The PCE-MA 202-ICA is an oven-drying analytical balance for weighing and heating material samples to determine moisture content. The heating chamber warms up to 199 °C / 390 °F with the use of halogen lamps. Drying of the sample to be weighed takes place within the chamber of the analytical balance and the moisture content is subsequently calculated from the difference between the initial and final weight.
- Testing or weighing capacity: 200 g / 7.05 oz - Readability: 10 mg / 0.01 g / 0.1% - Adjustable drying temperature and time - incl. ISO Calibration Certificate
The precision analytical balance allows moisture determinations with a resolution of 0.001%. The operation of this analytical balance is very simple. Set the drying temperature, place the sample and start drying.
The precision analytical balance allows moisture determinations with a resolution of 0.001%. The operation of this analytical balance is very simple. Set the drying temperature, place the sample and start drying.
The analytical balance scale is a scale for daily laboratory use. Another function besides the normal measurement function of the analytical balance scale is the piece counting function. This function allows the analytical balance scale to determine the number of screws, for example.
- Measuring range: 0 ... 1100 g
- Resolution: 0.01 g
- Piece counting function
- RS-232 interface
- External calibration
The analytical balance scale is a scale for daily laboratory use. Another function besides the normal measurement function of the analytical balance scale is the piece counting function. This function allows the analytical balance scale to determine the number of screws, for example.
- Measuring range: 0 ... 310 g
- Resolution: 0.001 g
- Piece counting function
- RS-232 interface
- External calibration
The analytical balance scale is a scale for daily laboratory use. Another function besides the normal measuring function of the analytical balance scale is the piece counting function. This function allows the analytical balance scale to determine the number of screws, for example.
- Measuring range: 0 ... 5100 g
- Resolution: 0.1 g
- Piece counting function
- RS-232 interface
- External calibration
Anemometer with 4 ... 20 mA output. Anemometer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.
- Measuring range: 0 ... 50 m/s - Output signal: 4 ... 20 mA - Mounting: Pipe mounting / mounting via PG screw connection - Heating: yes
Anemometer with 0 ... 10 V output. Anemometer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.
- Measuring range: 0 ... 50 m/s - Output signal: 0 ... 10 V - Mounting: Pipe mounting / mounting via PG screw connection - Heating: yes
This anemometer is very economical. With this anemometer you can measure wind speed and air temperature.
- Speed measurement up to 45 m/s or 100 mph - Wind speed: 0.01 m/s, accuracy ±3% ±0.1 - Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F - Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface - Incl. ISO calibration certificate
Anemometer with port, memory, software for wind speed, temperature and air flow. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.
- Speed measurement up to 45 m/s or 100 mph - Wind speed: 0.01 m/s, accuracy ±3% ±0.1 - Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F - Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
The anemometer PCE-ADL 11 is a data logger for wind speeds. The configuration on the wind measuring device is carried out via the supplied software and provides multiple settings for measurement. You can buy the anemometer PCE-ADL 11 here in our online shop.
- Measuring range: 1.2 ... 30.0 m (3.9 ... 98.4 ft) / sec.
- Resolution: 0.01 m (0.03 ft) / s
- Measurement accuracy m / s: ± (3% + 0.20 m (0.7 ft) / s)
- Units selectable: km / h, knots, miles / h, ft / min
- Memory: for up to 60000 readings
- PC software
Our multifunctional anemometer PCE-EM 883 combines all important features for measuring the ambient conditions in one device. The anemometer is designed as fast as possible to determine as many parameters as possible. Due to the large number of external sensors that the anemometer brings with it, such fast and precise measurements are possible.
- Measurement of all relevant environmental parameters
- Wind speed
- Temperature
- Humidity
- Sound level
- Light
- High accuracy
- MIN, MAX, HOLD function
The anemometer PCE-EM 890 is an instrument for measuring environmental conditions.
Thus, this anemometer is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.
The anemometer has a measuring range of 0 ... 30 m / s. In addition to the air flow, the anemometer can also measure the ambient temperature between -20 ... 60°C / -4 ... 140°F and the ambient humidity between 0 ... 100% RH.
- Wind speed measuring range: 0.00 ... 30.00 m / s
- Temperature measuring range: -20 ... 60°C / -4 ... 140° F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm
- 390 mm / 15.4 in telescopic pole
- Bluetooth 4.0 interface
The anemometer has a measuring range of 0 ... 30 m/s. In addition to the air flow, the anemometer can also measure the ambient temperature between -20 ... 60 °C / -4 ... 140 °F and the ambient humidity between 0 ... 100% RH.
- Wind speed measuring range: 0.00 ... 30.00 m/s / 98 ft/s / 67 mph
- Temperature measuring range: -20 ... 60 °C / -4 ... 140 °F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm / 0.47"
- 390 mm / 15.4" telescopic pole
- Bluetooth 4.0 interface
- incl. ISO Calibration Certificate (wind speed function only)
The Anemometer impresses with its compact design and various output signals. The Anemometer can be used for applications in warning technology, building automation and home technology.
The Anemometer impresses with its compact design and various output signals. The Anemometer can be used for applications in warning technology, building automation and home technology.
The Anemometer impresses with its compact design and various output signals. The Anemometer can be used for applications in warning technology, building automation and home technology.
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.