Price excl. VAT &. delivery
2 year Warranty
- Test stand for mounting PCE-RT 1200, PCE-RT 2000 and PCE-RT 2200
- In combination with PCE-RT2000-RP110 and PCE-RT2000-RP131
Rz = average roughness
The average roughness Rz is the arithmetic mean of the largest single roughness depths of several adjacent individual measuring sections.
Ra = arithmetic centers roughness
Ra is the generally recognized and internationally applied roughness parameter. It is the arithmetic mean of the absolute values of the profile deviations within the reference line.
The measured value Ra is always smaller than the Rz value determined on the same roughness profile.
Measurement parameters | Ra, Rz, Rq, Rt |
Measuring ranges | Ra, Rq: 0.005 ... 16.00 µm / 0.197 ... 629.921 µin Rz, Rt: 0.002 ... 200.0 µm / 0.079 ... 7874.016 µin |
Radius probe tip | 5 µm/ 196.850 µin |
Material probe tip | Diamond, 90° angled |
Max. recommended force for static measurement | 4 mN (0.4 gf) |
Radius longitudinal guide bar | 45 mm / 1.77" |
Standards | ANSIB46.1/ASMEB46.1 (DIN EN ISO 4287) |
Maximum driving distance | 15 mm / 0.59" |
Measuring principle | Inductive |
Cut-off wavelength | 0.25 mm / 0.8 mm / 2.5 mm / 0.009" / 0.03" / 0.098" |
Testing speed | 0.135 mm/s at cut-off wavelength: 0.25 mm 0.5 mm/s at cut-off wavelength: 0.8 mm 1 mm/s at cut-off wavelength: 2.5 mm Reversing speed: 1 mm/s |
Measuring accuracy | < ± 10% |
Repeatability | < 6% |
Display | OLED |
Units | μm / μinch (switchable) |
Interface | Micro-USB |
Power supply | Rechargeable Li-ion battery |
Dimensions L x W x H | 150 x 60 x 43 mm / 5.9 x 2.36 x 1.69 in |
Weight | 370 g / < 1 lb |
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
Curved surface sensor suitable for PCE-RT 1200 und PCE-RT 2000. The sensor is used to measure surfaces with radii.
N.B. It is recommended to use this sensor with the test stand PCE-RT2000-Teststand.
Price excl. VAT &. delivery
2 year Warranty
CAL-PCE-RT includes calibration of the instrument in accordance with applicable ISO standard(s), along with documentation containing all readings taken.*US calibration certificate is ISO 17025** Each calibration certificate is issued especially for the customer and instrument, and therefore is exempt from the right of return.