ex. VAT, ex. delivery costs
- Thread connection: M10 to M6
- External thread: M10
- Internal thread: M6
PCE-DFG N 500
Digital force gauge
For tensile force measurement and pressure force measurement up to 500 N / Very high accuracy / Sampling rate 1600 Hz / 6 different measuring tips /
USB interface / Software
A digital force gauge for tensile and compressive force measurements up to 500 N is available with the PCE-DFG N 500. The PCE-DFG N 500 is a digital force meter for precise measurements with a resolution of 0.1 N. The measured values are displayed on a large, illuminated, 180° rotatable display, a correct reading of the measured values is thus guaranteed at all times, with an outstanding accuracy of ± 0.1%. In addition to the internal storage option of 100 measured values, a USB interface is available for data transmission. With the software, the measured values can be saved on a computer for later evaluation.
Due to its robust housing, a sensible menu navigation and the simple operation via 8 keys, the digital force meter PCE-DFG N 500 is characterized by a high degree of user-friendliness. The power supply of the dynamometer via batteries, which can be charged via a included charger and allow a continuous operation of the device of 10 hours. With these characteristics, the digital force gauge is suitable for quality control in the production area, for incoming and outgoing inspection as well as for the development of new components or for testing safety-relevant components.
Measuring range | 0 ... 500 N |
Accuracy | ± 0.1% of the measuring range |
Resolution | 0.1 N |
Measurement units | N, kg, lb, KPa |
Display | 2.8" TFT graphic display |
Alarm Modes | Inside, Outside, Crack, Shutdown |
Sampling rate | 6 ... 1600 Hz |
Storage | 100 measurements |
power supply | NiMh battery 6V / 1600-mAh |
Battery life | about 10 hours |
Charging adapter | 12V / 1A |
Outputs | Interface: USB Switching output: 12 V / 50-mA |
Protection class | IP 54 |
Operating and storage conditions | -10 ... 50°C / 14 ... 122°F 5 ... 95% rh non-condensing |
Force-receiving piece | 6 x 7 mm / .2 x .3 in |
Dimensions | 200 x 97 x 42 mm / 7.9 x 3.8 x 1.7 in |
Weight | 540 g / 1.2 lbs |
ex. VAT, ex. delivery costs
ISO re-calibration incl. certificate for force gauge max. 50 kg / 500 N / 112 lbs. This is often required to comply with DIN ISO 9000.
If your calibration certificate expires, you can easily return your meter for re-calibration.
We carry out the calibration and send you the device with a new calibration certificate.
Calibration certificates are issued specifically for the customer and are excluded from the right of return
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
Force test stand PCE-FTS50 with digital display is suitable for load cells with internal measuring cell, e.g. for the PCE-FM50, PCE-FM200, PCE-DFG N 200, PCE-DFG N 500, or PCE-PTR 200.
- with digital measuring distance display
- max. range of force 500 N
- maximum operating length of 236.36 mm / 9.30"
- the mounting plate ADP-UNI must be ordered at the same time!
ex. VAT, ex. delivery costs
PCE-MTS50 is a motorized universal testing machine (UTM) or material test stand for use with PCE-series force gauges. The motorized material test stand offers enhanced control and stability during force testing. It also helps to ensure the accuracy and repeatability of vertical tension and compression force test results.
- Maximum force measurement: 500 N / 50 kg
- Automatic or manual (push-button) operation
- Adjustable feed speed: 50 ... 500 mm / min
- AC power connection (110V or 220V)
-
Adjustable traverse / distance
*** The mounting plate ADP-UNI must be ordered for internal load cell force gauges!***
ex. VAT, ex. delivery costs
PCE-MTS50 is a motorized material test stand for use with PCE-series force gauges. The motorized material test stand offers enhanced control and stability during force testing. It also helps to ensure the accuracy and repeatability of vertical tension and compression force test results.
- Maximum force measurement: 500 N / 50 kg
- Automatic or manual (push-button) operation
- Adjustable feed speed: 50 ... 500 mm / min
- AC power connection (110V or 220V)
-
Adjustable traverse / distance
*** The mounting plate ADP-UNI must be ordered for internal load cell force gauges!***
ex. VAT, ex. delivery costs
Force test stand PCE-FTS50 with digital display is suitable for load cells with internal measuring cell, e.g. for the PCE-FM50, PCE-FM200, PCE-DFG N 200, PCE-DFG N 500, or PCE-PTR 200.
- with digital measuring distance display
- max. range of force 500 N
- maximum operating length of 236.36 mm / 9.30"
- the mounting plate ADP-UNI must be ordered at the same time!
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ISO re-calibration incl. certificate for force gauge max. 50 kg / 500 N / 112 lbs. This is often required to comply with ISO/IEC 17025.
If your calibration certificate expires, you can easily return your meter for re-calibration.
We carry out the calibration and send you the device with a new calibration certificate.
Calibration certificates are issued specifically for the customer and are excluded from the right of return