The air quality station is used to measure air quality. The air quality meter measures carbon dioxide, temperature and humidity. The CO2 sensor of the air quality station is disconnected from the main unit with a connection cable.
The Air Quality Station is used to measure air quality. The Air Quality Station measures carbon dioxide, temperature and humidity. The CO2 sensor from the Air Quality Station is disconnected from the main unit with a connection cable.
The Air Quality Station is an ideal measuring device for monitoring the air quality at workplaces. The health and Air Quality Station is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.
The air quality station is an ideal measuring device for monitoring the air quality at workplaces. The health and environmental air quality station is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.
The Air Quality Station is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The Air Quality Station is equipped with various sensors.
The air quality station is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The air quality station is equipped with various sensors.
The air quality station is a multi-function meter for measuring the air quality. This Air Quality Station measures synchronously the CO2 concentration, the air temperature and the humidity.
Measuring range CO2: 400 … 5000 ppm
Measuring range temperature: -10.0 … 50.0°C / 14 … 122°F
The Air Quality Station is a multi-function meter for measuring the air quality. This Air Quality Station measures synchronously the CO2 concentration, the air temperature and the humidity.
Measuring range CO2: 400 … 5000 ppm
Measuring range temperature: -10.0 … 50.0°C / 14 … 122°F
With the Air Quality Station you can ensure the right climate in your office. The Air Quality Station measures the CO2 content of the air, the relative humidity and the room temperature. The Air Quality Station shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.
With the Air Quality Station you can ensure the right climate in your office. The Air Quality Station measures the CO2 content of the air, the relative humidity and the room temperature. The Air Quality Station shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.
The air quality station has a CO² measuring range of 0 … 9999 ppm. In addition to the carbon dioxide measurement, the air quality station also has a carbon monoxide (CO) sensor with a measuring range of 0 … 1000 ppm and a temperature and humidity sensor.
The air quality station is equipped with various sensors to determine HCHO, TVOC, ambient temperature and ambient humidity. The air quality station thus already covers a large spectrum of measuring tasks.
HCHO measuring range: 0.00 … 5.00 mg/m³
TVOC measuring range: 0.00 … 9.99 mg/m³
Temperature measuring range: 0 … 50 °C / 32 … 122 °F
The Air Quality Station PCE-RCM 05 is used to continuously measure the particulate matter content at the workplace. The Air Quality Station displays PM2.5 particulate matter as well as temperature and humidity on the display.
Measuring range PM2.5: 0 … 500 μg / m³
Measuring range temperature: -10 … 50°C / 14 … 122°F
PCE-RCM 10 is a portable handheld air quality station or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this air quality station also measures air temperature and relative humidity (RH).
The Air Quality Station PCE-RCM 11 serves as an indicative test of environmental parameters. The Air Quality Station PCE-RCM 11 enables the measurement of fine dust, temperature and relative humidity. The bright display of the Air Quality Station provides information about the already mentioned parameters.
Fine dust, formaldehyde, humidity, temperature, TVOC
The Air Quality Station is ideal for monitoring the air quality in homes, businesses or public buildings where people are staying. The 4.3-inch TFT display on the Air Quality Station is dimensioned so that all measured values can be read directly.
The Air Quality Station PCE-RCM 8 performs many measuring tasks. For example, the Air Quality Station can measure mass concentration, formaldehyde and TVOC. This Air Quality Station is specially designed for indoor measurement.
The Air Quality Station from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this Air Quality Station is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.
3-Axis acceleration up to 800 Hz
32 GB SD memory card
Evaluation software
Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light
The Air Quality Station can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.
The Air Quality Station can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.
The air quality temperature humidity meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This air quality temperature humidity meter consists of an LED display (100 mm high) and is protected according to IP 54.
Temperature measuring range: 0 … +60 °C (Celsius only)
The air quality temperature humidity meter is a measuring device for stationary measurement of relative humidity and temperature. This air quality temperature humidity meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.
Temperature measuring range: 0 … +60 °C (Celsius only)
The PCE-HT110 Air Quality Meter or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.
PCE-VOC 1 is a portable handheld volatile organic compound (VOC) and formaldehyde (HCHO) meter or gas leak detector for indoor air quality (IAQ) monitoring applications. This easy-to-use VOC meter is ideal for measuring total volatile organic compound (TVOC) and formaldehyde (HCHO) levels in homes, offices, factories, laboratories, hotels, schools and other indoor environments.
PCE-AS1 is an air sampling meter used to assess microbiological pollution and monitor hygiene. Designed for use in hospitals, clean rooms, food, beverage, cosmetics, and pharmaceutical production facilities. The PCE-AS1 air sampler meets the latest requirements for devices used for airborne microbial analysis of bacterial and fungal counts. Rate is 100 lpm or 3.53 cfm with 300 micropores. **Optional ISO lab calibration listed under accessories**
Accommodates manual adjustment of air volumes from 10 to 6000 liters
Offers data storage for up to 99 parameters / 2000 measurement records
Aids in compliance with HACCP, FDA FMSA, USP 797 and ISO 14698-1
PCE-AS1 is an air sampling meter used to assess microbiological pollution and monitor hygiene. Designed for use in hospitals, clean rooms, food, beverage, cosmetics, and pharmaceutical production facilities. The PCE-AS1 Air Sampler meets the latest requirements for devices used for airborne microbial analysis of bacterial and fungal counts. Rate is 100 lpm or 3.53 cfm with 300 micropores. Optional ISO lab calibration listed under accessories
Accommodates manual adjustment of air volumes from 10 to 6000 liters
Offers data storage for up to 99 parameters / 2000 measurement records
Aids in compliance with HACCP, FDA FMSA, USP 797 and ISO 14698-1
The state-of-the-art air sampler enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air sampler is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The state-of-the-art air samplerenables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air sampler is performed by an internal pump.
PCE-MPC 10 is a portable handheld air sampler or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).
PM channels: PM 2.5, PM 10
Particle sizes (in micrometers): 2.5 µm, 10 µm
Temp. measuring range: 0 … +50 °C / +32 … +122 °F
Humidity measuring range: 0 … 100 % RH
2" full-color LCD with user-friendly graphics
Integrated data logger with adjustable sampling time
Internal memory stores up to 5000 date-and-time-stamped data sets
The air sampler is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air sampler determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.
The air sampler PCE-MPC 20 is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the particle collector are 0.3, 2.5 and 10 μm.
Measurable particle sizes: PM2.5 / PM10
Measuring range Mass concentration: 0 … 2000 μg / m³
The air sampler is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air sampler determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.