measuring device.
- AC/DC current, AC voltage and frequency measurement - AC voltage test (contactless test): 100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz - DCA zero point function
This car measuring device was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this car measuring device.
- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
PCE-DRA 1 is an antifreeze car measuring device used to determine the percentage or content and freezing point of propylene glycol- and ethylene glycol-based solutions. This waterproof IP65-rated car measuring device features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.
Measurement parameters: - Ethylene glycol %, propylene glycol %, temperature °C - Measuring range: 0 ... 60 % ethylene glycol - Resolution: 0.1 % / 0.1 ° - Accuracy: ±0.5 % / ±0.5 °C - Automatic temperature compensation (ATC) - Easy calibration with distilled water
The car measuring device uses the so-called "stroboscope effect" to analyse fast movements, vibrations or periodic processes. With the help of 9 high-intensity LEDs, the car measuring device generates short flashes of light with an illuminance of up to 1500 lx. These flashes of light are emitted in synchronisation with the frequency of the movement to be monitored until the object appears to stand still to the observer.
The car measuring device is a handy device for measuring the rotational speed of objects with a measuring range of 60 to 20,000 rpm. The car measuring device is suitable for inspecting objects with periodic movements and for detecting faults.
The car measuring device is a handy device for measuring the rotational speed of objects with a measuring range of 60 to 20,000 rpm. The car measuring device is suitable for inspecting objects with periodic movements and for detecting faults.
- Measuring range: 60 ... 20000 RPM
- Coarse adjustment: +10, +100 RPM
- Fine adjustment: +0.1, +1 RPM
- Accuracy: 0.05 %
- 2.1" LC display with illumination
- Data storage function up to 10 values - incl. ISO-calibrartion-certificate
The car measuring device PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This car measuring device has a small design and has a low weight. Thus, the car measuring device can be conveniently used even in measurements in hard to reach places.
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 2380 987 035 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
