ex. VAT, ex. delivery costs
- Measuring range: -150 … 150 mm / -5.9 … 5.9"
- Resolution: 0.01 mm / 0.0004"
- Accuracy: ±0.03 mm / 0.001"
- Incl. software
- Force measuring stand optional!
Dynamometer PCE-DFG N 5K | |
Measuring range | 0 ... 5,000 N / 1,124 lbs |
Resolution | 1 N / 0.22 lbs |
Accuracy | ± 0.1% of the measuring range |
Measurement units | N, kg, lb, KPa |
Display | 2.8" TFT graphic display |
Alarm Modes | Inside, Outside, Crack, Shutdown |
Sampling rate | 6 ... 1600 Hz |
Storage | 100 measurements |
Power supply | NiMH battery, 6V / 1600-mAh |
Battery life | About 10 hours |
Power adapter / charging adapter | 12V / 1A |
Outputs | Interface: USB Switching output: 12V / 50-mA |
Protection class | IP 54 |
Operating and storage conditions | -10 ... 50°C / 14 ... 122°F 5 ... 95% rh non-condensing |
Mounting thread measuring cell Up to 1,000 N / 225 lbs 2,500 ... 10,000 N / 562 ... 2,248 lbs |
M10 M12 |
Dimensions | 200 x 97 x 42 mm / 7.9 x 3.8 x 1.7 in |
Weight | 540 g / 1.2 lbs |
Test Stand PCE-MTS500 | |
Force range | max. 5000 N (500 kg / 1100 lbs) |
Travel distance | max. 300 mm / 11.8" |
Feed rate | 30 ... 230 mm/min / 1.18 ... 9.05 in/min |
Test table | Ø 160 mm/ 6.3" |
Sample width | max. 200 mm / 7.9" |
Guide columns | Ø 32 mm / 1.3" |
Dimensions | 1020 x 400 x 250 mm / 40.2 x 15.7 x 9.8" |
Weight | ca. 60 kg / 132 lbs |
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ISO re-calibration incl. certificate for force gauge over 50 kg / 500 N / 112 lbs. This is often required to comply with ISO/IEC 17025.
If your calibration certificate expires, you can easily return your meter for re-calibration.
We carry out the calibration and send you the device with a new calibration certificate.
Calibration certificates are issued specifically for the customer and are excluded from the right of return