NDT Tester - Hardness Tester PCE-HT 224E with Digital Display

Order no.: PCE-HT 224E
£ 529.00
£ 634.80
price ex. (VAT / delivery)
Delivery time: 1-2 working days
NDT Tester PCE-HT 224E with Digital Display
Mechanical concrete hardness tester with OLED / Measuring range 10 ... 60 N/mm² (1500 ... 8500 lbs/in² / Data storage analysis software / Built-in battery for mobile use / Test load 2.207 J / For measuring the quality of concrete surfaces

The NDT Tester is a measuring tool for testing the strength of concrete. The NDT Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the NDT Tester. Thus, the NDT Tester finds its essential application in the construction and in the construction sector. The NDT Tester is also suitable for testing the hrdness of rolled paper.  The built-in mechanism on the hardness tester always ensures the same impact energy of 2.207 Nm. 

In addition to testing concrete, the NDT Tester can also store measured data. The stored measurement data can be transferred from the NDT Tester to a PC after a measurement run. For this, the mini-USB interface is available on the NDT Tester. The evaluation of the measurements from the NDT Tester is carried out with the supplied PC software. 

The NDT Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm². The NDT Tester can be setup to measure at test angles of downward(-90°), downward(-45°), horizontal (0°), upward(45°), or upward(90°).

- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- OLED for reading the measured values
- USB interface for connection to a PC
- Measuring range 10 ... 60 N/mm², 1500 ... 8500 lbs / in² 
- Measurement of the hardness of concrete
- Data storage for later analysis
- Rechargeable battery for mobile use
Measuring range10 ... 60 N/mm² / 1500 ... 8500 PSI or lbs/in²
Accuracy± 0.1 R
Nominal kinetic energy2.207 Nm, 0.225 kgm
InterfaceBluetooth, micro USB
Storage1,000 data units with 256 measurements each
Operating conditions-40 ... 60°C / -40 ... 140°F
Power supply3.7V Li-ion battery
Power supply (power supply)         Primary: 100 ... 240V AC, 50/60 Hz
 Secondary: 5V DC, 1 A
Dimensions280 x 75 x 60 mm / 11 x 3 x 2.4 in
WeightAbout 1.2 kg / 2.6 lbs

1 x NDT tester - hardness tester PCE-HT 224E
1 x Mini USB cable
1 x Emery stone
1 x Software CD
1 x Charger
1 x Transport case
1 x User manual